石晨晓,刘元富,李勇,孙广宝,张政,冯志成.等离子熔化沉积TiC增强Inconel 718基原位自生复合材料显微组织及高温耐磨性[J].稀有金属材料与工程,2019,48(5):1497~1504.[Shi Chenxiao,Liu Yuanfu,Li Yong,Sun Guangbao,Zhang Zheng,Feng Zhicheng.Microstructure and High Temperature Wear Resistance of TiC/Inconel 718 Composites In-situ Synthesized by Plasma Melting Deposition Technique[J].Rare Metal Materials and Engineering,2019,48(5):1497~1504.]
等离子熔化沉积TiC增强Inconel 718基原位自生复合材料显微组织及高温耐磨性
投稿时间:2018-03-16  修订日期:2018-05-08
中文关键词:  等离子熔化沉积  Inconel 718  显微组织  原位自生  高温耐磨性
基金项目:清华大学摩擦学国家重点实验室开放基金资助(项目号SKLTKF17B06)
中文摘要:
      为改善镍基高温合金Inconel 718的高温耐磨性,利用同轴送粉等离子熔化沉积快速成形技术原位合成了TiC增强Inconel 718高温合金基高温耐磨复合材料。分析了复合材料的显微组织结构和原位自生过程,探讨了增强相TiC的含量对复合材料的显微硬度及高温干滑动摩擦磨损性能的影响规律,研究了复合材料的高温磨损机理。结果表明:复合材料组织细小致密,显微硬度随TiC增强相体积分数增加而相应提高;在高温干滑动磨损实验条件下,复合材料表现出优异的耐磨性。
Microstructure and High Temperature Wear Resistance of TiC/Inconel 718 Composites In-situ Synthesized by Plasma Melting Deposition Technique
英文关键词:plasma melting deposition  Inconel 718  microstructure  in-situ synthesis  high temperature wear resistance.
英文摘要:
      In order to modify the wear resistance of Inconel 718 superalloy, TiC reinforced Inconel 718 superalloy based composites were in-situ synthesized by co-axial powder feeding plasma melting deposition technique. Microstructure and in-situ synthesized process of the composites was analysed. The effect of volume fraction of the TiC reinforcing phase on microhardness and high temperature dry sliding wear properties of composites was discussed. The high temperature wear mechanism of the composites was studied. Results show that the microstructure of composites is refined and dense, microhardness values are remarkably influenced by the volume fraction of the TiC primary phase. The higher the volume fraction of the TiC primary phase, the higher the microhardness values of the composites. The composites showed excellent wear resistance under high temperature dry sliding wear test conditions.
作者单位E-mail
石晨晓 北京交通大学 16121353@bjtu.edu.cn 
刘元富 北京交通大学  
李勇 西藏大学  
孙广宝 北京交通大学  
张政 北京交通大学  
冯志成 北京交通大学  
摘要点击次数: 146
全文下载次数: 60
查看全文  查看/发表评论  
关闭