+高级检索
高强耐热Mg-4.5Gd-2.6Nd-0.5Zn-0.5Zr合金
DOI:
作者:
作者单位:

沈阳铸造研究所有限公司

作者简介:

通讯作者:

中图分类号:

基金项目:


High-strength and heat-resistant of Mg-4.5Gd-2.6Nd-0.5Zn-0.5Zr alloy
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    新型Mg-4.5Gd-2.6Nd-0.5Zn-0.5Zr铸造合金的显微组织和力学性能进行了研究。发现了合金的铸态组织由近等轴晶,Mg12(Nd,Gd)和Mg3Gd合金组成。通过最优化热处理后,合金的常温和高温 250℃时的 屈服强度 , 抗拉强度 和延伸率分别为 205MP, 320MP和 4.0%;145MP, 245MP 和 18.5% 。合金的强化原则在文中做了叙述。合金常温下断裂为脆性断裂,高温下为韧性断裂。高温下断裂特征具有很多韧窝和撕裂脊。

    Abstract:

    The microstructures and mechanical properties of Mg-4.5Gd-2.6Nd-0.5Zn-0.5Zr new casting magnesium alloy were researched.It is found that the microstructure of the as-cast experimental alloy is composed of near equiaxed α-Mg, Mg12(Nd,Gd) and Mg3Gd phases. After optimizing the heat treatment parameters, the value of YS , UTS and A reach 205MP, 320MP and 4.0% at room temperature 145MPa,245MPa and 18.5% at 250℃.The strengthening principle of the alloy is studied in this paper. The fracture surfaces of Mg-4.5Gd-2.6Nd-0.5Zn-0.5Zr alloy was brittle fracture at room temperature tensile with and ductile fracture at 250℃ tensile with lots of dimples and tear ridges.

    参考文献
    相似文献
    引证文献
引用本文

占亮.高强耐热Mg-4.5Gd-2.6Nd-0.5Zn-0.5Zr合金[J].稀有金属材料与工程,2020,49(8):2644~2648.[占亮. High-strength and heat-resistant of Mg-4.5Gd-2.6Nd-0.5Zn-0.5Zr alloy[J]. Rare Metal Materials and Engineering,2020,49(8):2644~2648.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2019-05-27
  • 最后修改日期:2019-09-23
  • 录用日期:2019-09-24
  • 在线发布日期: 2020-09-27
  • 出版日期: