+高级检索
低压压制和真空烧结制备银-石墨烯复合材料的致密化行为
DOI:
作者:
作者单位:

昆明贵金属研究所 稀贵金属综合利用新技术国家重点实验室

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金青年科学基金项目、云南省应用基础研究面上项目


Densification Behavior of Ag-Graphene Composites Prepared by Low-pressure Compressing and Vacuum Sintering
Author:
Affiliation:

State Key Laboratory of Advanced Technologies for Comprehensive Utilization,Kunming Institute of Precious Metals

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为阐明低压压制成形和真空烧结制备的银-石墨烯复合材料的致密化行为,通过24 h机械球磨制得石墨烯含量0.5wt.%至2.0wt.%的银-石墨烯复合粉末,随后进行低压双向压制和真空烧结。通过测量复合材料压制后和烧结后的密度,研究了不同成形压力和不同烧结温度工艺条件下复合材料的成形能力和烧结能力。试验结果表明:银-石墨烯粉末的压制数据符合川北公夫方程。致密化系数(K)值随石墨烯含量的增加而增大,表明复合粉末抗塑性变形能力增大。银-0.5wt.%石墨烯复合材料具有最佳的烧结性能。石墨烯含量1.5wt.%的复合材料具有较好增强效果的力学性能,其抗拉强度达到252 MPa。

    Abstract:

    In order to clarify the densification behavior of new Ag-Graphene composites prepared by low-pressure compressing and vacuum sintering, Ag-Graphene mixed powders with different graphene content from 0.5wt.% to 2.0wt.% were prepared by 24 h of ball milling and subsequently double action compressed and vacuum sintered. The densities of composites were measured after compressed and sintered, and the compressibility and sinterability of the composites at varying compaction pressures and varying sintering temperatures were also investigated. The experimental results show that the compaction data of all Ag-Graphene powders are fitted to the Balshin equation. The densification parameter (K values) increases with increasing the graphene contents which indicates the increasing of plastic deformation capacity. The Ag-0.5wt.%Graphene composite has the best sinterability. The composite with 1.5wt.% graphene exhibited much enhanced mechanical properties, namely, a tensile strength of 252 MPa can be achieved.

    参考文献
    相似文献
    引证文献
引用本文

王松,郑婷婷,谢明,李爱坤,侯攀.低压压制和真空烧结制备银-石墨烯复合材料的致密化行为[J].稀有金属材料与工程,2019,48(11):3494~3499.[Wang Song, Zheng Tingting, Xie Ming, Li Aikun, Hou Pan. Densification Behavior of Ag-Graphene Composites Prepared by Low-pressure Compressing and Vacuum Sintering[J]. Rare Metal Materials and Engineering,2019,48(11):3494~3499.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2018-05-16
  • 最后修改日期:2018-09-17
  • 录用日期:2018-10-08
  • 在线发布日期: 2019-12-10
  • 出版日期: