+高级检索
TB17钛合金在等温时效过程中的相析出行为
作者:
作者单位:

1.南昌航空大学 材料科学与工程学院,江西 南昌 330063;2.南昌航空大学 江西省航空材料表面技术工程研究中心,江西 南昌 330063;3.中国航发北京航空材料研究院 先进钛合金航空科技重点实验室,北京 100095

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金项目


Phase Precipitation Behavior of TB17 Titanium Alloy During Isothermal Aging Process
Author:
Affiliation:

1.School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063, China;2.Jiangxi Provincial Engineering Research Center for Surface Technology of Aeronautical Materials, Nanchang Hangkong University, Nanchang 330063, China;3.Aviation Key Laboratory of Science and Technology on Advanced Titanium Alloys, AECC Beijing Institute of Aeronautical Materials, Beijing 100095, China

Fund Project:

National Natural Science Foundation of China (51764041)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用X射线衍射、扫描电子显微镜、透射电子显微镜和硬度测试分析了新型超高强韧钛合金TB17在等温时效过程中析出相的演变及时效响应。结果表明:该合金在350 ℃时主要发生β→β+ω相变,ω相为细小的颗粒。在450 ℃下进行时效处理时,α相通过ω相辅助形核的方式形核长大。在550和650 ℃时主要发生β→β+α相变,α相为片层状。在该温度范围内长时间进行时效处理的TB17合金存在2种类型α相,满足Burgers关系的1α相和不满足Burgers关系的2α相。其中2α相为孪晶α相,在1α相内部{102}孪晶面形核,并不断消耗1α相而长大。TB17钛合金的时效特征与其他β型钛合金相似。TB17钛合金的时效响应快,显微硬度随着时效温度升高呈现出先增加后降低的趋势,在450 ℃时效处理下硬度达到最大。

    Abstract:

    The precipitation phase evolution and the aging response of TB17 titanium alloy, a new titanium alloy with ultra-high strength and toughness, were studied by X-ray diffraction, scanning electron microscope, transmission electron microscope, and Vickers hardness tests during isothermal aging process. The results show that ββ+ω phase transformation mainly happens at 350 °C, and the precipitated phase ω is the shape of fine granular. After aging treatment at 450 °C, the α phase is nucleated through the assistance nucleation of ω phase. The phase transformation of ββ+α occurs at 550 and 650 °C and the α phase exhibits lamellar structure. However, there are two types of α phase precipitated after aging at 550 and 650 °C for long time: the Burgers α (Type 1α) phase which satisfies the Burgers orientation relationship and the Type 2α phase which does not satisfy the Burgers orientation relationship. The Type 2α phase is a twin crystal phase nucleated on the {102} twin plane inside the Burgers α phase. The aging characteristic of TB17 titanium alloy is similar to that of most β type titanium alloys. The aging response of TB17 titanium alloy is fast. The Vickers hardness of TB17 titanium alloy is increased firstly, reaching the maximum value at 450 °C, and then decreased with increasing the aging temperatures.

    参考文献
    相似文献
    引证文献
引用本文

罗军明,朱鸿昌,朱知寿,徐吉林,李明兵.TB17钛合金在等温时效过程中的相析出行为[J].稀有金属材料与工程,2021,50(11):3862~3870.[Luo Junming, Zhu Hongchang, Zhu Zhishou, Xu Jilin, Li Mingbing. Phase Precipitation Behavior of TB17 Titanium Alloy During Isothermal Aging Process[J]. Rare Metal Materials and Engineering,2021,50(11):3862~3870.]
DOI:10.12442/j. issn.1002-185X.20200680

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2020-09-08
  • 最后修改日期:2020-11-02
  • 录用日期:2020-11-23
  • 在线发布日期: 2021-11-25
  • 出版日期: 2021-11-24