+高级检索
定向多孔GH3536微观结构控制及其力学性能
作者:
作者单位:

西安交通大学机械制造系统工程国家重点实验室

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助(项目号51775418),广东省科技项目(项目号2017B090911006)


Microstructure control and Mechanical Properties of Oriented Porous GH3536
Author:
Affiliation:

State Key Laboratory of Manufacturing Systems Engineering,School of Mechanical Engineering,Xi’an Jiaotong University,Xi’an

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以GH3536高温合金粉末为原料,通过添加稳定剂制得稳定的浆料,采用定向冷冻成型制备了定向多孔高温合金。结果表明:添加0.4~1wt.%的瓜尔豆胶或者1~3wt.%的羧甲基纤维素钠作为稳定剂可制备稳定的浆料;随着浆料固相含量从10vol.%增加到30vol.%,定向孔径从308μm减少到198μm,壁厚从 81μm增加到223μm,其轴向压缩强度从10.72MPa增加到75.02MPa,径向压缩强度从9.2MPa增加到78.49MPa;采用固相含量10~30vol.%的浆料制备的定向多孔高温合金是一种塑性材料,固相含量越高其吸能能力越好。

    Abstract:

    Oriented porous superalloy was prepared by freeze-casting with GH3536 powder as raw material and guar gum/CMC-Na as stabilizers. The results show that slurries could be stabilized by adding 0.4~1wt.% of guar gum or 1~3wt.% of sodium carboxymethylcellulose; as the solid loading increases from 10vol.% to 30vol.%, the width of oriented pore decreases from 308μm to 198μm and the wall thickness increases from 81μm to 223μm, with the axial and radial compressive strength improving from 10.72MPa and 9.2MPa to 75.02MPa and 78.49MPa, respectively. The fabricated oriented porous superalloy is a plastic material with the ability of absorbing energy.

    参考文献
    相似文献
    引证文献
引用本文

赵洪炯,鲁中良,曹继伟,徐文梁,李涤尘.定向多孔GH3536微观结构控制及其力学性能[J].稀有金属材料与工程,2020,49(5):1694~1700.[Hongjiong Zhao, Zhongliang Lu, JiWei Cao, WenLiang Xu, DiChen Li. Microstructure control and Mechanical Properties of Oriented Porous GH3536[J]. Rare Metal Materials and Engineering,2020,49(5):1694~1700.]
DOI:10.12442/j. issn.1002-185X.20190108

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2019-01-28
  • 最后修改日期:2019-03-10
  • 录用日期:2019-04-10
  • 在线发布日期: 2020-06-05
  • 出版日期: