| |
Volume 45,Issue 9,2016 Table of Contents
材料科学 | | | Enhanced hardness and wear property by in-situ formation of mul-ti-component borides in Al0.5CoCrCuFeNiBx high-entropy alloys | | | Liu Xiaotao,Lei Wenbin,Ma Lijuan,Liu Jinling,Liu Jing and Cui Jianzhong | | | 2016,45(9):2201-2207 [Abstract(2854)] [View PDF] | | | | | Effects of heat treatment on microstructure and mechanical properties of as-extruded Mg-9Sn-1.5Y-0.4Zr magnesium alloy | | | zhangdaidong,haoxiaowei,fangdaqing and chaiyuesheng | | | 2016,45(9):2208-2213 [Abstract(1882)] [View PDF] | | | | | Enhanced photocatalytic activity of Cu2O/Cu heterogeneous nanoparticles synthesized in aqueous colloidal solutions on degrada | | | Tao Ping,Shao Mihua,song chengwen,Wu Shuaihua and Cheng Murong | | | 2016,45(9):2214-2218 [Abstract(1774)] [View PDF] | | | | | Formation quality optimization and performance of INCONEL 625 cladding using hot-wire pulsed TIG | | | guolonglong,Hualin Zheng,Shaohu Liu,Chunyu Feng and Yueqin Li | | | 2016,45(9):2219-2226 [Abstract(1412)] [View PDF 597.13 K (2552)] | | | | | Study on the rheological model of semi-solid Al2Y/AZ91 magnesium matrix composites slurry prepared by ultrasonic vibration | | | huangwenxian and yan hong | | | 2016,45(9):2227-2231 [Abstract(1224)] [View PDF] | | | | | Structural and Hydrophilic characteristics of N-doped TiOx films deposited by RF-Magnetron Sputtering | | | chengchunyu,linzeng,wangfang and limuqin | | | 2016,45(9):2232-2236 [Abstract(1614)] [View PDF] | | | | | Study on the Microstructures and Mechanical Properties of the Al-12Zn-2.4Mg-1.2Cu Alloy under Different Deformation Ways | | | chen gang | | | 2016,45(9):2237-2241 [Abstract(1853)] [View PDF] | | | | | Effect of intermetallic compounds on the fracture behavior of a Mg/Al laminated composite fabricated by accumulative roll bonding | | | H. Chang and M. Y. Zheng | | | 2016,45(9):2242-2245 [Abstract(1195)] [View PDF] | | | | | Effect of Y addition on the isothermal oxidation behaviour of a Ti50Ni50 shape memory alloy at 700℃ | | | J. W. Xu,A. L. Liu,S.H. Wang,Y. B. Zhou,H. Zhang and W Cai | | | 2016,45(9):2246-2252 [Abstract(1200)] [View PDF] | | | | | The influence of annealing time on Σ3 boundary and Σ9 boundary evolutions in Hastelloy C-276 | | | ZHANG Xiaoyu,LI Defu,GUO Shengli and ZHAO Xianming | | | 2016,45(9):2253-2257 [Abstract(1316)] [View PDF] | | | | | Study on the mechanical behaviors and microstructure of CuW alloy under hot compression | | | Yanlong Wang,Baoe Wang,Shasha Wu,Junbo Wang and Shuhua Liang | | | 2016,45(9):2258-2262 [Abstract(1170)] [View PDF] | | | | | Effect of static annealing on microstructure and texture of Mg-Gd-Y-Zr extruded alloy | | | Li Li,Wu YiPing,Wu Yuanzhi and Wu Jie | | | 2016,45(9):2263-2268 [Abstract(1224)] [View PDF] | | | | | Research Progress in Magnesium Alloys as Functional Materials | | | Chen Xianhua | | | 2016,45(9):2269-2274 [Abstract(1894)] [View PDF] | | | | | Effect of trace Sm addition on microstructure and mechanical properties of AZ61 magnesium alloys | | | huzhi | | | 2016,45(9):2275-2281 [Abstract(1940)] [View PDF] | | | | | The formation and influence mechanism as well as experimental characterization of composite porosity | | | li shu jian and Zhan Lihua | | | 2016,45(9):2282-2286 [Abstract(4526)] [View PDF] | | | | | Design and Charaterization of Porous Titanium Scaffold for Bone Tissue Engineering | | | Deng Zhenbo,zhouchangchun,Fan Yujiang,Peng Jingping,Zhu Xiangdong,Pei Xuan,Yin Guofu and Zhang Xingdong | | | 