+高级检索
单晶γ-TiAl合金纳米切削过程的分子动力学模拟
作者:
作者单位:

兰州理工大学

作者简介:

通讯作者:

中图分类号:

TH161

基金项目:

国家自然科学基金项目NO.51665030;长江学者和创新团队发展计划NO.IRT_15R30;兰州理工大学博士基金;甘肃省教育厅研究生导师基金项目(2016A-012)


Molecular dynamics simulations of nanometric cutting process of single crystal γ - TiAl alloy
Author:
Affiliation:

LanZhou University Of Technology

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文采用分子动力学方法研究了单晶γ-TiAl合金纳米切削过程,通过对单晶γ-TiAl合金建模、计算和分析,分析了不同切削深度和速度对切削过程的影响,研究结果发现:在切削过程中,随着切削深度增大,切屑体积逐渐增大,切屑中原子排列越来越紧密,位错密度也会随之增大;随着切削速度增大,位错密度反而会随之降低。在一定的切削深度和速度范围内,切削过程中刀具前方都会产生“V”型位错环,工件温度和势能也都会相应增大。特别是,切削速度为400m/s时,刀具前方的切削表面上未出现原子错排。

    Abstract:

    In this study, molecular dynamics simulations are employed to study the nanometric machining process of single crystal γ - TiAl alloy. The influences of different cutting speeds and depths on nanometric cutting process of single crystal γ - TiAl alloy are?studied by?molecular dynamics modeling, calculation and analysis.?The results show that the accumulated volume of chips increases with the cutting depth increases in nano-cutting process, at the same time the atoms in the chip stack are tighter and the dislocation density is increased; however the dislocation density decreased with the cutting speeds increases. In a certain cutting depth and speeds range, in front of the tool will produce "V"-type dislocation ring of the cutting process, temperature and potential energy of the workpiece will increased correspondingly. In particular, when the cutting speed is 400m/s, there is no atomic misalignment on the cutting surface in front of the tool.

    参考文献
    相似文献
    引证文献
引用本文

冯瑞成,乔海洋.单晶γ-TiAl合金纳米切削过程的分子动力学模拟[J].稀有金属材料与工程,2019,48(5):1559~1566.[fengruicheng, qiaohaiyang. Molecular dynamics simulations of nanometric cutting process of single crystal γ - TiAl alloy[J]. Rare Metal Materials and Engineering,2019,48(5):1559~1566.]
DOI:10.12442/j. issn.1002-185X.20171010

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-11-08
  • 最后修改日期:2018-04-12
  • 录用日期:2018-04-26
  • 在线发布日期: 2019-06-04
  • 出版日期: