| |
Volume 49,Issue 9,2020 Table of Contents
材料科学 | | | Parametric investigation on Ti6Al4V single beads produced by electron beam freeform fabrication: Geometry, microstructure, composition and hardness | | | Xuewei Tao,Zhengjun Yao and Shasha Zhang | | | 2020,49(9):2913-2919 [Abstract(590)] [View PDF 15.12 M (942)] | | | | | Microstructure and mechanical properties of as-extruded and heat treated Mg-6Zn-1Mn-2Sn-0.5Ca | | | Chen Xia,Zhang Dingfei,Feng JingKai,Zhao Yang,Jiang Bin and Pan Fu Sheng | | | 2020,49(9):2920-2924 [Abstract(619)] [View PDF 4.90 M (713)] | | | | | Dissolution of g′ in a single crystal superalloy after high-cycle fatigue | | | Liu Yuan,Wang Linning,Yu Jinjiang and Sun Xiaofeng | | | 2020,49(9):2925-2929 [Abstract(585)] [View PDF 2.20 M (730)] | | | | | Study on Ultrasonic Vibration-assisted Stretching Process of TC4 Titanium Alloy Sheet under Thermal Conditions | | | GAO Tiejun | | | 2020,49(9):2930-2936 [Abstract(630)] [View PDF 2.33 M (709)] | | | | | Effect of CMAS on Interfacial Crack and Residual Stress of Thermal Barrier Coatings | | | Dun Guo,Qingmin Yu and Lv Cen | | | 2020,49(9):2937-2947 [Abstract(589)] [View PDF 1.39 M (726)] | | | | | Effect of Ce(SO4)2 Concentration on Properties of Ni-W-Ce Alloy Coating by Jet-Electrodeposition | | | FU Xiuqing,WANG Qingqing,LIN Jinran,SHEN Moqi and XU Ye | | | 2020,49(9):2948-2955 [Abstract(551)] [View PDF 1.85 M (599)] | | | | | Hot Deformation Behavior and Hot Processing Map of GH2907 Superalloy | | | chenyizhe,pangyuhua,wangjianguo,liudong and wangjianyan | | | 2020,49(9):2956-2965 [Abstract(669)] [View PDF 8.84 M (757)] | | | | | Microstructure simulation of ZL201 aluminum alloy auxiliary frame in solidification process | | | Chen Jun-yu,Qiu zhe-sheng,Li jia-qi and Yan Ji-kang | | | 2020,49(9):2966-2972 [Abstract(595)] [View PDF 1011.93 K (683)] | | | | | Hot compression behavior of Mg-5Y-0.5Ce-0.5Zr alloy | | | Zhang Qing,Zhu Limin and Li Quan-an | | | 2020,49(9):2973-2977 [Abstract(574)] [View PDF 1.17 M (647)] | | | | | The tribological and corrosive mechanism of Fe-based metallic glassy composite coatings sprayed by plasma spraying | | | Xingwei Zheng,Yuyun Zhou,Zhenhua Chu,Jingxiang Xu and Li Gao | | | 2020,49(9):2978-2982 [Abstract(555)] [View PDF 486.98 K (633)] | | | | | Microstructure Characteristics and Thermodynamic Calculation of Nickel-based Corrosion Resistant Hastelloy G3 Alloy | | | Zhenduo Zhao,Sha Li,Guangwei Fan and Jianchun Li | | | 2020,49(9):2983-2990 [Abstract(517)] [View PDF 1.45 M (621)] | | | | | Effect of target current of dual-stage HPPMS on the microstructure and corrosion resistance of TiN coatings | | | Hao Juan and JIANG Bailing | | | 2020,49(9):2991-2996 [Abstract(497)] [View PDF 795.88 K (598)] | | | | | Stress corrosion cracking and corrosion fatigue behaviors of micro-arc oxidized Mg-3Al-1Zn alloy | | | He Xiuli,Yan Zhifeng,Liang Hongyu,Bai Rui and She Yinzhu | | | 2020,49(9):2997-3004 [Abstract(589)] [View PDF 1.60 M (665)] | | | | | Microstructural evolution during water cooling after different processing conditions in Ti-6Al-4V alloy | | | Run-qi Zhang,Yi-qin Cai,Zhuang Li,Jin-yu Li,Qi Zhou and Xi-jun Cui | | | 2020,49(9):3005-3011 [Abstract(501)] [View PDF 2.38 M (731)] | | | | | Deformation Behaviors of Pure Tungsten during Equal Channel Double Angular Pressing | | | Ping Li,Zi-Hao Duan,Tao Wu,Ya-Ling Hua and Ke-Min Xue | | | 2020,49(9):3012-3020 [Abstract(559)] [View PDF 1.25 M (744)] | | | | | Thermodynamic Databases of Nd-Fe-B-Dy quaternary Alloy Systems and Alloy Design | | | wangcuiping,luyong,dengyuling,guoyihui,huangyixiong,chenmenghua,lizhou,liuxingjun and liuguozheng | | | 2020,49(9):3021-3029 [Abstract(769)] [View PDF 4.83 M (765)] | | | | | Novel method for insitu growth of carbonyl iron on the surface of hollow cenospheres and determination of itsmicrowave absorption properties | | | LIU Yuan,LI Rong,SHI Jinfeng and ZHANG Yi | | | 2020,49(9):3030-3034 [Abstract(559)] [View PDF 589.85 K (602)] | | | | | Steel fiber-reinforced nonferrous metal matrix composites: A review | | | Shuren Fu,Lijing Yang,Huan Li and Zhengxian Li | | | 2020,49(9):3035-3044 [Abstract(703)] [View PDF 1.19 M (713)] | | | | | High Temperature Deformation Behavior and Dynamic Recrystallization Mechanism of TB18 Titanium Alloy | | | Li Shaoqian,Hu Shengshuang,Gong Zhanpeng,Cui Linlin,Lei Jinwen,Wang Kaixuan,Ju Biao,Fan Yanjie and Fu Jie | | | 2020,49(9):3045-3051 [Abstract(1009)] [View PDF 1.03 M (734)] | | | | | Effects of La and Ag on Thermal Stability of Weldalite049 Alloy used forOil Drilling Rod | | | Wang Fuyue,Wang Xiangjie,Xuwen Hui and Cui Jianzhong | | | 2020,49(9):3052-3058 [Abstract(546)] [View PDF 1.09 M (639)] | | | | | Sinterability, Electrical Conductivity and Mechanical Property of YSZ Composite with Alumina or Aluminium Nitrate | | | Lei Ze,Wang Haoran,Jing Junmeng,Yang Zhibin and Peng Suping | | | 2020,49(9):3059-3064 [Abstract(583)] [View PDF 729.77 K (639)] | | | | | First-Principles Study on Mechanical Properties of B2-NiAl Intermetallic Compound Alloyed by Ce cooperation with Cr | | | CHEN Lü,LI Min and LIU Yi Zhong | | | 2020,49(9):3065-3070 [Abstract(516)] [View PDF 492.53 K (599)] | | | | | A Study Of High Temperature Steam Oxidation behavior of FeCrAl/ZrNbCu Dual Layer Tube Cladding | | | Bai Guanghai,Xue Fei,Liu Erwei,Zhang Yanwei,Geng Jianqiao,Shang Can,Dang Jianwei,Liu Xiangbin and Yu Weiwei | | | 2020,49(9):3071-3076 [Abstract(563)] [View PDF 6.19 M (695)] | | | | | Calculation and experimental study of radial high-temperature superconducting magnetic bearing | | | Zou Yincai,Shang Jin,Guan Xiang,Bian Xing,Wu Jihao and Li Qing | | | 2020,49(9):3077-3083 [Abstract(553)] [View PDF 780.08 K (603)] | | | | | Numerical simulation of crystal growth and Morphology of WO3 | | | liuqingsheng,chenghuajin,guohao and gaosuaitao | | | 2020,49(9):3084-3090 [Abstract(531)] [View PDF 1.45 M (622)] | | | | | Dynamic Recrystallization Behavior of AZ31 Magnesium Alloy Based on 3D CA | | | liwei,chuzhibing,wanghuanzhu,malifeng,liyugui,shuaimeirong,suhui and xuechun | | | 2020,49(9):3091-3098 [Abstract(509)] [View PDF 3.08 M (590)] | | | | | Preparation and Electrochemical Performance Improvement of Alkaline Earth Metal Ca Doped LNF Cathode | | | Manyi Xie,Changkun Cai,Shengli An,Jiangquan Gao and Ke Xue | | | 2020,49(9):3099-3106 [Abstract(540)] [View PDF 5.39 M (632)] | | | | | Flow stress characteristics and microstructure evolution during hot compression of Ti-62A alloy | | | Ding Kailun,Yang Xirong,Liu Xiaoyan and Yang Yuxin | | | 2020,49(9):3107-3114 [Abstract(532)] [View PDF 1.60 M (679)] | | | | | A MODIFIED DRUCKER-PRAGER/CAP MODEL FOR POWDER METALLURGY | | | Wang Chao,Xiao Lei,Zhang Gaoxiang and Guo Jianzheng | | | 2020,49(9):3115-3121 [Abstract(624)] [View PDF 957.00 K (562)] | | | |
材料工艺 | | | Microstructure and properties of laser deposition for single multilayer DZ125 two-stage aging heat treatment | | | bianhonhyou,zhaixingyue,wangshijie,liying,wangwei and wangwei | | | 2020,49(9):3122-3128 [Abstract(632)] [View PDF 2.47 M (664)] | | | | | Synthesis and Electrochemical Performance of Al2O3 Coated LiNi0.03Co0.05Mn1.92O4 as Cathode Material | | | Wang Shimin,Liu Honglei,Guo Junming,Xiang Mingwu,Su Changwei,Bai Hongli,Liu Xiaofang and Bai Wei | | | 2020,49(9):3129-3135 [Abstract(688)] [View PDF 1.07 M (620)] | | | | | Effect of Strain Ratio on Low Cycle Fatigue Behavior of Ultra-fine Grained Titanium | | | Xi-rong Yang,Yu-xin Yang,Xiao-yan Liu,Lei Luo,Kai-lun Ding,Man-Jiang Lei and Kui-jun Liu | | | 2020,49(9):3136-3142 [Abstract(579)] [View PDF 1.41 M (651)] | | | | | Microstructure and Microwave Attenuation Properties of Kanthal Coating Prepared by Selective Laser Melting | | | wang | | | 2020,49(9):3143-3152 [Abstract(481)] [View PDF 2.44 M (571)] | | | | | Effect of Heat Treatment on the Interfacial Microstrucrure of Ti/Ni Multi-layered Composites | | | Zhang Zhijuan,Zhang Bing and Zhang Shilin | | | 2020,49(9):3153-3162 [Abstract(546)] [View PDF 2.06 M (685)] | | | | | Preparation and Antibacterial Properties of Ta2O5 Nanorods Doped with Copper on Tantalum | | | Wang Cuicui,Li Xinyu,Tong Chenguang,Cai Anqi,Guo Hongwei and Yin Hairong | | | 2020,49(9):3163-3169 [Abstract(549)] [View PDF 2.00 M (636)] | | | | | Numerical and experimental investigation of the effect of height-width ratio of the sample on cyclic channel die compression process | | | SHI Fengjian,ZHANG Jianwei,WANG Leigang,SHAO Yong,GE Yanming,YE Sizhen and WANG Hao | | | 2020,49(9):3170-3176 [Abstract(564)] [View PDF 1.64 M (610)] | | | | | Mechanical design of the half-length prototype for a superconducting FECR ion source | | | zhuli,wuwei,sunliangting,yushurong,lichao and chenyuquan | | | 2020,49(9):3177-3181 [Abstract(542)] [View PDF 464.48 K (651)] | | | | | Microstructure and Crystal Orientation of nickel-based superalloy GH3536 by Selective selective laser melting | | | 宗学文 | | | 2020,49(9):3182-3188 [Abstract(593)] [View PDF 13.28 M (821)] | | | | | Effect of Holding Time on Microstructure and Mechanical Properties of TiAl based Alloy | | | Zhang Runchen,Chen Qingjun,Gao Jiwen,Cui Xia,Xu Yong,Feng Aihan and Qu Shoujiang | | | 2020,49(9):3189-3194 [Abstract(603)] [View PDF 1002.78 K (640)] | | | | | Study on the self-lubricating MoS2-TiO2 coating on TC4 surface by micro-arc oxidation | | | Zehui Yang,Nan Wang,Yongnan Chen,Long Zhang,Hong Chen,Jianmin Hao,Yongqing Zhao,Chenxing Shi and Wenlong Shi | | | 2020,49(9):3195-3202 [Abstract(525)] [View PDF 1.64 M (613)] | | | | | Size effects and compression properties of metallic foams with lateral constraint | | | 李志斌,李雪艳 | | | 2020,49(9):3203-3208 [Abstract(459)] [View PDF 688.01 K (610)] | | | | | Microstructures and Mechanical Properties of Ni-(50-x)Al-xSc Alloys solidified in water-cooled copper mold | | | Lei Mingke,Guo Xuefeng,Wu Yali,Cui Hongbao and Yu Heshuai | | | 2020,49(9):3209-3217 [Abstract(551)] [View PDF 1.62 M (579)] | | | | | The investigation of Ti-Ni Pre-alloyed Powder Used for Electron Beam Melting | | | Ren Dechun,Zhang Huibo,Li Shujun,Hou Wentao,Wang Jian,Jin Wei and Yang Rui | | | 2020,49(9):3218-3224 [Abstract(540)] [View PDF 2.25 M (602)] | | | | | Study on Oxidation behavior of FeAlMoCrC and FeAlNiMoCrC Coatings at 700 ℃ | | | Jiang Xudong,Zhou Zhiwen,Xu Zhengbing,Chen Xiaoyang,Wei Deman and Zeng Jianmin | | | 2020,49(9):3225-3234 [Abstract(575)] [View PDF 7.90 M (734)] | | | | | Study on the Low Cycle Fatigue Properties of an FGH97 P/M Superalloy with different test control modes | | | Yang Jinlong,Zhu Xiaomin,Chen Qi,Qiu Chuanrong and Guo Jianzheng | | | 2020,49(9):3235-3243 [Abstract(595)] [View PDF 1.44 M (613)] | | | | | Study on High Temperature Creep Forming Process of TC4 Titanium Lotus Seedpod-like Core | | | Wang Wensen,Li Xiaohong,Deng Yunhua and Yue Xishan | | | 2020,49(9):3244-3250 [Abstract(523)] [View PDF 2.12 M (566)] | | | | | Effect of cold rolling pre-deformation on microstructure andproperties of a new Aluminum lithium alloy | | | Wu Mingdong,Xiao Daihong,Chen Weibing,Huang Jin,Huang Lanping and Liu Wensheng | | | 2020,49(9):3251-3259 [Abstract(639)] [View PDF 1.60 M (615)] | | | | | Effect of Heat Treatment on Thermal Stability of Microstructure and Mechanical Properties of High Pressure Solidified Al2O3/Al-10Si | | | Zhu Dongdong,Chen Zhipeng,Wang Gang,Dong Duo,Wang Xiaohong and Zhang Yanheng | | | 2020,49(9):3260-3264 [Abstract(461)] [View PDF 805.72 K (593)] | | | | | Effect of rolling speed on cold rolling forming of AZ31 magnesium alloy tubes | | | Chu zhi bing,su hui,li wei,xue chun,li yu gui and ma li feng | | | 2020,49(9):3265-3272 [Abstract(564)] [View PDF 1.67 M (627)] | | | |
评述
|