2016,45(9):2287-2292 [Abstract(1808)] [View PDF] | | | | | The effect of mixing enthalpy on the β-relaxation in Zr-Cu and Zr-Ni metallic glasses | | | Gao Xuanqiao,Bai Haiyang,Guo Linjiang,Ren Guangpeng,Xue Jianrong,Yin Tao,Hu Zhongwu and Li Laiping | | | 2016,45(9):2293-2296 [Abstract(1472)] [View PDF] | | | | | Fracture toughness of Ti/TiB2 bionic multilayers on the surface of titanium alloy | | | Zhou Guang-hong,DING Hong-yan,Yin Feng,Wang Xiangming,Zhuang Guozhi and Xia Mujian | | | 2016,45(9):2297-2302 [Abstract(1363)] [View PDF] | | | | | Study on the indentation creep performed on nickel based single crystal superalloys | | | Yan Wu Zhu | | | 2016,45(9):2303-2306 [Abstract(1861)] [View PDF] | | | | | The microstructure of adiabatic shear bands in the TC4 titanium alloy induced by high-speed projectile impact | | | Yang Shen and Guan Qingfeng | | | 2016,45(9):2307-2312 [Abstract(1312)] [View PDF] | | | | | Grain refinement mechanism of V-5Cr-5Ti alloy based on equal channel angular pressing | | | Huang Shu-Ke | | | 2016,45(9):2313-2316 [Abstract(1401)] [View PDF] | | | | | Study on metal flow of 6061 aluminum alloy processed by Dual Equal Channel Extrusion | | | qihuarong | | | 2016,45(9):2317-2321 [Abstract(1221)] [View PDF] | | | | | Research on salt spray and electrochemical corrosion of FeCo-based bulk amorphous alloys | | | chen qing jun,jiang wei,zhang fa bi,dong ying hu and zhou xian liang | | | 2016,45(9):2322-2326 [Abstract(1377)] [View PDF] | | | | | Quantitative analysis on microstructure-tensile property relationship for Ti-6Al-4V alloy with basket weave structure | | | Shi Xiao Hui,Zeng Wei Dong,Sun Yu,Han Yuan Fei,Zhao Yong Qing and Guo Ping | | | 2016,45(9):2327-2331 [Abstract(1550)] [View PDF] | | | | | Thermodynamic Simulation Calculation of Co-8.8Al-9.8W alloy with different B content based on JMatPro software | | | xuyangtao and shaqizhen | | | 2016,45(9):2332-2336 [Abstract(1408)] [View PDF] | | | | | Effects of strain rates on mechanical properties and serrated flow behaviors of Zr67.76Cu11.94Ni8.30Al12 metallic glass compo | | | yaopei | | | 2016,45(9):2337-2341 [Abstract(1666)] [View PDF] | | | | | Research on the Fe-based alloy clad coatings reinforced by in situ synthesized ceramic phases containing titanium | | | Wang Gang | | | 2016,45(9):2342-2346 [Abstract(1694)] [View PDF] | | | | | Residual stresses of GH742 Superalloy induced by laser peening and shot peening | | | Gao Yukui | | | 2016,45(9):2347-2351 [Abstract(1997)] [View PDF] | | | | | Microstructure evolution and mechanical properties of the Ti/Ni multilayer composite produced by accumulative roll bonding | | | 2016,45(9):2352-2358 [Abstract(1299)] [View PDF] | | | |
材料工艺 | | | AN EXPERIMENTAL STUDY ON PERFORATION BEHAVIOR OF SEGMENTED WF/Zr-BASED BULK METALLIC GLASS MATRIX COMPOSITE | | | Du Zhonghua,Du Chengxin,Zhu Zhengwang and Xia Longxiang | | | 2016,45(9):2359-2365 [Abstract(1487)] [View PDF] | | | | | N-Containing Ternary Cu Alloy Films Stabilized by Ti | | | li xiao na,zhao li rong,zheng yue hong and dong chuang | | | 2016,45(9):2366-2372 [Abstract(1616)] [View PDF] | | | | | Influences of Melt Temperature on Microstructures and Properties of in-situ Al-18%Mg2Si composites | | | Chen Shuying,Shao Bingchun,Chen Zhilin and Chang Guowei | | | 2016,45(9):2373-2378 [Abstract(1147)] [View PDF] | | | | | Processing and mechanical property of the novel TiAl with high porosity | | | Hao Gangling,Wang Hui,Li Xianyu and Wang Weiguo | | | 2016,45(9):2379-2384 [Abstract(1217)] [View PDF] | | | | | Effect of compound physical Ultrasonic-Low Frequency Electromagnetic Casting Complex Field on Microstructures of Semi-Continuous Cast AZ61 Magnesium Alloy Billets | | | zhangzhiqiang | | | 2016,45(9):2385-2390 [Abstract(1311)] [View PDF] | | | | | Effects of Forging on Microstructure and Friction and Wear properties of in situ Al3Ti/6063Al composites | | | jiaolei | | | 2016,45(9):2391-2396 [Abstract(1337)] [View PDF] | | | | | Three-Dimensional Morphology of Primary Al3Zr Phase in Al-5Zr Master Alloy and Its Dependence on Pouring Temperature | | | lifei,zhuqingfeng,wangwenjing and cuijianzhong | | | 2016,45(9):2397-2402 [Abstract(1229)] [View PDF] | | | | | Effect of Carbon Addition on Tungsten Nano-powders Prepared by Hydrogen Reduction of Tungsten Oxide | | | Ye Nan and Tang Jiancheng | | | 2016,45(9):2403-2408 [Abstract(1182)] [View PDF] | | | | | Tensile properties and deformation mechanism of the Nb-16Si-10Ti-10Mo-5Hf in situ composite | | | lilaiping,yujiliang,zhangru,zhenxing,xiamingxing,caixiaomei,wangfeng and peiya | | | 2016,45(9):2409-2413 [Abstract(1242)] [View PDF] | | | | | Influence of PTFE on uniformity of Ni/Al composites fabrication with friction stir processing | | | Chengjian Wang,Chunping Huang,Chun Xia,Haijun Zhang,Liming Ke and Fencheng Liu | | | 2016,45(9):2414-2418 [Abstract(1380)] [View PDF] | | | | | Investigation on the Microstructure and Properties of AZ31B Magnesium Alloys Modified Layers by Laser Cladding Friction Stir Processing | | | LIU Fenjun,MENG Qingsen and LI Zengsheng | | | 2016,45(9):2419-2423 [Abstract(1194)] [View PDF] | | | | | Effect of WC Particles on The Microstructure and Properties of High Entropy Alloy SiFeCoCrTi Coating Synthesised by Laser Cla | | | anxulong | | | 2016,45(9):2424-2428 [Abstract(1652)] [View PDF] | | | | | Effect of deformation amount on the microhardness and element diffusion of the transition zone for Ti3Al/TC11 by laser solid | | | Liu Yingying | | | 2016,45(9):2429-2433 [Abstract(1271)] [View PDF] | | | | | Study on macrosegregation and Macrostructure of large scale Magnesium slab by LFEC process | | | huwenyi,leqichi,liuxuan,zhangzhiqiang,beolei and cuijianzhong | | | 2016,45(9):2434-2438 [Abstract(1488)] [View PDF] | | | | | Influence of positive-Ohm and anti-Ohm sections of gas discharge volt-ampere characteristic on microstructure and properties | | | haojuan | | | 2016,45(9):2439-2443 [Abstract(1654)] [View PDF] | | | | | Synthesis and Photocatalytic Property of TiO2/ Graphene-Fe3O4 Magnetic Ternary Composite Photocatalyst | | | wangruimeng and liuhui | | | 2016,45(9):2444-2448 [Abstract(1485)] [View PDF] | | | | | Effect of heat treatment on microstructure and mechanical properties of SiC matrix composites | | | Fang Kui,Ding Dehong and zhao shuang | | | 2016,45(9):2449-2453 [Abstract(1754)] [View PDF] | | | | | The Study of the Process of TC4-DT Alloy Resulting in Tri-modal Structure through Triple Heat Treatment | | | zhangguihua,donghongbo,zhushenliang and liucheng | | | 2016,45(9):2454-2457 [Abstract(1137)] [View PDF] | | | | | The effects of volt-ampere characteristics in positive-ohm and anti-ohm sections on coating uniformity | | | Feng lin,Jiang Bai Ling,Yang chao and Hao juan | | | 2016,45(9):2458-2461 [Abstract(1176)] [View PDF] | | | | | Inverstigation of Tb4O7-TiO2 Mixture Powders Prepared by High Energy Ball Milling | | | wang ke,Liu Tengjiao,Ran Guang,Lu Junqiang and Wang Lumin | | | 2016,45(9):2462-2465 [Abstract(1950)] [View PDF] | | | |
评述
|
