+高级检索
Sm3 掺杂Co2Z型铁氧体的组织结构和吸波性能
DOI:
作者:
作者单位:

钢铁研究总院

作者简介:

通讯作者:

中图分类号:

TM25

基金项目:

国家自然科学基金 (11205050)


Microstructures and microwave absorbing properties of Sm3 doped Co2Z-type hexagonal ferrite
Author:
Affiliation:

Central Iron and Steel Research Institute

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用普通陶瓷工艺制备了Sm3 掺杂的Co2Z型平面六角铁氧体,研究了Sm3 掺杂Co2Z型铁氧体材料的组织结构和吸波性能。结果表明,掺杂一定量Sm3 的铁氧体相结构仍以Co2Z型六角晶系相为主相,但出现了呈颗粒状弥散分布的富Sm相。掺杂Sm3 样品的吸波性能明显优于未掺杂Sm3 样品,在频率为6.3GHz时,其最大反射损耗可达到-20dB,耗损大于10dB 的频带带宽为5GHz,具有较宽的吸收频带。吸波涂层的附着力均大于10MPa,具有良好的力学性能。

    Abstract:

    The Sm3 doped Co2Z-type hexagonal ferrite materials were prepared by the conventional ceramic method and the microstructures and microwave absorbing properties of the materials were investigated. The influence of a certain amount of Sm3 addition on structures and microwave absorbing properties of the materials were investigated. The results show that Co2Z-type hexaferrite is still main phase in the Co2Z ferrite materials doped with Sm3 . It is observed that Sm-rich phase with granular morphology is dispersed in the main phase. The Sm3 doped Co2Z ferrite exhibited better microwave absorbing properties than the Sm3 undoped one. The maximum reflection loss of Sm3 doped Co2Z ferrite reached -20dB at 6.3GHz,and the frequency bandwidth of reflection loss more than 10 dB was 5GHz. The wave absorbing coating had good mechanical property and the adhesions of the coatings were higher than 10MPa.

    参考文献
    相似文献
    引证文献
引用本文

郭世海. Sm3 掺杂Co2Z型铁氧体的组织结构和吸波性能[J].稀有金属材料与工程,2016,45(12):3223~3226.[Guo Shihai. Microstructures and microwave absorbing properties of Sm3 doped Co2Z-type hexagonal ferrite[J]. Rare Metal Materials and Engineering,2016,45(12):3223~3226.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2014-09-19
  • 最后修改日期:2014-10-28
  • 录用日期:2014-12-03
  • 在线发布日期: 2017-02-06
  • 出版日期: