刘明华,王文礼,张梦奇,邱玉龙.热处理对Mg-3.4Y-3.6Sm-2.6Zn-0.8Zr(wt%)合金组织和性能的影响[J].稀有金属材料与工程,2019,48(7):2056~2061.[Liu Minghua,Wang Wenli,Zhang Mengqi,Qiu Yulong.Effect of Heat Treatment on the Microstructure and Mechanical Properties of Mg-3.4Y-3.6Sm-2.6Zn-0.8Zr (wt%) Alloy[J].Rare Metal Materials and Engineering,2019,48(7):2056~2061.]
热处理对Mg-3.4Y-3.6Sm-2.6Zn-0.8Zr(wt%)合金组织和性能的影响
投稿时间:2018-12-06  修订日期:2018-12-29
中文关键词:  镁合金  热处理  显微组织  力学性能
基金项目:
中文摘要:
      采用差热分析(DSC)、光学显微镜(OM)、X射线衍射(XRD)、扫描电子显微镜(SEM)、能量色散谱(EDS)及拉伸测试等手段研究了Mg-3.4Y-3.6Sm-2.6Zn-0.8Zr合金经过不同热处理方式后的组织演变及力学性能。提出了500°C固溶处理15h、225°C时效处理40h的最佳热处理制度。500°C固溶15h后,层状长周期堆积有序(LPSO)结构消失,晶界处的(Mg,Zn)3(Y,Sm)从网状相溶解成颗粒状,同时形成大量的长条状相Mg12(Y,Sm)Zn。时效处理后,大量弥散的β′相析出到α-Mg晶粒中,有利于提高合金的屈服强度。试验合金的屈服强度(YS)、抗拉强度(UTS)和延伸率(EL)分别为170.0 MPa、260.8 MPa和14.1%。热处理后断口由沿晶断裂向穿晶断裂转变。
Effect of Heat Treatment on the Microstructure and Mechanical Properties of Mg-3.4Y-3.6Sm-2.6Zn-0.8Zr (wt%) Alloy
英文关键词:magnesium alloy  heat treatment  microstructure  mechanical properties
英文摘要:
      The microstructure evolution and mechanical properties of Mg-3.4Y-3.6Sm-2.6Zn-0.8Zr alloy after different heat treatment experiments were investigated by differential thermal analysis (DSC), optical microscopy (OM), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and tensile test, and the optimum heat treatment systems composing of solid-solution treatment at 500°C for 15 hours and aging treatment at 225°C for 40 hours were proposed. After the solution treatment at 500°C for 15 hours, the layer long period stacking ordered (LPSO) structure disappears, whereas (Mg,Zn)3(Y,Sm) at the grain boundary dissolves into a granular state from the reticular phase, and a large number of long strip phases Mg12(Y,Sm)Zn are formed at the same time. After the aging treatment, a large number of dispersed β′ phases precipitate into the α-Mg grains and it is beneficial to improve the yield strength of the experimental alloy. The yield strength (YS), ultimate tensile strength (UTS) and elongation (EL) of the experimental alloy are 170.0 MPa, 260.8 MPa and 14.1%, respectively. The fracture mode changes from intergranular to transgranular fracture after the heat treatment process.
作者单位E-mail
刘明华 西安建筑科技大学 513629738@qq.com 
王文礼 西安建筑科技大学 wangwl@nwpu.edu.cn 
张梦奇 西安建筑科技大学  
邱玉龙 西安建筑科技大学  
摘要点击次数: 116
全文下载次数: 40
查看全文  查看/发表评论  
关闭