+高级检索
试样高宽比对反复镦压影响的数值模拟与实验研究
作者:
作者单位:

1.江苏科技大学 材料科学与工程学院;2.江苏大学 材料科学与工程学院;3.江苏金源高端装备股份有限公司

作者简介:

通讯作者:

中图分类号:

TG316.3

基金项目:

国家自然科学基金资助项目(项目编号:51775249);江苏省高等学校大学生实践创新训练计划项目(项目编号:201910289061Y);江苏省双创博士计划项目


Numerical and experimental investigation of the effect of height-width ratio of the sample on cyclic channel die compression process
Author:
Affiliation:

1.School of Materials Science and Engineering,Jiangsu University of Science and Technology;2.School of Materials Science and Engineering,Jiangsu University;3.Jiangsu Jinyuan Forging Co,Ltd

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    反复镦压可以在不改变试样形状和尺寸的情况下获得大变形。高宽比是影响反复镦压工艺的重要参数之一。本文采用有限元与实验验证相结合的方法研究了高宽比对纯铜试样镦压变形过程、微观组织及性能的影响。结果表明,镦压后的等效应变分布不均匀,高宽比越大,单道次镦压平均等效应变和等效应力都越高。1道次镦压后,晶粒被压扁,随高宽比增大,晶粒被压扁的程度越严重。3道次变形后形成了大量变形带,试样高宽比越大,变形带越窄。12道次镦压后,高宽比为2的试样晶粒更等轴、细小。镦压后纯铜的硬度明显提高,高宽比为2的试样镦压后硬度值更高。

    Abstract:

    Severe plastic deformation can be achieved in the sample via cyclic channel die compression (CCDC) without changing its shape and size. The height/width ratio is one of the important parameters that affect the CCDC process. A finite element method and experimental validation are employed to investigate the effect of height/width ratio of the sample on compression process, microstructure and properties in this study. The results show that the effective strain is inhomogeneous after deformation. The larger the height/width ratio is, the larger the average effective strain for a single pass compression, and the higher the effective stress. After one pass, grains are squashed, and more serious as the height/width ratio increases. After 3 passes, a large number of shear bands are formed, and become narrow with the increase of height/width ratio. After 12 passes, more equiaxed and finer grains are obtained in the sample with height/width ratio of 2. Hardness of pure copper increases significantly after CCDC, and the hardness value of the sample is higher with height/width ratio of 2.

    参考文献
    相似文献
    引证文献
引用本文

石凤健,张健伟,王雷刚,邵勇,葛艳明,叶思珍,王浩.试样高宽比对反复镦压影响的数值模拟与实验研究[J].稀有金属材料与工程,2020,49(9):3170~3176.[SHI Fengjian, ZHANG Jianwei, WANG Leigang, SHAO Yong, GE Yanming, YE Sizhen, WANG Hao. Numerical and experimental investigation of the effect of height-width ratio of the sample on cyclic channel die compression process[J]. Rare Metal Materials and Engineering,2020,49(9):3170~3176.]
DOI:10.12442/j. issn.1002-185X.20190702

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2019-08-25
  • 最后修改日期:2019-12-27
  • 录用日期:2020-01-03
  • 在线发布日期: 2020-10-15
  • 出版日期: