+高级检索
燃料包壳用FeCrAl合金变形行为与热加工图研究
作者:
作者单位:

1 苏州热工研究院有限公司

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金项目(面上项目,重点项目,重大项目)


Hot Deformation Behavior and Processing Maps of FeCrAl Alloy for Nuclear Fuel Cladding
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文通过热模拟压缩试验研究了燃料包壳用FeCrAl合金在形变温度为800~1000 ℃、应变速率为0.001~1 s-1工艺条件下的热变形行为,采用Arrhenius双曲线正弦函数模型建立了FeCrAl高温变形本构方程,结合动态材料模型绘制了FeCrAl在应变量为0.05~0.8的热加工图。结果显示,FeCrAl流变应力随着变形温度的升高而降低、随着应变速率的升高而增大,变形温度与应变速率均会影响其组织演化。根据热加工图,FeCrAl流变失稳区随着应变量的增加先扩展后趋于稳定,其最佳热加工工艺参数确定为:1)应变量为0.1时,应变速率< 0.008 s-1、变形温度为880~1000 ℃;2)应变量≥ 0.3时,应变速率< 0.027 s-1、变形温度> 950 ℃。

    Abstract:

    Hot working of FeCrAl alloy for nuclear fuel cladding was investigated by thermal simulation compression experiment under deformation temperature of 800~1000 ℃ and strain rate of 0.001~1 s-1. The constitutive equation of the hot deformation behavior of FeCrAl alloy was established through Arrhenius hyperbolic sine function. Based on the dynamic material model, the processing map of FeCrAl alloy was derived for strain of 0.05~0.8. Results show that the flow stress of FeCrAl alloy decreases with the increase of deformation temperature and increases with the increase of strain rate. Both the deformation temperature and strain rate will affect the microstructure evolution. According to the processing map, the instability zone of flow behavior of FeCrAl alloy expands and then stabilizes with the increase of strain, and the optimal hot processing safety areas of the alloy are determined as follows: 1) the strain rate < 0.008 s-1 and the deformation temperature 880~1000 °C (when the strain is approximately 0.1); 2) the strain rate < 0.027 s-1 and the deformation temperature > 950 °C (when the strain is ≥ 0.3).

    参考文献
    相似文献
    引证文献
引用本文

柏广海,薛飞,张晏玮,刘二伟,尚灿,刘向兵,耿建桥,余伟炜.燃料包壳用FeCrAl合金变形行为与热加工图研究[J].稀有金属材料与工程,2020,49(7):2340~2345.[Bai Guanghai, Xue Fei, Zhang Yanwei, Liu Erwei, Shang Can, Liu Xiangbin, Geng Jianqiao, Yu Weiwei. Hot Deformation Behavior and Processing Maps of FeCrAl Alloy for Nuclear Fuel Cladding[J]. Rare Metal Materials and Engineering,2020,49(7):2340~2345.]
DOI:10.12442/j. issn.1002-185X.20190893

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2019-10-29
  • 最后修改日期:2019-12-09
  • 录用日期:2019-12-10
  • 在线发布日期: 2020-08-31
  • 出版日期: