+高级检索
Ti-6Al-4V钛合金组成相微观变形行为影响因素
作者:
作者单位:

1.湖北理工学院机电工程学院;2.燕山大学国家冷轧板带装备及工艺工程技术研究中心

作者简介:

通讯作者:

中图分类号:

基金项目:

湖北理工学院人才引进项目


Influencing Factors of Micro Deformation Behavior of Constituent Phases in Ti-6Al-4V Titanium Alloy
Author:
Affiliation:

1.School of Mechanical and Electrical Engineering,Hubei Polytechnic University;2.National Engineering Research Center for Equipment and Technology of Cold Strip Rolling,Yanshan University

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文基本真实组织图像建立了Ti-6Al-4V合金的微观力学有限元模型,考虑合金双相特征研究了室温单轴拉伸时的微观变形行为。结果表明:外部加载力主要由较硬的β转变组织承担,而塑性变形主要由较软的初生α相承担,即便在相同相内部,不同位置的应力和应变也存在差异。随宏观应变增大,初生α相与β转变组织的应变比、β转变组织与初生α相的应力比首先基本保持不变,而后迅速增大,最后保持稳定。初生α相的体积分数和晶粒尺寸对组成相内部的应变和应力分布有显著影响,随体积分数增大或晶粒尺寸减小,应变比和应力比分别增大和减小。

    Abstract:

    In this paper, A micro-mechanics finite element model is established based on the realistic microstructure of Ti-6Al-4V alloy. And considering the dual-phase characteristic, the micro deformation behaviors during the uniaxial tension at ambient temperature are studied. The results show that the hard transformed β matrix (βt) in Ti-6Al-4V alloy bears most external loading force, while the external load deformation is mainly carried out by the soft primary α phase (αp). The strain and stress distribution in different regions within the same phase are also strongly asymmetrical. With the increase of the macro-strain, the strain ratio of αp to βt and the stress ratio of βt to αp are basically unchanged at first, then increase rapidly, and finally maintain stability. The volume fraction and grain size of αp have a significant effect on the strain and stress distribution in the constituent phases. With the increases of volume fraction or the decreases of grain size, the strain ratio and the stress ratio increases and decreases, respectively.

    参考文献
    相似文献
    引证文献
引用本文

陈国兴,刘才溢. Ti-6Al-4V钛合金组成相微观变形行为影响因素[J].稀有金属材料与工程,2020,49(11):3662~3668.[Chen Guoxing, Liu Caiyi. Influencing Factors of Micro Deformation Behavior of Constituent Phases in Ti-6Al-4V Titanium Alloy[J]. Rare Metal Materials and Engineering,2020,49(11):3662~3668.]
DOI:10.12442/j. issn.1002-185X.20190848

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2019-10-14
  • 最后修改日期:2019-11-14
  • 录用日期:2019-11-19
  • 在线发布日期: 2020-12-09
  • 出版日期: