+高级检索
W Co C(碳黑)制备板状晶硬质合金及其性能研究
DOI:
作者:
作者单位:

南昌硬质合金有限责任公司,南昌大学材料科学与工程学院,南昌 330031

作者简介:

通讯作者:

中图分类号:

TF122

基金项目:

国家自然科学基金项目(面上项目,重点项目,重大项目);国家教育部博士点基金


Properties of Plate-like Grain Cemented Carbides prepared from W C Co base mixed powder
Author:
Affiliation:

Nanchang Cemented Carbide Co., Ltd.,School of Materials Science and Engineering, Nanchang University

Fund Project:

National Natural Science Foundation of China (51101017)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用经球磨扁平化处理的W粉末为原料,添加适量Co、C(碳黑)、成型剂及纳米W粉制备板状晶硬质合金,研究了烧结温度、时间和添加纳米W粉,对板状晶硬质合金显微组织结构和性能的影响。结果表明,球磨预处理中颗粒W粉末可获得扁平化程度高的薄片状W粉末,以其为原料制备的WC-12wt%Co板状晶合金相对密度达97 %,合金硬度呈现出明显的各向异性;添加纳米W粉或提高烧结温度、延长烧结时间,均有利于压坯烧结收缩致密化,生成更多的板状WC晶粒。

    Abstract:

    The WC-12wt%Co plate-like grain cemented carbides were prepared from plate-like W Co C (carbon black) base mixed powders. Effects of addition of nanometer tungsten powders and sintering processes on the microstructures and properties of plate-like grain cemented carbides were researched. It showed that the relative density of the WC-12wt%Co plate-like WC grain cemented carbides were near complete densification reached to 97%, the hardness of the alloys were exhibited obvious anisotropy, increasing the sintering temperature and prolonging sintering time or addition of nanometer tungsten powders were favor to sintering densification and the formation of more plate-like WC grains.

    参考文献
    相似文献
    引证文献
引用本文

雷纯鹏,唐建成. W Co C(碳黑)制备板状晶硬质合金及其性能研究[J].稀有金属材料与工程,2016,45(12):3155~3159.[leichunpeng, Tang Jiancheng. Properties of Plate-like Grain Cemented Carbides prepared from W C Co base mixed powder[J]. Rare Metal Materials and Engineering,2016,45(12):3155~3159.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2014-09-09
  • 最后修改日期:2014-10-14
  • 录用日期:2014-11-21
  • 在线发布日期: 2017-02-06
  • 出版日期: