+高级检索
铸态Mg-3Sn-1Mn-1La镁合金组织演变及本构方程建立
作者:
作者单位:

Taiyuan University of Science and Technology

作者简介:

通讯作者:

中图分类号:

基金项目:

the Natural Science Foundation of Shanxi Province (No.: 201901D111241), Key Research and Development Program of Shanxi Province (No.: 201603D111004, 201703D111003) and Major Science and Technology Projects of Shanxi Province (No.: 20181101002) and National Natural Science Foundation of China (No.: U1610253, U610256, 51604181)


Libin Zhang1, 3, Guangming Liu1, 3*, Tingzhuang Han1, 3, Wenzhan Huang1, Rongjun Wang2, 3, Lifeng Ma2, 3
Author:
Affiliation:

1.School of Mechanical Engineering,Taiyuan University of Science and Technology;2.China;3.Coordinative Innovation Centre of Taiyuan Heavy Machinery Equipment,Taiyuan University of Science and Technology

Fund Project:

the Natural Science Foundation of Shanxi Province (No.: 201901D111241), Key Research and Development Program of Shanxi Province (No.: 201603D111004, 201703D111003) and Major Science and Technology Projects of Shanxi Province (No.: 20181101002) and National Natural Science Foundation of China (No.: U1610253, U610256, 51604181)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过对Mg-3Sn-1Mn-1La合金在200-450℃温度和0.001-1.0s-1应变速率范围内进行等温压缩,研究了铸态的Mg-3Sn-1Mn-1La合金的热变形行为和组织演变。流变应力随着变形温度的降低和应变率的增加而明显增加。再结晶晶粒尺寸随温度升高和应变速率降低而增加。在较低的变形温度下,连续动态再结晶是DRX的主要机理。随着变形温度的增加,不连续的动态再结晶成为主要再结晶机制。分析并校正了摩擦变形加热对流动应力的影响。结果表明,在较高的应变速率和较低的变形温度下,形变热对流动应力有显著的影响,而摩擦作用较小。根据实验结果,建立了应变补偿的Arrhenius型方程。将实验数据与计算出的流动应力进行对比,结果表明建立的本构方程可以充分描述实验合金的热变形行为。

    Abstract:

    Hot deformation behavior and microstructural evolution of the as-cast Mg-3Sn-1Mn-1La alloy were investigated by isothermal compression at temperature of 200-450℃ and strain rate of 0.001-1.0s-1. The flow stress increases obviously with decreasing temperature and increasing strain rate. The recrystallized grain size increases with increasing temperature and decreasing strain rate. At lower deformation temperatures, continuous dynamic recrystallization is the main mechanism of DRX. However, discontinuous dynamic recrystallization becomes the predominant operating mechanism of DRX at high deformation temperature. The effects of friction and deformation heating on flow stress were analyzed and corrected. The results show that deformation heating has a significant influence on the flow stress at higher strain rates and lower temperatures, while the frictional effect is slight. Based on the experimental results, a strain-compensated Arrhenius-type equation was developed. Comparison of the experimental data with the calculated flow stress indicates that the developed constitutive equations can adequately describe the hot deformation behavior of the experimental alloy.

    参考文献
    相似文献
    引证文献
引用本文

张利斌,刘光明,韩廷状,黄闻战,王荣军,马立峰.铸态Mg-3Sn-1Mn-1La镁合金组织演变及本构方程建立[J].稀有金属材料与工程,2021,50(3):835~847.[Zhang Libin, Liu Guangming, Han Tingzhuang, Huang Wenzhan, Wang Rongjun, Ma Lifeng. Libin Zhang1, 3, Guangming Liu1, 3*, Tingzhuang Han1, 3, Wenzhan Huang1, Rongjun Wang2, 3, Lifeng Ma2, 3[J]. Rare Metal Materials and Engineering,2021,50(3):835~847.]
DOI:10.12442/j. issn.1002-185X. E20200011

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2020-03-22
  • 最后修改日期:2020-05-22
  • 录用日期:2020-06-09
  • 在线发布日期: 2021-04-02
  • 出版日期: