+高级检索
碳纤维表面沉积铜工艺及其参数影响机理研究
DOI:
作者:
作者单位:

1.大连理工大学工业装备结构分析重点实验室;2.中国工程物理研究院应用电子学研究所

作者简介:

通讯作者:

中图分类号:

TG146

基金项目:

国家自然科学基金联合基金(项目号U1630129)


Deposition of Cu on carbon fibers and influence mechanisms
Author:
Affiliation:

1.State Key Laboratory of Structural Analyses for Industrial Equipment,Dalian University of Technology;2.Institute of Applied electronics,China Academy of Engineering Physics

Fund Project:

Joint Funds of the National Natural Science Foundation of China (Grant No.: U1630129)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    碳纤维增强铝基复合材料因具备碳纤维与铝的优良性能,高比强度、比模量,良好的热稳定性及性能与功能的可设计性等特点,在光机结构、航空航天结构件等方面具有广阔的应用前景。为了改善碳纤维与铝基体的界面润湿性能和抑制基体与纤维的界面反应,需要在碳纤维表面沉积铜界面层。本文通过对传统电镀装置的改进,采用了超声振荡分散的电镀装置在碳纤维表面沉积了铜界面层,通过对电镀前碳纤维的预处理、电镀液成分的优选调配,解决了碳纤维铜界面层沉积过程中因纤维束丝难以分散而出现的“夹心”问题(束丝内部纤维难以沉积或不能均匀沉积);在此基础上,详细研究了电镀液添加剂、电镀液PH值、电镀时间等工艺参数对铜界面层的微观结构、铜界面层质量及影响机制,为制备碳纤维增强铝基复合材料提供了一定的技术支持。

    Abstract:

    Carbon fiber reinforced aluminum matrix composite is a very attractive material for the aerospace technologies. However, the poor wetting ability and the chemical reaction between the carbon fibers and aluminum make some difficulties for the fabrication of such composite. In order to improve the wetting behavior and refrain the chemical reaction, to prepare an interphase between carbon fiber and aluminum matrix is essential. In this paper, conventional electroplating equipment was improved to deposit copper interphase on the carbon fibers. It was found the improved equipment could effectively prepare a homogeneous interphase on carbon fibers with the help of plating additives. On this basis, the influence of fiber pretreatment, PH value of electroplating solution and plating time on the quality of copper interphase was investigated. The scanning electron microscopy and X-ray diffractometer were applied to characterize the interphase.

    参考文献
    相似文献
    引证文献
引用本文

吕钊钊,沙建军,林冠璋,张兆甫,祖宇飞,代吉祥,鲜玉强,张伟,崔鼎,严从林.碳纤维表面沉积铜工艺及其参数影响机理研究[J].稀有金属材料与工程,2019,48(12):4010~4015.[Lv Zhaozhao, Sha Jianjun, Lin Guanzhang, Zhang Zhaofu, Zu Yufei, Dai Jixiang, Xian Yuqiang, Zhang Wei, Cui Ding, Yan Conglin. Deposition of Cu on carbon fibers and influence mechanisms[J]. Rare Metal Materials and Engineering,2019,48(12):4010~4015.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2018-09-18
  • 最后修改日期:2018-09-29
  • 录用日期:2018-11-08
  • 在线发布日期: 2020-01-07
  • 出版日期: