姬金金,汪彦江,俞丽丹,贾智,寇生中.深冷处理过程中Inconel 617合金的微观组织演变[J].稀有金属材料与工程,2023,52(4):1244~1250.[Ji Jinjin,Wang Yanjiang,Yu Lidan,Jia Zhi,Kou Shengzhong.Microstructure Evolution of Inconel 617 Alloy During Subzero Treatment[J].Rare Metal Materials and Engineering,2023,52(4):1244~1250.]
深冷处理过程中Inconel 617合金的微观组织演变
投稿时间:2022-11-14  修订日期:2022-11-23
中文关键词:  Inconel 617合金  深冷处理  晶粒细化  几何必须位错  微观织构
基金项目:国家自然科学基金[No. 52265049];甘肃省高等学校产业支撑计划项目[No. 2022CYZC-26];兰州理工大学红柳优秀青年支持计划[No. CGZH001]
中文摘要:
      研究了Inconel 617合金在不同深冷处理时间和次数条件下微观组织的演变规律。结果表明,深冷处理对Inconel 617合金的微观组织结构有很大的影响,随着深冷处理时间的延长,晶粒尺寸减小,但是随着深冷处理次数的增加,晶粒尺寸又增大,并且细化晶粒的晶界处具有高的应力。晶格常数与晶粒尺寸的变化相反。深冷处理试样析出了MC、M6C、M23C6的简单和复杂碳化物,导致了位错的塞积。深冷处理24 h后试样的几何必须位错(GND)密度增大,当24 h循环处理2次后,GND密度显著降低。此外,深冷处理导致Inconel 617合金的旋转立方织构和旋转铜织构转变为黄铜织构、P织构、高斯织构。
Microstructure Evolution of Inconel 617 Alloy During Subzero Treatment
英文关键词:Inconel 617 alloy  subzero treatment  grain refinement  geometrically necessary dislocation  microtexture
英文摘要:
      The relationship of microstructure evolution with subzero treatment time and number of Inconel 617 alloy was studied. The results indicate that subzero treatment has an obvious influence on the microstructure of Inconel 617 alloy. With the increase in subzero treatment time, the grain size decreases. With the increase in subzero treatment number, the grain size increases gradually, and the high stress is retained at the boundaries of the refined grains. The lattice constant varies inversely with the grain size. The simple and complex carbides of MC, M6C and M23C6 are precipitated from the samples after subzero treatment, which leads to the accumulation of dislocations. The geometrically necessary dislocation density of the samples increases after subzero treatment for 24 h, and decreases significantly with two times of subzero treatment for 24 h. In addition, after subzero treatment, the rotated cube texture and rotated copper texture transform to brass texture, P texture and goss texture.
作者单位E-mail
姬金金 兰州理工大学 材料科学与工程学院甘肃 兰州 730050
兰州理工大学 有色金属先进加工与再利用国家重点实验室甘肃 兰州 730050
兰州工业学院 材料工程学院甘肃 兰州 730050 
617599947@qq.com 
汪彦江 兰州理工大学 材料科学与工程学院甘肃 兰州 730050
兰州理工大学 有色金属先进加工与再利用国家重点实验室甘肃 兰州 730050 
wang1490848533@163.com 
俞丽丹 兰州理工大学 材料科学与工程学院甘肃 兰州 730050
兰州理工大学 有色金属先进加工与再利用国家重点实验室甘肃 兰州 730050 
2672664668@qq.com 
贾智 兰州理工大学 材料科学与工程学院甘肃 兰州 730050
兰州理工大学 有色金属先进加工与再利用国家重点实验室甘肃 兰州 730050 
jiazhi@lut.edu.cn 
寇生中 兰州理工大学 材料科学与工程学院甘肃 兰州 730050
兰州理工大学 有色金属先进加工与再利用国家重点实验室甘肃 兰州 730050 
kousz@lut.edu.cn 
摘要点击次数: 112
全文下载次数: 96
查看全文   查看/发表评论    HTML
关闭