陈连生,张鑫磊,郑小平,宋进英,田亚强.轧制双金属复合板材的研究现状[J].稀有金属材料与工程,2018,47(10):3243~3250.[Chen Liansheng,Zhang Xinlei,Zheng Xiaoping,Song Jinying,Tian Yaqiang.Research Progress of Bimetal Laminated Composite Plate by Rolling Process[J].Rare Metal Materials and Engineering,2018,47(10):3243~3250.]
轧制双金属复合板材的研究现状
投稿时间:2017-02-20  修订日期:2017-04-01
中文关键词:  双金属复合板材  同步轧制  异步轧制  界面结合
基金项目:国家自然科学基金资助(51474091);河北省自然科学基金资助(E2017209121);唐山市科技创新团队培养计划项目(15130202C)
中文摘要:
      轧制复合技术是双金属复合板材的主要制备技术之一,迄今已有上百年研究与应用历史。该技术可分为冷轧复合、热轧复合、爆炸-轧制复合、异步轧制复合等工艺。首先概括介绍了待复合金属表面处理方法,然后综述了各轧制复合工艺的特点、界面结合理论、研究与应用现状,重点评述了热轧复合、异步轧制复合工艺的研究现状,最后展望了该技术的发展方向。
Research Progress of Bimetal Laminated Composite Plate by Rolling Process
英文关键词:bimetal laminated composite plate  symmetric rolling  asymmetric rolling  bonding interface
英文摘要:
      Roll bonding technology is one of the main preparation technologies of the bimetal laminated composite plate, and the history of its research and application over 100 years. It includes many methods, such as cold-roll bonding, hot-roll bonging, explosive rolling bonding, asymmetric rolling bonding, and so on. Firstly, the surface treatment methods of the rolling pieces were briefly introduced. Then, the technics characterizations, interface bonding theories and application of the roll bonding technology were summarized. The research status of the hot-roll bonding method and the asymmetric rolling bonding method was elaborated, especially. Last, the prospect of the technology was outlook.
作者单位E-mail
陈连生 1华北理工大学 冶金与能源学院 kyckfk@ncst.edu.cn 
张鑫磊 1华北理工大学 冶金与能源学院  
郑小平 1华北理工大学 冶金与能源学院 zhengxp1978@163.com 
宋进英 1华北理工大学 冶金与能源学院  
田亚强 1华北理工大学 冶金与能源学院  
摘要点击次数: 44
全文下载次数: 14
查看全文  查看/发表评论  下载PDF阅读器
关闭