+高级检索
首页 > 过刊浏览>2019年第48卷第6期 >1769-1776. DOI:10.12442/j.issn.1002-185X.20180049
PDF HTML阅读 XML下载 导出引用 引用提醒
Mg-9Zn-xAl合金半固态成形的热力学分析及试验研究
作者:
作者单位:

商洛学院

中图分类号:

TG146.2

基金项目:

国家自然科学基金项目（面上项目，重点项目，重大项目）


Thermodynamic analysis and experimental investigation of Mg-9Zn-xAl alloy for semi-solid processing
Author:
Affiliation:

Shangluo University

Fund Project:

Project(51464031, 51471123) supported by the National Natural Science Foundation of China; Project(16JK1241) supported by Scientific research plan of Shaanxi Education Department; Project(SK2016-29) supported by the planned Science and Technology of Shangluo City.

  • 摘要
    • | |
  • 访问统计
    • |
  • 参考文献 [20]
    • |
  • 相似文献 [20]
    • | | |
  • 文章评论
    摘要:

    采用相图计算软件Pandat计算了Mg-9Zn-xAl(x=2, 4, 6)合金的凝固温度窗口、固相率对温度的敏感性、温度加工窗口和相组成及其转变路径，并进行了实验验证。结果表明：Mg-9Zn-xAl镁合金适合进行半固态成形，其半固态加工温度窗口较大，易于进行半固态成形操作，且在半固态加工温度区间，其固相率对温度的敏感性均小于0.015。当Al含量不同时，其相的转变温度和路径不同。Mg-9Zn-xAl在凝固过程中均形成α-Mg、MgZn，Mg32(Al,Zn)49和Al5Mg11Zn4相，当Al含量增加至6%时形成了Mg17Al12相。自孕育流变成形Mg-9Zn-xAl合计的晶粒尺寸和圆整度分别为65.3μm、56.5μm、52.2μm和1.3、1.19、1.23。当工作温度为150℃时，其抗压强度和抗压变形量分别为278MPa、283MPa、295MPa和36.22%、33.02%、31.21%。

    Abstract:

    Solidification temperature range, temperature sensitivity of solid fraction, temperature process window and phase composition and transformation path of Mg-9Zn-xAl(x=2,4,6) were calculated by Pandat calculation, and studied by experiment. The results indicate that the bigger temperature window is conducive to the control and operation of semi-solid forming for Mg-9Zn-xAl alloy, and the temperature sensitivity of solid fraction is all smaller than 0.015. Mg-9Zn-xAl alloy has the different transformation temperature and path of the phase at the different Al addition. α-Mg, MgZn, Mg32(Al,Zn)49 and Al5Mg11Zn4 were formed in all samples, when Al addition is increased to 6%, Mg17Al12 phase was formed. The grain size and roundness of Mg-9Zn-xAl alloys which prepared by self-inoculation rheo-diecasting method are 65.3μm, 56.5μm, 52.2μm and 1.3, 1.19, 1.23 respectively. When the operating temperature is 150℃, the comprehensive strength and deformation are 278MPa, 283MPa, 295MPa and 36.22%, 33.02%, 31.21% respectively.

    参考文献
    [1] Hirsch J, Al-Samman T. Acta MATERILIA[J], 2013(61): 818-843.
    [2]Hu Y, Rao L, Li Q P et al.Rare metal materials and engineering[J], 2016, 45(2): 493-497. (in Chinese)
    [3]Zhou B, Kang Y L, Qi M F et al. Journal of Materials Engineering[J], 2014, 42(10): 1-5. (in Chinese)
    [4] Wan X F, Ni H J, Ming-yu Huang M Y et al. Transactions of Nonferrous Metals Society of China[J], 2013, 23(4): 896-903.
    [5] Chen Y A, Gao J J, Yu S et al. Materials Science & Engineering A[J], 2016(671): 127-134.
    [4][6] Feng K, Huang X F, Ma Y et al. The Chinese Journal Nonferrous Metals[J], 2011, 21(9): 2035- 2042. (in Chinese)
    [7] Mile B. Djurdjecvic, Rainer Schmid-Fetzer. Materials Science and Engineering A[J], 2006, 417(1-2): 24-33.
    [8] Agnew S R, Nie J F. Scripta Materialia[J], 2010, 63(7): 671-673.
    [9] Maciel Camacho A, Atkinson H V, Kapranos P.Acta Materialia[J], 2003, 51(8): 2319-2330.
    [10] Liu D, Atkinson H V, Jones H. Acta Materialia[J], 2005, 53(14): 3807-3819.
    [11] Li Y D, D. APELIAN, Xing B et al. Transactions of Nonferrous Metals Society of China[J], 2010, 20(9): 1572-1578.
    [12] Gr?bner J, Kozlov A, Fang X F et al. Acta Materialia[J], 2015, 90(): 400-416.
    [13] Liu J T, Zhang Y A, Li X W et al. Transactions of Nonferrous Metals Society of China[J], 2014, 24(5): 1481-1487.
    [14] Xia X Y, Sanaty-Zadeh A, Zhang C et al. Journal of Alloys and Compounds[J], 2014(593): 71-78.
    [15] Chen S L, Daniel S, Zhang F et al. Calphad[J], 2002, 26(2): 175-188.
    [16] Pola A, Roberti R, Bertoli E et al. Proceedings of the 9th S2P Advanced Semi-Solid Processing of Alloys and Composities[C], Busan, Korea: Trans Tech Pulications LTD., 2006: 58-63.
    [17] Gottardi G, Pola A, La Vecchia G M. La Metallurgia Italiana[J], 2015(5): 11-16.
    [18] Anynwu L A, Kamado S, Honda T. Materials Science forum[J], 2000, 350/351: 73-78.
    [19] Xing B, Li Y D, Feng J Y et al. Metals[J], 2016, 6(3): 69-76.
    [20] Wang C J, Jin Q L, Zhou R et al. Rare metal materials and engineering[J], 39)(Suppl.1): 208-211. (In Chinese)
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

李春,崔乐,范新会. Mg-9Zn-xAl合金半固态成形的热力学分析及试验研究[J].稀有金属材料与工程,2019,48(6):1769~1776.[Li Chun, Cui Le, Fan Xinhui. Thermodynamic analysis and experimental investigation of Mg-9Zn-xAl alloy for semi-solid processing[J]. Rare Metal Materials and Engineering,2019,48(6):1769~1776.]
DOI：10.12442/j. issn.1002-185X.20180049

复制
文章指标
  • 点击次数:938
  • 下载次数: 1252
  • HTML阅读次数: 142
  • 引用次数: 0
历史
  • 收稿日期:2018-01-13
  • 最后修改日期:2018-04-21
  • 录用日期:2018-04-26
  • 在线发布日期: 2019-07-30

总访问量 36078494

地址：西安市未央区未央路96号 邮政编码：710016 联系电话：029－86231117

E-mail：rmme@c-nin.com; rmme0626@aliyun.com

版权所有:稀有金属材料与工程 ® 2025 版权所有 技术支持:北京勤云科技发展有限公司 ICP:陕ICP备05006818号-3