+高级检索
首页 > 过刊浏览>2023年第52卷第11期 >3881-3892. DOI:10.12442/j.issn.1002-185X.20220858
PDF HTML阅读 XML下载 导出引用 引用提醒
环境氧含量对激光定向能量沉积TC4合金组织及性能的影响
作者:
作者单位:

1.南昌航空大学 轻合金加工科学与技术国防重点学科实验室;2.1南昌航空大学 轻合金加工科学与技术国防重点学科实验室

基金项目:

国家自然科学基金资助（项目号51865036, 52265053），江西省自然科学基金（项目号20192ACBL21050, 20202BABL204039）


Effects of Atomtmosphere Oxygen Content on Microstructure and Mechanical Properties of TC4 Titanium Alloy Prepared by Laser Directed Energy Deposition
Author:
Affiliation:

National Defence Key Discipline Laboratory of Light Alloy Processing Science and Technology,Nanchang Hangkong University

Fund Project:

国家自然科学基金资助（项目号51865036, 52265053），江西省自然科学基金（项目号20192ACBL21050, 20202BABL204039）

  • 摘要
    • | |
  • 访问统计
    • |
  • 参考文献 [34]
    • |
  • 相似文献 [20]
    • | | |
  • 文章评论
    摘要:

    研究了环境气氛氧含量对激光定向能量沉积TC4钛合金组织及力学性能的影响，通过OM、SEM和TEM及硬度实验、拉伸实验对成形试样的显微组织、力学性能和断口进行分析。结果表明：当成形气氛氧含量从50ppm、500ppm、2000ppm到5000 ppm逐渐提高，试样表面氧化程度增加，TC4钛合金试样表面颜色由由银白色逐渐过渡到黄色、蓝色和深灰色，XRD衍射图谱结果表明，试块表面氧化物种类增多，氧化层的厚度也逐渐增加；试样显微组织逐渐由网篮状组织转变为针状马氏体α′组织，板条粗化，长宽比减小；TC4钛合金试样的硬度和室温抗拉强度随成形气氛氧含量的增加逐渐提高，受金属晶格畸变及冷却速度的影响，沉积态成形试样的抗拉强度由920 MPa增加到982 MPa，延伸率由12.4%减小到10.9%。

    Abstract:

    TC4 titanium alloy specimens were prepared by laser directed energy depositon in different oxygen contents of inert atmosphere. The effects of oxygen content in the argon shielding gas on microstructure, fracture surface and mechanical properties of TC4 titanium alloy by laser directed energy depositon have been investigated by optical microstructure (OM), scanning electron microscopy (SEM) , transmission electron microscope (TEM), microhardness testing and tensile testing. The results show that the oxidation degree of the samples surface increase, and the surface color of TC4 titanium alloy samples gradually change from silver white to yellow, blue and dark gray with the increasing of the oxygen content of the atmosphere. From XRD analysis, the types of oxides on the sample surface increase, and the thickness of the oxide layers also increase gradually. The microstructure of the specimens gradually change from basket structure to acicular martensite α" structure, the laths are coarsened and the aspect ratios are reduced. The hardness and tensile strength at room temperature of TC4 titanium alloy samples increase gradually with the increase of oxygen content in the forming atmosphere. Due to the influence of metal lattice distortion and cooling rate, the tensile strength of the deposition samples increase from 920 MPa to 982 MPa and the elongation decreased from 12.4% to 10.9%.

    参考文献
    [1] Msaawad E, Sano Y,Wagner L, et al. Materials Science and Engineering: A[J], 2012, 536: 82-91.
    [2] Hou Jijun(侯继军), Dong Junhui(董俊慧), Xu Aiping(许爱平). Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2021, 50(12): 4236-4244.
    [3] Zhao yongqing(赵永庆), Chen Yongnan(陈永楠), Zhang Xuemin(张学敏), et al. Phase transformation and heat treatment of titanium alloys(钛合金相变及热处理)[M]. Changsha:Central South University Press, 2012.
    [4] Li Jing(李静), Lin Xin(林鑫), Qian Yuanhong(钱远宏), et al. Chinese Journal of Lasers(中国激光)[J], 2014, 41(011): 103-107.
    [5] Bhushan B, Caspers M. Microsystem Technologies[J], 2017, 23(4): 1117-1124
    [6] Zhao Z, Chen J, Lu X,et al. Materials Science and Engineering: A[J], 2017, 691:16-24.
    [7] Wang F, Mei J, Wu X. Applied surface science[J], 2006, 253(3): 1424–30.
    [8] Gong X, Anderson T, Chou K. ASME/ISCIE 2012 International Symposium on Flexible Automation[C]. American Society of Mechanical Engineers Digital Collection, 2012.
    [9] Martina F, Mehnen J, Williams S W, et al.Joural of Materials Processing Technology[J], 2012, 212(6): 1377–86.
    [10] Clark D, Whittaker M T, Bache M R. Metallurgical and Materials Transactions B[J], 2012, 43B(2): 388–96.
    [11] Al-Bermani S S, Blackmore M L, Zhang W, et al. Metallurgical and Materials Transactions A [J] ,2010, 41A(13): 3422–34.
    [12] Liu Xin(刘昕), Zhao Xiujuan(赵秀娟), Geng Shuili(巩水利), et al.The Chinese Journal of Nonferrous Metals(中国有色金属学报)[J], 2010, 20(S1): 178-182.
    [13] Conrad H. Progress in Materials Science[J], 1981, 26(2-4): 123-403.
    [14] Chen Jing(陈静), Yang Haiou(杨海欧), Tang Huiping(汤慧萍), et al. Materials China (中国材料进展)[J], 2004, (03): 23-26.
    [15] Zhang Jinchao(张津超), Shi Tuo(石拓), Li Gang(李刚), et al. Surface Technology(表面技术)[J], 2020, 49(02): 243-251.
    [16] Liu Zhicheng(刘志成), Zhang Lijun(张利军), Zhang Chenhui(张晨辉). World Nonferrous Metals(世界有色金属)[J], 2016(16): 151-153.
    [17] Yang Guang(杨光), Feng Zhiguo(冯志国), Qin Lanyun(钦兰云), et al. Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2017, 46(06): 1650-1655.
    [18] Fan Limin(樊立民), Zheng Zhendan(郑震旦), Xue Manye(薛漫野), et al. Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2022,51(09): 3345-3352.
    [19] Zhang Y K(张云琨). Thesis for Doctorate(博士论文)[D]. Changchun: Changchun Institute of Optics, Fine Mechanics and Physics, 2000.
    [20] Maria V D, Barbara D C, Mariapia P. Color Research and Application[J], 2008, 33(3): 221.
    [21] Yuan Shuo(袁烁), Lin Naiming(林乃明), Zou Jiaojuan(邹娇娟), et al.Surface Technology(表面技术)[J], 2017, 46(10): 185-193.
    [22] Peng Wenwen(彭雯雯), Zeng Weidong(曾卫东), Zhang Yaowu(张尧武), et al. Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2013, 42(2): 358-361.
    [23] Mertens T, Kollek H. International Journal of Adhesion and Adhesives[J], 2010,30(6): 466-477.
    [24] Hoye N, Li H,Norrish J, et al. The 12th World Conference on Titanium[C], 2011,1:1-4.
    [25] Waldner P, Eriksson G. Calphad-computer Coupling of Phase Diagrams&Thermochemistry[J], 1999, 23(2): 189-218.
    [26] Qian Yuanhong(钱远宏), Tan Hua(谭华), Li Jing(李静), et al. Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2014, 43(09): 2162-2166.
    [27] Qin Lanyun(钦兰云), Jin Zixin(金子心), Zhao Shuo(赵朔), et al. Chinese Journal of Lasers(中国激光)[J], 2020,47(01): 122- 128.
    [28] Beladi H, Chao Q, Rohrer G S. Acta Materialia[J], 2014, 80: 478- 489.
    [29] Dong Lina(董丽娜), Zhang Jianxun(张建勋). Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2013, 42(03): 655-660.
    [30] Zhang Xiangwei(张伟祥). Thesis for Master(硕士论文) [D]. Guangzhou: Guangdong University of Technology, 2019.
    [31] Bo Wende(卜文德), Liu Rongguang(刘容光), Song Fengtao(宋锋涛), et al. Transactions of the China Welding Institution(焊接学报)[J], 2017, 38(09): 102-106 133.
    [32] Liu Hongyu(刘宏宇), Zhao Jun(赵军), Xie Huasheng(谢华生), et al. Foundry(铸造)[J], 2012, 61(09): 1006-1008 1014.
    [33]Wang Shiqing(王世清), Jiao Yingxiang(焦迎香). Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2022, 51(07): 2716-2720.
    [34] Li Yaning(李亚宁), Li Jianing(李嘉宁). Laser welding/Cutting/ Cladding technology(激光焊接/切割/熔覆技术)[M]. Beijing: Chemical Industry Press, 2012, 250-252.
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

高健,刘奋成,刘丰刚,尤启凡,魏昱涵,程诗翔.环境氧含量对激光定向能量沉积TC4合金组织及性能的影响[J].稀有金属材料与工程,2023,52(11):3881~3892.[Gao Jian, Liu Fencheng, Liu Fenggang, You Qifan, Wei Yuhan, Cheng Shixiang. Effects of Atomtmosphere Oxygen Content on Microstructure and Mechanical Properties of TC4 Titanium Alloy Prepared by Laser Directed Energy Deposition[J]. Rare Metal Materials and Engineering,2023,52(11):3881~3892.]
DOI：10.12442/j. issn.1002-185X.20220858

复制
文章指标
  • 点击次数:267
  • 下载次数: 951
  • HTML阅读次数: 0
  • 引用次数: 0
历史
  • 收稿日期:2022-11-01
  • 最后修改日期:2022-12-03
  • 录用日期:2022-12-06
  • 在线发布日期: 2023-11-27
  • 出版日期: 2023-11-22

总访问量 36081572

地址：西安市未央区未央路96号 邮政编码：710016 联系电话：029－86231117

E-mail：rmme@c-nin.com; rmme0626@aliyun.com

版权所有:稀有金属材料与工程 ® 2025 版权所有 技术支持:北京勤云科技发展有限公司 ICP:陕ICP备05006818号-3