+高级检索
热处理工艺对TC8M-1钛合金组织和性能的影响
作者单位:

宝钛集团有限公司,宝鸡钛业股份有限公司,宝鸡钛业股份有限公司,宝钛集团有限公司,宝钛集团有限公司,宝钛集团有限公司,宝钛集团有限公司

基金项目:

国家自然科学基金资助项目(59493300);教育部博士点基金资助项目(9800462)


Effect of heat treatment process on microstructure and properties ofTC8M-1 titanium alloy
Affiliation:

Baoti Group Ltd,Baoji Titanium Industry Co,Ltd,Baoji Titanium Industry Co,Ltd,Baoti Group Ltd,Baoti Group Ltd,Baoti Group Ltd,Baoti Group Ltd

  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献 [17]
  • |
  • 相似文献 [20]
  • | | |
  • 文章评论
    摘要:

    TC8M-1钛合金是新近研制的最高使用温度达450 °C的热强型、长寿命高温钛合金。通过对该合金进行不同温度的固溶和时效处理,研究热处理工艺对合金显微组织和力学性能的影响。结果表明:随着固溶温度的升高,合金中等轴初生α相含量逐渐减少,β转变组织进一步粗化,合金由等轴组织转变为双态组织,合金的室温强度呈下降趋势;随着时效温度的升高,合金中等轴初生α相含量无变化,合金的室温拉伸性能稍有下降,而塑性略微增加。经920 °C/2h,AC+580 °C/1h,AC热处理后,可使合金获得较好的强度–塑性的匹配。

    Abstract:

    TC8M-1 titanium alloy was the newly developed hot strength and long life high temperature titanium alloy, which the highest serviceability temperature can be reached at 450 °C. The effect of heat treatment process on microstructure and mechanical properties of TC8M-1 titanium alloy was researched by using solution and aging treatment at different temperatures. The results show that the content of equiaxed primary α phase decreases gradually and the transformed β structure becomes coarse with the increasing of solution temperature. Meanwhile, the equiaxed microstructure transforms into duplex microstructure. Therefore, the room temperature strength presents the decrease trend. However, the content of equiaxed primary α phase changes little with the increasing of aging temperature. The stretch strength at room temperature drops a little, but the ductility increases slightly. After heat treatment at 920 °C/2h, AC+580 °C/1h, AC, the TC8M-1 titanium alloy can be obtain the optimum combination of strength with plasticity.

    参考文献
    [1] Dong Baoming(董宝明), Zhang Sheng(张胜), Guo Delun(郭德伦), et al. Titanium alloys: Russian aircraft and aerospace application [M]. Beijing: Aviation Industry Press, 2008
    [2] He Yu(何瑜), Wei Shouyong(魏寿庸). Titanium Industry Progress [J], 2004, 21(2): 16
    [3] Mao Xiaonan(毛小南), Zhao Yongqing(赵永庆), Yang Guanjun(杨冠军). Rare Metals Letters [J], 2007, 26(5): 1
    [4] Wei Shouyong(魏寿庸), He Yu(何瑜), Wang Qingjiang(王清江), et al. Aero-engine [J], 2005, 31(1): 52
    [5] Xu Feng(徐锋), Yang Yi(杨义), Li Changfu(李长富), et al. Acta Metallugica Sinica [J], 2005, 41(10): 1057
    [6] Donachie M J. Titanium: A Technical Guide [M]. 2nd Edition. USA: ASM International, 2000
    [7] Cai Jianming(蔡建明), Cao Chunxiao(曹春晓). Journal of Aeronautical Materials [J], 2014, 34(4): 27
    [8] Liao Mingfu(廖明夫), Tan Dali(谭大力), Geng Jianming(耿建明), et al. Journal of Aerospace Power [J], 2014, 29(7): 1505
    [9] He Pingzhi(和平志), Liu Huifang刘惠芳(), Wei Shouyong(魏寿庸), et al. Titanium Industry Progress [J], 2009, 26(5): 18
    [10] Wang K, Li M Q. Materials Science and Engineering: A [J]. 2014, 600(0): 122
    [11] Tao Hailin(陶海林), Li Geping(李阁平), Zhang Peng(张鹏), et al. China Titanium Industry [J], 2012, (2): 23
    [12] Liu Huifang(), Li Geping(), Wei Shouyong(), et al. Titanium Industry Progress [J], 2006, 23(6): 33
    [13] Wang Tengfei(王腾飞), Zeng Weidong(曾卫东), Peng Wenwen(彭雯雯), et al. Hot Working Technology [J], 2011, 40(12): 57
    [14] Liu Huifang(刘惠芳), Li Geping(李阁平), He Pingzhi(和平志), et al. Rare Metal Materials and Engineering [J], 2005, 34(Suppl. 3): 501
    [15] Valentin N. Moiseyev. Titanium Alloy: Russian Aircraft and Aerospace Applications [M]. American: CRC Press, Taylor Francis Group, 2006
    [16] Feng Qiuyuan(冯秋元), Fang Bo(方波), Chen Zhiyong(陈志勇), et al. Preparation of TC8-1 titanium alloy large-sized bars. Titanium Industry Progress [J], 2015, 32(1): 30
    [17] Zhang Zhi(张智), Li Wei(李维), Liao Qiang(廖强), et al. Mechanical Engineering Automation [J], 2014, (3): 108
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

冯秋元,雒水会,马宏刚,张永强,张平辉,王鼎春,高颀.热处理工艺对TC8M-1钛合金组织和性能的影响[J].稀有金属材料与工程,2017,46(S1):41~44.[Feng Qiuyuan, Luo Shuihui, Ma Honggang, Zhang Yongqiang, Zhang Pinghui, Wang Dingchun, Gao Qi. Effect of heat treatment process on microstructure and properties ofTC8M-1 titanium alloy[J]. Rare Metal Materials and Engineering,2017,46(S1):41~44.]
DOI:[doi]

复制
文章指标
  • 点击次数:1534
  • 下载次数: 1927
  • HTML阅读次数: 81
  • 引用次数: 0
历史
  • 收稿日期:2016-05-11
  • 最后修改日期:2016-05-11
  • 录用日期:2017-08-08
  • 在线发布日期: 2017-12-13