+高级检索
钙钛矿型La1-xSrxMnO3纳米薄膜的制备及其光催化性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

河北省自然科学基金资助项目(B2008 000758)


Preparation and Photo-Catalytic Activity of Perovskite La1-xSrxMnO3 Nano Thin-Film
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用溶胶-凝胶法和浸渍提拉技术在载玻片基底上制备出钙钛矿型La1-xSrxMnO3纳米薄膜;采用TG/DTA技术分析前驱体凝胶的热分解历程;利用AFM观察薄膜的形貌特征;通过XRD进行物相分析,并计算其晶粒尺寸。结果表明,La1-xSrxMnO3薄膜在600 ℃形成,为钙钛矿结构,其平均晶粒尺寸为10.349 nm。采用该薄膜对多种水溶性染料进行光催化降解试验的结果表明,掺杂后该类纳米薄膜有较好的光催化效果,当x=0.2时光催化效果最好。

    Abstract:

    The perovskite La1-xSrxMnO3 nano thin-film on the slide glass basis were prepared by sol-gel method and dip-coating technology. The heat decomposition of the precursor gel was analyzed by means of TG/DTA. The appearance characteristic of the thin film was observed by AFM. The phase change was analyzed by XRD and crystal grain size was also calculated. The results show that the perovskite La1-xSrxMnO3 thin film can be synthesized at 600 °C and average crystal grain size is 10.349 nm. The degradation experiment of various water-soluble dyestuffs was performed using the film as photo-catalyst. The results reveal that this nano thin-film with Sr doping has good photo-catalysis and when x=0.2 the effect is best.

    参考文献
    相似文献
    引证文献
引用本文

胡 婕,邵光杰,黄 浩,邢广忠.钙钛矿型La1-xSrxMnO3纳米薄膜的制备及其光催化性能[J].稀有金属材料与工程,2010,39(1):173~176.[Hu Jie, Shao Guangjie, Huang Hao, Xing Guangzhong. Preparation and Photo-Catalytic Activity of Perovskite La1-xSrxMnO3 Nano Thin-Film[J]. Rare Metal Materials and Engineering,2010,39(1):173~176.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2009-01-16
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: