+高级检索
热稳定处理时间对TNM合金糊状区组织的影响
作者:
作者单位:

1.哈尔滨工业大学金属精密热加工国家级重点实验室;2.黑龙江工程学院材料与化学工程学院

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划项目(2016YFB0301201);国家自然科学(51671073);云南省重大科技专项计划(2018ZE002);云南稀贵金属材料基因工程一期项目(2018ZE013)


Effect of Thermal Stabilization Time on Microstructure of Mushy Zone of TNM Alloy
Author:
Affiliation:

1.National Key Laboratory for Precision Hot Processing of Metals,Harbin Institute of Technology;2.Department of Material and Chemical Engineering,Heilongjiang Institute of Technology

Fund Project:

National Key Research and Development Program of China; National Natural Science Foundation of China; Major Special Science and Technology Project of Yunnan Province; Yunnan Rare Metal Materials Genetic Engineering Project

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用真空非自耗电弧炉制备了TNM(Ti-44Al-4Nb-1Mo-0.1B at.%)合金锭,研究其铸态组织形貌,并利用Bridgeman定向凝固装置对TNM合金进行热稳定处理实验,分析热稳定处理时间对合金定向凝固糊状区的影响。实验结果显示,其铸态组织是以(α2+γ)片层团为主体,网络状B2相、细小的γ相及硼化物分布于片层团间的近片层组织。热稳定处理时,热稳定时间越长、TNM合金固/液界面越平整,界面前沿温度场和溶质场趋向均匀,但从减少坩埚对熔体的污染的角度考虑,热稳定处理时间不宜过长,30~60 min的热稳定时间即可提供平整的定向凝固启动界面。 热稳定处理影响着TNM合金固/液界面附近固液两相中Al元素的分布,进而影响硼化物的分布。

    Abstract:

    In this paper, the ingots of TNM alloy(Ti-44Al-4Nb-1Mo-0.1B at.%) were obtained using a non-consumable electric arc melting furnace. As-cast microstructure of TNM alloy was investigated. Liquid metal cooling Bridgman-type apparatus was employed in the heat stabilization experiment of TNM alloy and the effect of thermal stabilization time on the mushy zone of TNM alloy during directional solidification has been investigated. The results show the as-cast microstructure of TNM alloy consists of a major of (α2+γ) lamellar colonies, network-like B2 phase, small γ phase and boride located at the interface of colonies. With the thermal stabilization time increasing, the solid/liquid interface will come to a planar one and the field of temperature and solute in the melt in front of solid/liquid interface will become more homogenous in thermal stabilization test. However, overmuch thermal stabilization time will make the melt contaminated by the crucible. The study shows the thermal stabilization time of 30~60 min is sufficient to provide a planar starting interface for directional solidification. Thermal stabilization affects the distribution of Al in solid and liquid phases near the solid/liquid interface of TNM alloy, and further affects the distribution of borides.

    参考文献
    相似文献
    引证文献
引用本文

李志平,骆良顺,孙雄凯,杨慧敏,刘桐,王亮,张东徽,苏彦庆,郭景杰,傅恒志.热稳定处理时间对TNM合金糊状区组织的影响[J].稀有金属材料与工程,2020,49(11):3938~3942.[Li Zhiping, Luo Liangshun, Sun Xiongkai, Yang Huimin, Liu Tong, Wang Liang, Zhang Donghui, Su Yanqing, Guo Jingjie, Fu Hengzhi. Effect of Thermal Stabilization Time on Microstructure of Mushy Zone of TNM Alloy[J]. Rare Metal Materials and Engineering,2020,49(11):3938~3942.]
DOI:10.12442/j. issn.1002-185X.20191007

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2019-11-29
  • 最后修改日期:2020-03-13
  • 录用日期:2020-03-19
  • 在线发布日期: 2020-12-09
  • 出版日期: