+高级检索
电弧增材制造TC4钛合金不同扫描策略初生β晶粒宏观形态演变
作者:
作者单位:

西北工业大学

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划项目(2016YFB1100104)


Effects of different deposition strategies on prior-β grain morphology by wire and arc additive manufactured Ti-6Al-4V components
Author:
Affiliation:

Northwestern Polytechnical University

Fund Project:

National Key Research and Development Programme (2016YFB1100104)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    Abstract:

    Macrostructural characterisation was performed for Ti-6Al-4V components produced by wire and arc additive manufacturing (WAAM) to investigate the effects of different deposition direction and interlayer dwell time on grain morphology of prior-β. By extending the interlayer dwell time between each deposited layer, the full equiaxed β grain were obtained. The results indicated that the equiaxed β grains at the bottom were caused by recrystallization. The sizes of the equiaxed β grains at the bottom were both affected by the thermal cycle and the degree of recrystallization.

    参考文献
    相似文献
    引证文献
引用本文

王健.电弧增材制造TC4钛合金不同扫描策略初生β晶粒宏观形态演变[J].稀有金属材料与工程,2020,49(3):857~861.[王健. Effects of different deposition strategies on prior-β grain morphology by wire and arc additive manufactured Ti-6Al-4V components[J]. Rare Metal Materials and Engineering,2020,49(3):857~861.]
DOI:10.12442/j. issn.1002-185X.17Ti2019192

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2019-01-30
  • 最后修改日期:2019-06-25
  • 录用日期:2019-07-30
  • 在线发布日期: 2020-04-08
  • 出版日期: