+高级检索
首页 > 过刊浏览>2021年第50卷第8期 >3003-3010. DOI:10.12442/j.issn.1002-185X.20200652
PDF HTML阅读 XML下载 导出引用 引用提醒
锆合金耐事故燃料包壳涂层研究进展
作者:
作者单位:

1.西安建筑科技大学冶金工程学院;2.西北有色金属研究院;3.中国核动力研究设计院

基金项目:

陕西省自然科学基金,2020JM-649,科技部国际合作项目,2014DFR50450


Research Progress in Zirconium Alloy for Accident Tolerant Fuel Cladding Coating
Author:
Affiliation:

1.School of Metallurgic Engineering,Xi′an University of Architecture and Technology,Xi′an,;2.Northwest Institute for Nonferrous Metal Research,Xi′an;3.Nuclear Power Institute of China,Chengdu

  • 摘要
    • | |
  • 访问统计
    • |
  • 参考文献 [53]
    • |
  • 相似文献 [20]
    • | | |
  • 文章评论
    摘要:

    日本福岛核事故后，以提升反应堆在事故工况下的稳定性和安全性为目的的事故容错燃料技术研究已成为世界范围内的研究热点。涂层技术是事故容错燃料项目短期规划主要的发展方向。在锆合金燃料包壳表面制备保护性涂层能够在不改变现有燃料体系结构的前提下，提升锆合金包壳在反应堆失水事故条件下的事故容错能力。本文综述了国内外锆合金包壳涂层领域研究成果，总结了锆合金表面涂层的种类、性能、制备技术及应用前景，结合涂层的制备技术，综合分析了各种制备方法的特点以及未来需集中要解决的问题。在此基础上，提出金属Cr涂层具有良好的耐腐蚀性能，尤其是在>1200°C高温蒸汽腐蚀条件下能够有效保护锆合金基体，是目前最有希望工程化应用的事故容错涂层。同时，探索适合于工程化应用的Cr涂层制备技术，解决Cr涂层的制备缺陷，提升涂层的结构致密性以及界面性能是目前亟待解决的关键问题。

    Abstract:

    After the Fukushima nuclear accident in Japan, the world-wide research is focused on the accident tolerant fuel (ATF) program, aimed to enhance the stability and safety of nuclear reactor under normal or off-normal conditions. In the short-term-plan of ATF program, coating technology is considered as a revolutionary approach. Synthesizing a protective coating on the surface of Zr based cladding would improve oxidation resistance obviously with minimal effect on structure of the existing fuel system and properties of the existing nuclear Zr based materials. In this study, a review of coating development status based on Zr alloy is offered, including the coating types, properties and application prospects，also the characteristics of synthesization technology. Based on these analyses, it’s believed that Cr coating could be considered as the best candidate ATF material for industrial application at present, due to its good corrosion resistance at high temperature steam, especially higher than 1200℃. At the same time, it is a key problem to explore a Cr coating synthesization technology suitable for engineering application, with none structure defects, more density and higher interface performance.

    参考文献
    [1]Han Xiaochun, Wang Yu, Peng Shuming . Corrosion Science[J], 2019, 149:45-53
    [2]Bischoff J, Delafoy C, Vauglin C . Nuclear Engineering and Technology[J], 2018, 50(2):223-228
    [3]Hirano M, Yonomoto T, Ishigaki M . Journal of Nuclear Science andTechnology[J], 2012, 49(1):1-17
    [4]Sawarn T K, Banerjee S, Samanta A . Journal of Nuclear Materials[J]2015, 467:820-831
    [5]Bragg-sitton S. Nuclear News[J], 2014, 53:83–91
    [6]Ma Xianfeng, Wu Yawen, Tan Jie et al. Surface and Coatings Technology[J], 2019,358:521-530
    [7]Zinkle S J, Terrani K A, Gehin J C et al. Journal of Nuclear Materials[J], 2014, 448(1-3):374-379
    [8]Hallstadius L, Johnson S, Lahoda E. Progress in Nuclear Energy[J], 2012, 57:71-76
    [9]Yeom H, Lockhart C, Mariani R et al. Journal of Nuclear Materials[J], 2018, 499:256-267
    [10]Koo Y H, Yang J H, Park J Y et al. Nuclear Technology[J], 2014, 186:295-304
    [11]Park D J, Kim H G, Jung Y I et al. Journal of Nuclear Materials[J], 2016, 482:75-82
    [12]Nelson A T, Sooby E S, Kim Y J et al. Journal of Nuclear Materials [J], 2014, 448(1-3):441-447
    [13]TERRANI K A, ZINKLE S J, SNEAD L L. Journal of Nuclear Materials[J], 2014, 448:420–435.
    [14]Kim H G, Yang J H, Kim W J et al. Nuclear Engineering and Technology[J], 2016, 48(1):1-15
    [15]Chen Q S, LIU C H, ZHANG R Q et al. Corrosion Science[J], 2020,165(C).
    [16]Park J H, Kim H G, Park J Y et al. Surface and Coatings Technology[J], 2015, 280:256-259
    [17]KIM H G, KIM I H, PARK J Y et al Zirconium in the nuclear industry:17th International symposium [C], STP 1543, 2014:346-369.
    [18]PARK D J, KIM H G, PARK J Y et al. Fusion Engineering and Design[J], 2016,111:561-564
    [19]Yeom H, Maier B, Johnson G et al. Journal of Nuclear Materials[J], 2018, 507:306-315
    [20]CARR J, VASUDEVAMURTHY G, SNEAD L et al. Journal of Materials Engineering and Performance[J], 2016, 25(6):2347-2355
    [21]Han Xiaochun, Xue Jiaxiang, Peng Shuming et al. Corrosion Science[J], 2019, 156:117-124
    [22]Eklund P, Beckers M, Jansson U et al. Thin Solid Films[J], 2010, 518(8):1851-1878
    [23]Roberts D A. Master’s thesis(硕士论文) [D]. Knoxville:University of Tennessee, 2016
    [24]Yeom H, Hauch B, Cao G et al. Thin Solid Films[J], 2016, 615:202-209
    [25]Tang C C, Steinbrueck M, Stueber M et al. Corrosion Science[J], 2018, 135:87-98
    [26]Usui T, Sawada A, Amaya M et al. Journal of Nuclear Science and Technology[J], 2015, 52(10):1-5
    [27]Alat E, Motta A T, Comstock R J et al. Journal of Nuclear Materials[J], 2016, 478:236–244
    [28]Khatkhatay F, Jiao L, Jian J et al. Journal of Nuclear Materials[J], 2014, 451:346–351
    [29]Bo Guanghai(柏广海), Chen Zhilin(陈志林), Zhang Yanwei(张晏玮) et al. Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2017, 046(7):2035-2040
    [30]Kuprin, А S, Belous, V А, Voyevodin V N et al. Journal of Nuclear Materials[J], 2015, 465:400-406
    [31]Yang Zhao, Niu Yaran, Xue Jiaxiang et al. materials and corrosion[J], 2019, 70(1):37-47
    [32]Zeng Bo(曾波), FanHongyuan(范洪远), Chang Hong(常鸿) et al. Surface Technology(表面技术)[J], 2019(11):106-112
    [33]Xiao Weiei, Deng Hua, ZOU Shuliang et al. Journal of Nuclear Materials[J], 2018, 509:542-549
    [34]Wilhelmsson O, Palmquist J P, Lewin E et al Journal of Crystal Growth[J], 2006, 291(1):290-300
    [35]G?tsch T, Neumann b, Kl?tzer B et al Surface Science[J], 2019, 680:52-60
    [36]Lee G C, Noh H, Yeom H et al. Annals of Nuclear Energy[J], 2019, 126:350-358
    [37]Huang He(黄鹤), Qiu Changjun(邱长军), Chen Yong(陈勇) et al. China Surface Engineering(中国表面工程)[J], 2018, 32(2):52-58
    [38]Yeom H, Maier B, Mariani R et al Surface and Coatings Technology[J], 2017, 316:30-38
    [39]Bleykher G A, Sidelev D V, Grudinin V A et al. Surface and Coatings Technology[J], 2018, 354:161-168
    [40]Terrani k A, Parish c M, Shin D et al Journal of Nuclear Materials[J], 2013, 438(1-3):64-71
    [41]He Xiujie, Tian Zhonghe, Shi Bohao et al Annals of Nuclear Energy[J], 2019, 132:243-248
    [42]He Xiujie, Zhan Hanyu,Lin Jian et al Ceramics International[J], 2020, 46:11357–11363
    [43]Hu Xiaogang, Dong Chuang, Wang Qing et al Journal of Nuclear Materials[J], 2019, 519:145-156
    [44]Yan Yanqin(严艳芹), Qiu Changjun(邱长军), Huang He(黄鹤) et al. Surface Technology(表面技术)[J], 2017, 46(12):78-83
    [45]Grujicic M, Zhao C L, Derosset W S et al Materials and Design[J], 2004, 25(8):681-688
    [46]Assadi H,G?rtner F, Stoltenhoff T et al ActaMaterialia[J], 2003, 51(15):4379-4394
    [47]SchmidT T, Gaertner F, Kreye H. Journal of Thermal Spray Technology[J], 15(4):488-494
    [48]Stoltenhoff T, Borchers C, Grtner F et al. Surface and Coatings Technology[J], 2006, 200(16-17):4947-4960
    [49]Liu Minzhi(柳敏志), Li Xiangbo(李相波), Cheng Xudong(程旭东). 热加工工艺[J], 41(20):175-177
    [50]Dykhuizen R C, Smith M F. Journal of Thermal Spray Technology[J], 1998, 7(2):205-212
    [51]?eve?ek M, GurgenA ,Seshadri A et al Nuclear Engineering and Technology[J], 2018, 50(2):229-236
    [52]Chen Kepei(陈科培), Chen Zhiyong(陈志勇), Liu Dan(刘丹) et al.应用激光[J], 2015, 35(2):166-169
    [53]Kim H G, Kim I H, Jung Y I et al. Journal of Nuclear Materials[J], 2015, 465:531-539
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

刘家欢,李争显,王彦峰,耿娟娟,岳慧芳,高士鑫.锆合金耐事故燃料包壳涂层研究进展[J].稀有金属材料与工程,2021,50(8):3003~3010.[LIU Jia-huan, Li-Zheng-xian, WANG Yan-feng, GENG Juan-juan, YUE Hui-fang, GAO Shi-xin. Research Progress in Zirconium Alloy for Accident Tolerant Fuel Cladding Coating[J]. Rare Metal Materials and Engineering,2021,50(8):3003~3010.]
DOI：10.12442/j. issn.1002-185X.20200652

复制
文章指标
  • 点击次数:1007
  • 下载次数: 1482
  • HTML阅读次数: 174
  • 引用次数: 0
历史
  • 收稿日期:2020-08-31
  • 最后修改日期:2020-10-12
  • 录用日期:2020-10-21
  • 在线发布日期: 2021-09-07
  • 出版日期: 2021-08-31

总访问量 36088787

地址：西安市未央区未央路96号 邮政编码：710016 联系电话：029－86231117

E-mail：rmme@c-nin.com; rmme0626@aliyun.com

版权所有:稀有金属材料与工程 ® 2025 版权所有 技术支持:北京勤云科技发展有限公司 ICP:陕ICP备05006818号-3