赵天章,金龙,高铁军,刘春忠,徐勇,张士宏.2198铝锂合金的熔炼、轧制和热处理[J].稀有金属材料与工程,2019,48(7):2305~2309.[Zhao Tianzhang,Jin Long,Gao Tiejun,Liu Chunzhong,Xu Yong,Zhang Shihong.Processing of 2198 Al-Li alloy: melting, rolling and heat treatment[J].Rare Metal Materials and Engineering,2019,48(7):2305~2309.]
2198铝锂合金的熔炼、轧制和热处理
投稿时间:2018-07-24  修订日期:2018-08-06
中文关键词:  铝锂合金  熔炼  轧制  热处理
基金项目:国家自然科学基金资助(51605310);辽宁省教育厅基金资助(L201631);航空制造工艺数字化国防重点学科实验室开放基金资助(SHSYS2016004)
中文摘要:
      铝锂合金具有高比强度和高比模量等优点,广泛应用于航空领域。本文系统研究了2198铝锂合金的制造工艺,成功制备了性能优越的板材,为其工业生产提供了理论依据。采用真空感应熔炼法制备了2198铝锂合金铸锭,均匀化处理后,利用多道次热轧将铸锭轧制为板材,经过固溶、淬火、预变形、自然时效和人工时效处理,板材沿轧制方向的抗拉强度高达486MPa。人工时效过程中析出的T1时效相(Al2CuLi),不仅能明显提高板材强度,而且有利于弱化其各向异性。
Processing of 2198 Al-Li alloy: melting, rolling and heat treatment
英文关键词:Al-Li alloy  melting  rolling  heat treatment
英文摘要:
      Al-Li alloy is widely used in the aerospace field, due to its high specific strength and high specific modulus. The processing of 2198 alloy is investigated. 2198 alloy sheet with excellent mechanical properties is successfully manufactured. It will help the industrial production of 2198 Al-Li alloy. The ingot is melted and cast in vacuum induction melting (VIM) furnace. During the followed homogenization the as-cast microstructure can be completely vanished. The ingot is rolled to sheet with 2mm thickness, via multi-pass hot-rolling. Then, the solution, water quenching, pre-deformation, naturally aging and artificial aging are respectively carried out. The tensile strength of final 2198 Al-Li alloy sheet in the rolling direction is 486MPa. The precipitate T1 generated in the artificial aging can not only increase the strength obviously, but also decrease the anisotropy of 2198 Al-Li alloy sheet.
作者单位E-mail
赵天章 沈阳航空航天大学 tzzhao@alum.imr.ac.cn 
金龙 沈阳航空航天大学  
高铁军 沈阳航空航天大学  
刘春忠 沈阳航空航天大学  
徐勇 中国科学院金属研究所  
张士宏 中国科学院金属研究所  
摘要点击次数: 49
全文下载次数: 15
查看全文  查看/发表评论  
关闭