Parallel Groove-Textured TB6 Titanium Alloy Surfaces for Improving Wettability, Tribological Properties and Corrosion Resistance

doi:10.12442/j.issn.1002-185X.20230268

Home > Archive>Volume 53, Issue 3, 2024 >617-624. DOI:10.12442/j.issn.1002-185X.20230268

Parallel Groove-Textured TB6 Titanium Alloy Surfaces for Improving Wettability, Tribological Properties and Corrosion Resistance
DOI:
                        10.12442/j.issn.1002-185X.20230268
                    
Author:
                        Guo Jialiang1Guo Jialiang
International Joint-Laboratory of Electronic Materials and Systems of Henan Province, National Center for International Joint Research of Electronic Materials and Systems, School of Electrical and Information Engineering, Zhengzhou University, Zhengzhou 450001, China
Find this author on All Journals
Find this author on BaiDu
Search for this author on this site
Wang Fang1,2,3,4Wang Fang
International Joint-Laboratory of Electronic Materials and Systems of Henan Province, National Center for International Joint Research of Electronic Materials and Systems, School of Electrical and Information Engineering, Zhengzhou University, Zhengzhou 450001, China;Institute of Intelligence Sensing, Zhengzhou University, Zhengzhou 450001, China;Research Institute of Industrial Technology Co., Ltd, Zhengzhou University, Zhengzhou 450001, China;Zhengzhou Way Do Electronics Co., Ltd, Zhengzhou 450001, China
Find this author on All Journals
Find this author on BaiDu
Search for this author on this site
J Liou Juin5J Liou Juin
School of Electrical and Information Engineering, North Minzu University, Yinchuan 750001, China
Find this author on All Journals
Find this author on BaiDu
Search for this author on this site
Liu Yuhuai1,2,3,4Liu Yuhuai
International Joint-Laboratory of Electronic Materials and Systems of Henan Province, National Center for International Joint Research of Electronic Materials and Systems, School of Electrical and Information Engineering, Zhengzhou University, Zhengzhou 450001, China;Institute of Intelligence Sensing, Zhengzhou University, Zhengzhou 450001, China;Research Institute of Industrial Technology Co., Ltd, Zhengzhou University, Zhengzhou 450001, China;Zhengzhou Way Do Electronics Co., Ltd, Zhengzhou 450001, China
Find this author on All Journals
Find this author on BaiDu
Search for this author on this site

                    
Affiliation:1.International Joint-Laboratory of Electronic Materials and Systems of Henan Province, National Center for International Joint Research of Electronic Materials and Systems, School of Electrical and Information Engineering, Zhengzhou University, Zhengzhou 450001, China;2.Institute of Intelligence Sensing, Zhengzhou University, Zhengzhou 450001, China;3.Research Institute of Industrial Technology Co., Ltd, Zhengzhou University, Zhengzhou 450001, China;4.Zhengzhou Way Do Electronics Co., Ltd, Zhengzhou 450001, China;5.School of Electrical and Information Engineering, North Minzu University, Yinchuan 750001, China
Clc Number:
Fund Project:National Natural Science Foundation of China (62174148); National Key Research and Development Program (2022YFE0112000, 2016YFE0118400); Key Program for International Joint Research of Henan Province (231111520300); Ningbo Major Project of “Science, Technology and Innovation 2025” (2019B10129); Zhengzhou 1125 Innovation Project (ZZ2018-45)

Article

Figures

Metrics

Reference [30]

Cited by

Materials

Comments

Abstract:

We proposed an efficient method to fabricate superhydrophobic, wear and corrosion resistant groove-textured surfaces based on TB6 (Ti-10V-2Fe-3Al) titanium alloy substrates. The smooth surface of the titanium alloy was ablated using a nanosecond laser to create a surface with a parallel groove pattern. In order to further improve the surface hydrophobicity, the laser treated surface was irradiated by an ultraviolet lamp for 1 h and subsequently immersed in a 3wt% octadecyltrichlorosilane solution for 2 h for chemical modification. The wettability of the groove-textured surfaces with varying groove spacing was investigated by analyzing surface morphology and chemical composition. Results show that the average coefficient of friction (COF) of the superhydrophobic surface is reduced by 34%, 56%, and 59% compared with that of the original hydrophilic surface under dry, water, and oil lubrication conditions, respectively. The mechanism variation of the CoF was also discussed. Potentiokinetic polarization testing demonstrates that the prepared superhydrophobic surface provides corrosion protection for the titanium alloy substrate.

