+高级检索
均匀化退火处理对AZ91镁合金轧制成形行为的影响
DOI:
作者:
作者单位:

太原理工大学材料科学与工程学院,太原理工大学材料科学与工程学院,太原理工大学材料科学与工程学院,太原理工大学材料科学与工程学院,太原理工大学材料科学与工程学院,太原理工大学材料科学与工程学院

作者简介:

通讯作者:

中图分类号:

TG146.2

基金项目:

国家自然科学基金资助(项目号51474152)


Effect of Homogenizing annealing treatment on AZ91 magnesium alloy rolling deformation behavior
Author:
Affiliation:

College of Materials Science and Engineering,Taiyuan University of Technology,Shanxi Taiyuan Key Laboratory of Advanced Magnesium Based Materials of Shanxi Province,Shanxi Taiyuan,College of Materials Science and Engineering,Taiyuan University of Technology,Shanxi Taiyuan Key Laboratory of Advanced Magnesium Based Materials of Shanxi Province,Shanxi Taiyuan,College of Materials Science and Engineering,Taiyuan University of Technology,Shanxi Taiyuan Key Laboratory of Advanced Magnesium Based Materials of Shanxi Province,Shanxi Taiyuan,College of Materials Science and Engineering,Taiyuan University of Technology,Shanxi Taiyuan Key Laboratory of Advanced Magnesium Based Materials of Shanxi Province,Shanxi Taiyuan,College of Materials Science and Engineering,Taiyuan University of Technology,Shanxi Taiyuan Key Laboratory of Advanced Magnesium Based Materials of Shanxi Province,Shanxi Taiyuan,College of Materials Science and Engineering,Taiyuan University of Technology,Shanxi Taiyuan Key Laboratory of Advanced Magnesium Based Materials of Shanxi Province,Shanxi Taiyuan

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为改善铸态AZ91镁合金组织不均匀性,提高其轧制成形能力,本文研究了均匀化退火处理对AZ91镁合金轧制变形前后微观组织及力学性能的影响。实验结果表明:均匀化退火处理可以有效改善合金组织中第二相分布;经400℃、多道次轧制后,沿晶界附近分布的细长条状Mg17Al12相数量显著减少,部分脆性Mg17Al12相发生断裂,以小颗粒状弥散分布于晶界附近和基体内部。均匀化后轧制组织比原始轧制组织强度略有提高,而伸长率提高达50%。轧制后的拉伸断口形貌也显示合金塑性得到明显改善。这为后续进一步研究AZ91镁合金在不同工艺参数条件下的轧制成形奠定基础。

    Abstract:

    To improve the inhomogeneity and rolling forming ability of as-cast AZ91 magnesium, the effect of homogenizing annealing treatment on microstructure and mechanical properties of AZ91 magnesium alloy before and after rolling deformation was studied. The results showed that the distribution of second phase in the alloy tissue was improved effectively after homogenization annealing treatment. After multi-pass rolling at 400℃, the thin strip Mg17Al12 phase which originally distributed along the grain boundaries reduces significantly, with some of them fragmented, and some distributed near the grain boundaries or inside the grains as small particles. Compared with the strength of as-cast rolling structure, the strength of rolling structure after homogenization increases slightly; while the elongation increases by 50%.The tensile fracture morphology after rolling also shows that the ductility of alloy improves significantly. This lays a foundation for further study on the rolling forming of AZ91 magnesium alloy under different technological parameters.

    参考文献
    相似文献
    引证文献
引用本文

郑留伟,梁伟,赵子龙,李亚娥,王红霞,王一德.均匀化退火处理对AZ91镁合金轧制成形行为的影响[J].稀有金属材料与工程,2016,45(5):1296~1301.[Zheng Liuwe, Liang Wei, Zhao Zilong, Li Yae, Wang Hongxia, Wang Yide. Effect of Homogenizing annealing treatment on AZ91 magnesium alloy rolling deformation behavior[J]. Rare Metal Materials and Engineering,2016,45(5):1296~1301.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2015-05-07
  • 最后修改日期:2015-08-06
  • 录用日期:2015-09-07
  • 在线发布日期: 2016-06-02
  • 出版日期: