+高级检索
C/C复合材料大气等离子喷涂mullite/ZrB2-MoSi2涂层抗烧蚀性能
DOI:
作者:
作者单位:

华南理工大学材料科学与工程学院,广东省新材料研究所,广东省新材料研究所,广东省新材料研究所,华南理工大学材料科学与工程学院,广东省新材料研究所

作者简介:

通讯作者:

中图分类号:

TB332

基金项目:

广东省自然科技基金(No. 2016A030312015);广东省科学计划项目 (No. 2013B050800031,No.2014B050502008 and No.2015B070701024)


Ablation Resistance of APS Sprayed Mullite/ZrB2-MoSi2 Coating for Carbon/Carbon Composites
Author:
Affiliation:

School of Materials Science and Engineering,South China University of Technology,Guangdong Institute of New Materials,National Engineering Laboratory for Modern Materials surface Engineering Technology,Guangdong Provincial Key Lab for Modern Materials Surface Engineering Technology,Guangdong Institute of New Materials,National Engineering Laboratory for Modern Materials surface Engineering Technology,Guangdong Provincial Key Lab for Modern Materials Surface Engineering Technology,Guangdong Institute of New Materials,National Engineering Laboratory for Modern Materials surface Engineering Technology,Guangdong Provincial Key Lab for Modern Materials Surface Engineering Technology,School of Materials Science and Engineering,South China University of Technology,Guangdong Institute of New Materials,National Engineering Laboratory for Modern Materials surface Engineering Technology,Guangdong Provincial Key Lab for Modern Materials Surface Engineering Technology

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用大气等离子喷涂技术(APS)在C/C复合材料表面制备了mullite/ZrB2-MoSi2双层抗烧蚀涂层。借助XRD、SEM、EDS等分析手段对涂层的组织结构进行研究;基于氧丙烯焰烧蚀试验考察ZrB2-MoSi2/mullite复合涂层对C/C复合材料高温耐烧蚀性能的影响。结果表明,在1700 °C和1800 °C的氧丙烯焰下烧蚀60 s,ZrB2-MoSi2/mullite涂层试样的质量烧蚀率分别为3.49×10-3 g/s与3.77×10-3 g/s。其与单层ZrB2-MoSi2涂层试样相比,ZrB2-MoSi2/mullite涂层试样展现了出色的抗烧蚀性能。烧蚀过程中形成的硅酸盐玻璃可以作为热障层而减少氧气的进一步渗透,并且还具有自我封填缺陷的能力,使ZrB2-MoSi2/mullite涂层表现较好的抗烧蚀性。

    Abstract:

    Mullite/ZrB2-MoSi2 coating was deposited on carbon/carbon(C/C) composites to protect against ablation by atmospheric plasma spraying (APS). The microstructure and morphology of the coating were characterized by X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. The ablation resistance of the coating was investigated at different temperatures with oxypropylene torch. The mass ablation rates of the Mullite/ZrB2-MoSi2 coated C/C composites were 3.49×10-3 g/s and 3.77×10-3 g/s after ablation at 1700 °C and 1800 °C for 60 s respectively, which exhibited good ablation resistance compared with the single-layer ZrB2-MoSi2 coated. The increase of ablation resistance can be attributed to the formation of a silicates glass film, which acted as thermal barrier and self-sealed the defects of the coatings.

    参考文献
    相似文献
    引证文献
引用本文

韩伟,刘敏,邓春明,刘学璋,曾德长,周克崧. C/C复合材料大气等离子喷涂mullite/ZrB2-MoSi2涂层抗烧蚀性能[J].稀有金属材料与工程,2018,47(4):1043~1048.[Han Wei, Liu Min, Deng Chunming, Liu Xuezhang, Zeng Dechang, Zhou Kesong. Ablation Resistance of APS Sprayed Mullite/ZrB2-MoSi2 Coating for Carbon/Carbon Composites[J]. Rare Metal Materials and Engineering,2018,47(4):1043~1048.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-07-21
  • 最后修改日期:2018-04-19
  • 录用日期:2016-09-14
  • 在线发布日期: 2018-05-31
  • 出版日期: