+高级检索
表面活性剂对微波水热合成磷化钴的影响
DOI:
作者:
作者单位:

武汉科技大学

作者简介:

通讯作者:

中图分类号:

基金项目:


Effects of surfactants on the Co2P nanostructures via microwave hydrothermal method
Author:
Affiliation:

Wuhan university of science and technology

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以氯化钴和黄磷为主要原料,以十六烷基三甲基溴化铵(CTAB)为结构导向剂,采用微波水热法制备了一维磷化钴(Co2P)纳米线。研究了表面活性剂及其加入量对合成Co2P晶相和形貌的影响,及其电化学性能。利用X-射线衍射仪(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)对产物的物相和显微结构进行表征。结果表明:引入表面活性剂均可以使试样中生成一维Co2P纳米结构,添加CTAB的试样中生成了大量的Co2P纳米线,其直径约为50~200 nm,产率和长径比均随着CTAB加入量的增加而增加。电化学性能结果表明,Co2P纳米线具有赝电容特性,循环稳定性较好,1000次循环后比电容保持率为68%。

    Abstract:

    One-dimensional Co2P nanowires were synthesized by microwave hydrothermal (MWH) method using CoCl2·6H2O and yellow phosphorus as raw materials, and CTAB surfactant as a structure-directed agent. The effect of surfactants on the Co2P nanostructures was studied. As-synthesized nanowires were characterized by XRD, SEM, and TEM. The results showed that One-dimensional Co2P nanostructures were synthesized with the presence of surfactants, and a number of Co2P nanowires with 50-200 nm in diameter were obtained using CTAB. The yield and length of Co2P nanowires were increased with CTAB contents increase. The electrochemical properties indicated that Co2P nanowires had typical pseudo-capacitive characteristics and remained capacitance retention of 68 % after 1000 cycles.

    参考文献
    相似文献
    引证文献
引用本文

梁峰.表面活性剂对微波水热合成磷化钴的影响[J].稀有金属材料与工程,2018,47(S1):269~272.[liangfeng. Effects of surfactants on the Co2P nanostructures via microwave hydrothermal method[J]. Rare Metal Materials and Engineering,2018,47(S1):269~272.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-06-27
  • 最后修改日期:2018-02-09
  • 录用日期:2018-02-09
  • 在线发布日期: 2018-10-22
  • 出版日期: