+高级检索
首页 > 过刊浏览>2017年第46卷第4期 >1026-1032
PDF HTML阅读 XML下载 导出引用 引用提醒
电场增强的阴极弧放电TiCN薄膜结构及性能研究
作者:
作者单位:

哈尔滨工业大学 先进焊接与连接国家重点实验室,哈尔滨工业大学 先进焊接与连接国家重点实验室,哈尔滨工业大学 先进焊接与连接国家重点实验室,哈尔滨工业大学 先进焊接与连接国家重点实验室,哈尔滨工业大学 先进焊接与连接国家重点实验室,哈尔滨工业大学 先进焊接与连接国家重点实验室,哈尔滨工业大学 先进焊接与连接国家重点实验室

基金项目:

国家自然科学基金(51175118,U1330110)


Microstructure and Surface properties of TiCN Films Deposited Using Cathodic Arc Deposition Enhanced by Additional Electric Field
Author:
Affiliation:

State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology,State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology,State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology,State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology,State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology,State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology,State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology

  • 摘要
    • | |
  • 访问统计
    • |
  • 参考文献 [22]
    • |
  • 相似文献
    • | | |
  • 文章评论
    摘要:

    采用一种新型的电场增强阴极弧沉积技术在304不锈钢表面制备了TiCN涂层。研究了附加电极电流对阴极弧放电特性、涂层相结构、截面形貌、耐磨性以及结合力的影响。结果表明：附加电极的引入显著增加真空室内等离子体密度,工件偏流提高近100%；只要超过一定阈值,附加电极电流才能有效减小晶粒尺寸、提高膜层致密性,同时也提高膜基结合力。附加电极电流30A时,膜基结合力达到HF1,相对于与无附加电极情况样品表面摩擦系数降低了33%,磨痕宽度最小,耐磨性最好。可见电场增强阴极弧放电是一种非常有效的TiCN制备方法。

    Abstract:

    TiCN coatings have been deposited on 304 stainless steel by newly developed cathodic arc deposition enhanced by additional electric field. The effect of the current of additional electrode on cathode arc discharge, film microstructure, cross-sectional morphology, wear resistance and adhesion between film and substrate have been investigated. The experimental results show the plasma density has been substantially increased after introduction of additional electrode in the chamber and the substrate current is improved by nearly 100%. Only a properly higher current of additional electrode may effectively decrease the crystal size and make the film structure much denser, consequently the critical load of deposited films has been enhanced. The sample deposited at a 30A-current of additional electrode possesses the highest adhesion force between film and substrate (HF1), best wear-resistance featured by narrowest wear track. The friction coefficient may decrease by 33% compared to the sample fabricated without the assistance of additional electrode. In summary cathodic arc deposition enhanced by additional electric field is an effective tool to fabricate TiCN films.

    参考文献
    [1]Hangwei C,Yuan G,Lin Y,et al.Rare Metal Materials and Engineering(稀有金属材料与工程)[J],2014, 43(5):1084
    [2]Gor??ak ?, Panjan P, ?ekada M, et al.Surface Engineering [J],2007, 23(3): 177
    [3]Gerth J,Larsson M,Wiklund U,et al.Wear[J],2009, 266(3): 444
    [4]Zhang H,Tang S, Yan J,et al.International Journal of Refractory Metals and Hard Materials[J],2007,25(5): 440
    [5]Lin Z,Guoqiang L,Guojia M,et al.Rare Metal Materials and Engineering(稀有金属材料与工程)[J],2013,42: 83
    [6]闫少建.一种用PVD技术制备石墨烯或超薄碳膜的方法[S],CN 103266306 A,2013.8.28
    [7]Li H,Hu J,Lin G,et al.International Journal of Refractory Metals and Hard Materials [J],2010, 28(4): 544
    [8]Vetter J,Burgmer W,Perry A J.Surface and Coatings Technology [J],1993,59(1):152
    [9]Pelleg J, Zevin L Z, Lungo S, et al.Thin Solid Films[J], 1991,197(1):117
    [10]Greene J E,Sundgren J E,Hultman L et al.Applied physics letters[J],1995, 67(20): 2928
    [11]Ma C H,Huang J H,Chen HThin Solid Films[J],2004,446(2):184
    [12]Huang Meidong(黄美东),Lin Guoqiang(林国强),DongChuang (董闯),et al.Acta Metallurgica Sinica(金属学报)[J], 2004, 39(5): 510
    [13]Cheng Y H,Browne T,Heckerman B.Vacuum[J],2010, 85(1): 89
    [14]Zhang L,Ma G,Ma H et al.Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms[J],2014,333:1
    [15]Rosen J,Schneider J M,Anders A.Applied physics letters[J], 2006,89(14): 141502.
    [16]Ho W Y,Hsu C H,Chen C W,et al.Applied Surface Science[J], 2011, 257(8): 3770
    [17]Zhang S,Sun D,Fu Y,et al.Surface and Coatings Technology[J], 2005,198(1):74
    [18]Li J,Zhang S,Li M.Applied Surface Science[J],2013, 283: 134
    [19]Ma T B,Hu Y Z,Wang H.Carbon[J],2009,47(8): 1953
    [20]Zhang Xueqian(张学谦),Huang Meidong(黄美东),Ke Peiling (柯培玲),et al.Chinese Journal of Vacuum Science and Technology(真空科学与技术学报)[J],2013,33(10):969
    [21]Huang S W,Ng M W,Samandi M, et al.Wear[J],2002,252(7):566
    [22]Wang Y,Li H,Ji L,et al.Surface and Coatings Technology[J], 2011, 205(8):3058
    相似文献
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

孔营,马英鹤,李永健,胡健,高峻峰,巩春志,田修波.电场增强的阴极弧放电TiCN薄膜结构及性能研究[J].稀有金属材料与工程,2017,46(4):1026~1032.[Kong Ying, Ma Ying-he, Li Yong-jian, Hu Jian, Gao Jun-feng, Gong Chun-Zhi, Tian Xiu-bo. Microstructure and Surface properties of TiCN Films Deposited Using Cathodic Arc Deposition Enhanced by Additional Electric Field[J]. Rare Metal Materials and Engineering,2017,46(4):1026~1032.]
DOI：[doi]

复制
文章指标
  • 点击次数:1437
  • 下载次数: 1218
  • HTML阅读次数: 165
  • 引用次数: 0
历史
  • 收稿日期:2014-12-24
  • 最后修改日期:2015-05-13
  • 录用日期:2015-06-11
  • 在线发布日期: 2017-08-04

总访问量 36082137

地址：西安市未央区未央路96号 邮政编码：710016 联系电话：029－86231117

E-mail：rmme@c-nin.com; rmme0626@aliyun.com

版权所有:稀有金属材料与工程 ® 2025 版权所有 技术支持:北京勤云科技发展有限公司 ICP:陕ICP备05006818号-3