+高级检索
放电等离子技术连接铬酸镧陶瓷
作者:
作者单位:

1.内蒙古工业大学化工学院;2.内蒙古自治区薄膜与涂层重点实验室;3.内蒙古工业大学材料学院

作者简介:

通讯作者:

中图分类号:

基金项目:

内蒙古自然科学基金资助(2017MS0503)和国家自然科学基金资助(51865044)


Joining of Lanthanum Chromate Ceramics by Spark Plasma technology
Author:
Affiliation:

1.School of Chemical Engineering,Inner Mongolia University of Technology,Inner Mongolia Hohhot School of Materials Science and Engineering,Inner Mongolia University of Technology,Inner Mongolia Hohhot;2.Inner Mongolia Key Laboratory of Thin Film and Coatings Technology,Inner Mongolia Hohhot;3.School of Materials Science and Engineering, Inner Mongolia University of Technology

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    铬酸镧陶瓷拉伸性能差,脆性高、难以变形、硬度高使得加工上存在难度,陶瓷连接技术可以实现低成本制造形状复杂的大型陶瓷构件。本文采用铬酸镧前驱体料浆作为中间层材料,利用放电等离子技术进行了铬酸镧陶瓷的连接,测定了连接件的连接强度,并借助SEM、EDS等手段分析了连接温度及保温时间对连接件强度的影响。

    Abstract:

    Lanthanum chromate ceramics with poor tensile properties, high brittleness, difficult deformation and high hardness is difficult to process. Large ceramic components with complex shapes can be fabricated at low cost by ceramic joining technology. In this paper, the lanthanum chromate precursor slurry was used as the interlayer material, and the lanthanum chromate ceramic was joined by spark plasma technology. And then the bonding strength of the joining was measured. The influence of joining temperature and holding time on the strength of the joint was analyzed by means of SEM, EDS and so on.

    参考文献
    相似文献
    引证文献
引用本文

董红英,陈晓东,贾朋伟,李建国.,朱力伟,马文.放电等离子技术连接铬酸镧陶瓷[J].稀有金属材料与工程,2020,49(2):634~638.[Dong Hongying, Chen Xiaodong, Jia Pengwei, Li Jianguo.,Zhu Liwei, Ma Wen. Joining of Lanthanum Chromate Ceramics by Spark Plasma technology[J]. Rare Metal Materials and Engineering,2020,49(2):634~638.]
DOI:10.12442/j. issn.1002-185X. QH20190047

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2019-04-01
  • 最后修改日期:2019-05-06
  • 录用日期:2019-10-23
  • 在线发布日期: 2020-03-12
  • 出版日期: