+高级检索
空气反应钎焊ZrO2与GH3536接头组织与力学性能
作者:
作者单位:

1.天津大学 天津市现代连接重点实验室;2.合肥工业大学 材料科学与工程学院

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助(项目号:51875400)


Interfacial Microstructure and Properties of ZrO2 Ceramic and GH3536 Alloy Reactive Air Brazed Joints
Author:
Affiliation:

1.Tianjin Key Lab of Advanced Joining Technology,Tianjin University;2.School of Materials Science and Engineering,Hefei University of Technology

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用Al2TiO5颗粒增强的Ag-CuO-Al2TiO5复合钎料,在钎焊温度为1050 ℃保温30 min工艺参数下,对ZrO2陶瓷与GH3536合金进行了空气反应钎焊(RAB),分析了钎焊接头的界面结构及其形成机制;同时研究了接头在800 ℃氧化不同时间的组织演变规律及其对连接性能的影响。结果表明,钎焊过程中Al2TiO5颗粒分解产生Al2O3和TiO2,TiO2与ZrO2陶瓷反应生成ZrTiO4相。GH3536侧金属元素发生氧化形成尖晶石层,并分别与钎缝中的Al2O3、CuO反应,在钎缝中生成细密分布的NiAl2O4相及紧邻尖晶石层的团块状NiCuO2相。ZrO2/GH3536接头高温氧化1000 h后,钎缝中NiAl2O4呈团块状分布,Cr2O3薄层保持稳定;尖晶石层内部元素均匀化,厚度有明显增加。接头强度随着氧化时间的延长先降低后稳定在20 MPa。

    Abstract:

    ZrO2 ceramic and GH3536 alloy were successfully reactive air brazed (RAB) at 1050℃ for 30min with Ag-CuO-Al2TiO5 composite filler. The interface structure and formation mechanism of the brazing joint were analyzed. Meanwhile, the influence of the exposure test at 800 ℃ on the microstructure and properties of joints were systematically analyzed. The results showed that Al2TiO5 particles were decomposed into Al2O3 and TiO2 particles, and TiO2 reacted with ZrO2 ceramic to form the ZrTiO4 phase. The oxidation reaction occurred on the metal elements from GH3536, which reacted with Al2O3 and CuO in the brazing seam respectively to generate NiAl2O4 phase with fine distribution in the brazing seam and massive NiCuO2 phase adjacent to the spinel layer. After the ZrO2/GH3536 joint was oxidized above 1000 h at 800 ℃, NiAl2O4 in the brazing joint was distributed in blocks and while the thin layer of Cr2O3 remained stable. The elements inside the spinel layer were homogenized, the thickness of which increased significantly. The strength of the joint first decreased and then stabilized at 20 MPa with the extension of oxidation time.

    参考文献
    相似文献
    引证文献
引用本文

杨钧皓,杨振文,王颖,宋奎晶,王东坡.空气反应钎焊ZrO2与GH3536接头组织与力学性能[J].稀有金属材料与工程,2021,50(12):4450~4456.[Yang Junhao, Yang zhenwen, Wang Ying, Song Kuijing, Wang dongpo. Interfacial Microstructure and Properties of ZrO2 Ceramic and GH3536 Alloy Reactive Air Brazed Joints[J]. Rare Metal Materials and Engineering,2021,50(12):4450~4456.]
DOI:10.12442/j. issn.1002-185X.20201008

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2020-12-30
  • 最后修改日期:2021-01-11
  • 录用日期:2021-02-03
  • 在线发布日期: 2022-01-09
  • 出版日期: 2021-12-24