+高级检索
不同催化剂对氢化铝锂(LiAlH4)可逆性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of Additives on the Reversibility of Lithium Alanate (LiAlH4)
Author:
Affiliation:

Fund Project:

National Natural Science Foundation Funded Projects(50806007)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过PCT(Pressure-Content-Temperature)设备研究了不同催化剂Ti、Ni、Fe、Ce(SO4)2 和 LaCl3对LiAlH4可逆储氢性能的影响。结果表明掺杂明显降低了试样的放氢速率,此外除了LaCl3,其他的掺杂还降低了试样的放氢温度,试样的放氢量也明显地下降了。掺杂1 mol% Ni, 1 mol% Ti, 1 mol% Ce(SO4)2 和 1 mol%LaCl3的LiAlH4可逆吸氢的研究发现,在180 ℃ 和 8 MPa氢压的条件下,掺杂1 mol% Ni的试样表现出

    Abstract:

    The effect of various catalysts, such as Ti, Ni, Fe, Ce(SO4)2 and LaCl3, on the reversibility of LiAlH4 was studied by Pressure-Content-Temperature (PCT) experiments. The result indicates that doping induces a marked decrease in the rate of hydrogen release. In addition, doping additives obviously decreases the initial temperature of LiAlH4 of hydrogen release except for doping with LaCl3. However, at the same time, the amount of hydrogen release also decreases. In the study on the hydrogen absorption of LiAlH4 doped with 1mol% Ni, 1mol% Ti, 1 mol% Ce(SO4)2 and 1mol%LaCl3 at 180 ℃ under about 8 MPa, it has been found that the sample doped with 1 mol% Ni presents the largest hydrogen absorption amount with about 0.97wt%.

    参考文献
    相似文献
    引证文献
引用本文

郑雪萍,李 平,曲选辉.不同催化剂对氢化铝锂(LiAlH4)可逆性能的影响[J].稀有金属材料与工程,2009,38(5):766~769.[Zheng Xueping, Li Ping, Qu Xuanhui. Effect of Additives on the Reversibility of Lithium Alanate (LiAlH4)[J]. Rare Metal Materials and Engineering,2009,38(5):766~769.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2008-08-23
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: