+高级检索
AgSnO2电触头材料二步烧结工艺的研究
DOI:
作者:
作者单位:

桂林电子科技大学

作者简介:

通讯作者:

中图分类号:

基金项目:

桂林电子科技大学研究生教育创新计划资助项目(XJYC2012030)


Two-Step Sintering Processed of AgSnO2 Electric Contact Materials
Author:
Affiliation:

Guilin University of Electronic Technology

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文研究了AgSnO2电触头材料的二步烧结工艺。通过讨论预烧温度、预烧时间和升温速率对AgSnO2电触头材料性能的影响, 确定了最佳的预烧温度和时间为700℃?.5h, 最佳升温速率是预烧前15K/min, 预烧后3K/min。对二步烧结工艺与常用一次烧结工艺制备的AgSnO2电触头材料的性能与显微组织进行了比较,结果表明:二步煅烧工艺提高了AgSnO2粉体烧结活性,促进了粉末在高温烧结阶段的致密化,最终大大改善了AgSnO2烧坯的显微组织,提高了其性能。

    Abstract:

    The Two-Step Sintering processed of AgSnO2 electric contact materials was studied. By the discussion for the effect of pre-sintering temperature, pre-sintering time and heating rate on the properties of AgSnO2 electric contact materials, we confirm the optimal pre-sintering temperature and pre-sintering time are 700℃ for 0.5h and the beat heating rate are 15K per minute before pre-sintering and 3K per minute after pre-sintering. By the comparative study on properties and microstructures of AgSnO2 electric contact materials prepared by two step sintering process and the traditional one-step sintering process, The results indicate that two-step sintering processed AgSnO2 electric contact material possesses improved sintering activity of AgSnO2 power and promotes its densification in the high-temperature-sintering stage which eventually improved the microstructure and performance of AgSnO2 electric contact materials.

    参考文献
    相似文献
    引证文献
引用本文

徐涛. AgSnO2电触头材料二步烧结工艺的研究[J].稀有金属材料与工程,2016,45(1):232~235.[xutao. Two-Step Sintering Processed of AgSnO2 Electric Contact Materials[J]. Rare Metal Materials and Engineering,2016,45(1):232~235.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2014-01-14
  • 最后修改日期:2014-02-26
  • 录用日期:
  • 在线发布日期: 2019-01-04
  • 出版日期: