+高级检索
烧结温度对Micro-FAST制备TiAl合金组织和性能的影响
作者:
作者单位:

四川大学制造科学与工程学院

基金项目:

国家自然科学基金资助(项目号51675357)


Effects of Sintering Temperatures on Microstructures and Properties of TiAl Alloy by Micro-FAST
Affiliation:

Sichuan Universty

  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献 [20]
  • |
  • 相似文献 [20]
  • |
  • 引证文献
  • | |
  • 文章评论
    摘要:

    为解决TiAl合金成型困难的问题,以Ti、Al元素粉末为原料,采用Micro-FAST制备Ti-47Al合金,研究了不同温度(700~1050℃)对TiAl合金组织和性能的影响,并且探究了烧结过程中颗粒的迁移机制。结果表明,700℃烧结时不能形成典型组织,主要相为TiAl3;800℃及以上烧结时为岛状组织,主要相为大量的TiAl和少量的Ti3Al;在1050℃烧结时具有最佳的综合力学性能。烧结过程由多种扩散机制共同控制,随着烧结的进行,依次为蒸发-凝聚、体积扩散、晶界扩散和表面扩散。

    Abstract:

    In order to solve the problem of forming difficulty of TiAl alloy, Ti-47Al alloy was sintered by Micro-FAST using Ti and Al element powders as raw materials. The effects of temperatures (700~1050 °C) on the microstructures and properties of TiAl alloy were studied, and the migration mechanisms of particles during sintering were investigated. The results show that typical microstructures can’t be formed during sintering at 700°C, and the main phase was TiAl3. When sintering at 800°C and above, the island structure was formed, and the Ti-47Al alloy was mainly composed of TiAl and a small amount of Ti3Al. It has the best comprehensive mechanical properties when sintered at 1050°C. The sintering process was controlled by a variety of diffusion mechanisms. As the holding time increases, evaporation condensation, volume diffusion, grain boundary diffusion and surface diffusion occurred in sequence.

    参考文献
    [1] Leyens, C.; Peters, M. Titanium and Titanium Alloys: Fundamentals and Applications[M].Wiley-VCH: Weinheim, Germany, 2003.
    [2] Chen Yuyong(陈玉勇), Su Yongjun(苏勇君), Kong Fantao(孔凡涛). Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2014, 43(3): 757-762.
    [3] Zhang Chen(张琛), Yang Sen(杨森), Yan Yingbiao(颜银标).Ordnance Material Science and Engineering(兵器材料科学与工程)[J], 2017, 40(4): 126-131.
    [4] Huang Kunlan(黄坤兰), Yang Yi(杨屹), Yin Deqiang(尹德强) et al. Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2015, 44(02): 365-369.
    [5] Gao Yi(高翌), Zhao Dan(赵旦), Liu Jian(刘剑)et al. Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2017,46(8):2190-2196.
    [6] Zhou Yu(周宇), Jiang Wei(姜薇), Chen Yitong(陈依桐)et al. Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2017,46(02):561-564.
    [7] Trzaska Z, Bonnefont G, Fantozzi G et al. Acta Materialia[J], 2017, 135.
    [8] J Guyon, A Hazotte, J P Monchoux et al. Intermetallics[J], 2013, 34(34):94-100.
    [9] Zhang Chi(张驰), Wang Yan(王岩), Zhao Shouxin(赵守鑫)et al. The Chinese Journal of Nonferrous Metals(中国有色金属学报)[J], 2016, 26(8):1624-1631.
    [10] Li Daren(李达人), Xu Shunyou(徐顺有), Cai Yixiang(蔡一湘)et al. Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2013,42(S2):277-279.
    [11] Liu H W, Bishop D P, Plucknett K P. Journal of Materials Science[J], 2017, 52(1):613-627.
    [12] Liu Yong(刘咏),Huang Boyun (黄伯云), Zhou Kezhao(周科朝)et al. Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2000(04):251-254.
    [13] F Appel, J D H Paul, M Oehring. Gamma Titanium Aluminide Alloys[M], Wiley,Weinheim, Germany, 2011, p. 168.
    [14] Chen Wayne. Gleeble System and Application[M]. Newyork,USA: Gleeble System School, 1998
    [15] Zhou Hongling(周虹伶), Feng Keqing(冯可芹), Li Ya(李娅)et al. Advanced Eengineering Sciences(工程科学与技术)[J], 2017,49(S2):244-250.
    [16] Wang Yanxing(王衍行), Lin Junpin(林均品), He Yuehui(贺跃辉)et al. Materials Reviews(材料导报)[J], 2007, 21(1):83-85.
    [17] Sujata M , Bhargava S , Sang L S. Journal of Materials Science Letters [ J] . J Mater Sci Let t, 1996 , 16 :1175
    [18] S Ke, K Feng, H Zhou et al. Materials and Manufacturing Processes[J], 2017, 32(12): 1398-1402
    [19] Chen Xi(陈曦),Yang Gang(杨刚),Yang Yi(杨屹)et al. Transactions of Materials and Heat Treatment(材料热处理学报)[J], 2014,35(02):24-28.
    [20] Ruan Jianming(阮建明), Huang Peiyun(黄培云)et al. Principle of powder metallurgy (粉末冶金原理)[M]. Beijing: Mechanical Industry Press, 2012
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

秦媛,杨刚,杨屹,吴明霞.烧结温度对Micro-FAST制备TiAl合金组织和性能的影响[J].稀有金属材料与工程,2020,49(1):337~342.[Qin Yuan, Yang Gang, Yang Yi, Wu Mingxia. Effects of Sintering Temperatures on Microstructures and Properties of TiAl Alloy by Micro-FAST[J]. Rare Metal Materials and Engineering,2020,49(1):337~342.]
DOI:10.12442/j. issn.1002-185X.20181120

复制
文章指标
  • 点击次数:755
  • 下载次数: 1238
  • HTML阅读次数: 158
  • 引用次数: 0
历史
  • 收稿日期:2018-11-07
  • 最后修改日期:2018-11-28
  • 录用日期:2019-01-10
  • 在线发布日期: 2020-02-16