Key words:laser texturing;titanium alloy;superhydrophobicity;tribological properties;corrosion resistance

Reference

[1] Cui C, Hu B M, Zhao L et al. Materials & Design[J], 2011, 32(3): 1684

[2] Diao Guilin, Sun Xuetong, Lin Huaishu et al. Rare Metal Materials and Engineering[J], 2021, 50(6): 2144 (in Chinese)

[3] Siony N, Vuong L, Lundaajamts O et al. Materials Today Communications[J], 2022, 33: 104465

[4] Uwais Z A, Hussein M A, Samad M A et al. Arabian Journal for Science and Engineering[J], 2017, 42: 4493

[5] Huang Feng, Nie Ming, Lin Jiedong et al. Rare Metal Materials and Engineering[J], 2017, 46(12): 3693

[6] Wei R. Surface and Coatings Technology[J], 1996, 83(1?3): 218

[7] Sahoo B, Das T, Paul J. Surface Review and Letters[J], 2022, 29(9): 1

[8] Mao B, Siddaiah A, Liao Y et al. Journal of Manufacturing Processes[J], 2020, 53: 153

[9] Shen X, Yang L, Fan S et al. Optics Communications[J], 2020, 466: 125687

[10] Yu Z, Yang G, Zhang W et al. Journal of Materials Processing Technology[J], 2018, 255: 129

[11] Liu Q, Liu Y, Li X et al. Wear[J], 2021, 477: 203784

[12] Boyer R R. JOM[J], 1980, 32(3): 61

[13] Ma X, Li F, Cao J et al. Materials Science and Engineering A[J], 2018, 710: 1

[14] Yao C F, Tan L, Ren J X et al. Journal of Failure Analysis and Prevention[J], 2014, 14: 102

[15] Tang J, Luo H, Qi Y et al. Electrochimica Acta[J], 2018, 283: 1300

[16] Misyura S Y, Kuznetsov G V, Feoktistov D V et al. Surface and Coatings Technology[J], 2019, 375: 458

[17] Barthwal S, Barthwal S. Journal of Applied Polymer Science[J], 2023: 140(17): e53766

[18] Adam N K. Nature[J], 1957, 180(4590): 809

[19] Cassie A B D, Baxter S. Transactions of the Faraday Society[J], 1944, 40: 546

[20] Guo J, Wang F, Liou J J et al. Ukrainian Journal of Physical Optics[J], 2022, 23(4): 243

[21] Li Dan, Yang Xuefeng, Lu Chongyang et al. Tribology Interna- tional[J], 2020, 142: 106016

[22] Wang C, Li Z, Zhao H et al. Tribology International[J], 2020, 152: 106475

[23] Rosenkranz A, Reinert L, Gachot C et al. Wear[J], 2014, 318(1?2): 49

[24] Zhong Y J, Xie G Y, Sui G X et al. Journal of Applied Polymer Science[J], 2011, 119(3): 1711

[25] Olah A, Hillborg H, Vancso G J. Applied Surface Science[J], 2005, 239(3?4): 410

[26] Vermeulen M, Scheers J. International Journal of Machine Tools and Manufacture[J], 2001, 41(13?14): 1941

[27] Chen G, Zhao J, Chen K et al. Langmuir[J], 2020, 36(4): 852

[28] Chen D, Liu X, Zhang H et al. Micromachines[J], 2017, 8(7): 223

[29] Chan C W, Lee S, Smith G et al. Applied Surface Science[J], 2016, 367: 80

[30] Zhang B, Li J, Zhao X et al. Chemical Engineering Journal[J], 2016, 306: 441

Get Citation

[Guo Jialiang, Wang Fang, J Liou Juin, Liu Yuhuai. Parallel Groove-Textured TB6 Titanium Alloy Surfaces for Improving Wettability, Tribological Properties and Corrosion Resistance[J]. Rare Metal Materials and Engineering,2024,53(3):617~624.]
DOI：10.12442/j. issn.1002-185X.20230268

Copy

Article Metrics

Abstract:588
PDF: 928
HTML: 124
Cited by: 0

History

Received:May 06,2023
Revised:June 30,2023
Adopted:July 28,2023
Online: March 22,2024
Published: March 20,2024

Home

Introduction

Editorial Board

Submission Guideline

Contact Us

中文

Get Citation

Article Metrics

History