| |
Volume 50,Issue 10,2021 Table of ContentsDownload Contents
材料科学 | | | Influence of Hot Corrosion on Precipitation of δ Phase and Tensile Properties of GH4169 Superalloy | | | Song Xiaoxiao,Zhou Lv,Li Ke,Ren Kaixu,Wang Jiayu and Wang Xin | | | Published October 25, 2021 (10 pages) | | | 2021,50(10):3427-3436 [Abstract(751)] [View PDF 22.43 M (1038)] | | | | | Cellular Automata Based Microstructure Prediction in Accu-mulative Roll-Bonding of TA15 Sheets | | | Han Dong,Zhao Yongqing,Zeng Weidong,Li Lei and Zhang Yongqiang | | | Published October 25, 2021 (9 pages) | | | 2021,50(10):3437-3445 [Abstract(563)] [View PDF 8.88 M (669)] | | | | | Tension-Compression Asymmetry and Microstructure of Extruded AZ31 Magnesium Alloy | | | Su Hui,Chu Zhibing,Xue Chun,Li Yugui and Ma Lifeng | | | Published October 25, 2021 (8 pages) | | | 2021,50(10):3446-3453 [Abstract(660)] [View PDF 22.01 M (932)] | | | | | Influence of Friction Stir Processing with the Same Speed Ratio on Microstructure Evolution, Mechanical Properties and Corrosion Performances of Stirred Zone in Al-Mg-Si Alloy | | | Sun Zhiyong,Liu Fenjun and Chen Haiyan | | | Published October 25, 2021 (8 pages) | | | 2021,50(10):3454-3461 [Abstract(530)] [View PDF 28.15 M (889)] | | | | | Effect of Shot Peening Pretreatment on Low Temperature Plasma Nitriding of Ti6Al4V Alloy | | | Liu Zhen,Yu Shouming,Liu Daoxin,Shi Hailan and He Guangyu | | | Published October 25, 2021 (8 pages) | | | 2021,50(10):3462-3469 [Abstract(498)] [View PDF 4.43 M (639)] | | | | | Existence Form and Distribution of Mn and the Effect of Mn Content on High-Temperature Stress Rupture Proper-ties of K417G Superalloy | | | Yang Yaqian,Xing Weiwei,Chen Weiliang,Chen Bo,Ma Yingche and Liu Kui | | | Published October 25, 2021 (7 pages) | | | 2021,50(10):3470-3476 [Abstract(493)] [View PDF 19.40 M (892)] | | | | | Effects of Er on the Microstructure and Eutectic Phase Morphology of Directionally Solidified Al-Zn-Mg-Cu-Zr Alloys | | | Yuan Shuai,Jia Lina and Zhang Hu | | | Published October 25, 2021 (8 pages) | | | 2021,50(10):3477-3484 [Abstract(426)] [View PDF 2.61 M (583)] | | | | | Effect of Morphology of Amorphous TiO2 Nanotube on Its Electrochemical Performance as Supercapacitors | | | Song Zhiyuan,Li Xianrong,Zhuang Changwan,Wei Aili,Zhang Wanggang and Liu Yi-ming | | | Published October 25, 2021 (10 pages) | | | 2021,50(10):3485-3494 [Abstract(444)] [View PDF 14.67 M (702)] | | | | | Deformation Failure of Regular Porous Titanium with Diffe-rent Porosities | | | Ren Huilan,Shen Haiting and Ning Jianguo | | | Published October 25, 2021 (9 pages) | | | 2021,50(10):3495-3503 [Abstract(436)] [View PDF 10.32 M (715)] | | | | | Effect of Cold Rolling on the Microstructure and Mechani-cal Properties of Pure Nickel N6 | | | Jia Zhi,Sun Xuan,Ji Jinjin,Wang Yanjiang,Wei Baolin and Yu Lidan | | | Published October 25, 2021 (8 pages) | | | 2021,50(10):3504-3511 [Abstract(509)] [View PDF 7.18 M (628)] | | | | | Novel Synthesis of Multistage Porous Ni-P Particles Through Cu-Ni-P Alloys | | | Zuo Min,Li Yongli,Xia Wenli,Zhao Degang and Wang Yan | | | Published October 25, 2021 (8 pages) | | | 2021,50(10):3512-3519 [Abstract(471)] [View PDF 7.40 M (648)] | | | | | Effect of Surface Coating on Porous Mg Scaffolds for Bone Engineering | | | Lin Tao,Jin Liuping,Li Wenyuan,Shao Huiping,Yuan Jiayun and Deng Xin | | | Published October 25, 2021 (7 pages) | | | 2021,50(10):3520-3526 [Abstract(399)] [View PDF 3.25 M (635)] | | | | | Properties of Cu-P Brazing Filler Metal After Hot-Dip Tinning | | | Dong Bowen,Zhong Sujuan,Pei Yinyin,Shen Yuanxun and Long Weimin | | | Published October 25, 2021 (5 pages) | | | 2021,50(10):3527-3531 [Abstract(528)] [View PDF 2.40 M (700)] | | | | | Effects of Stacking Fault Energy and Temperature on Creep Performance of Ni-based Alloy with Different Co Contents | | | Tian Chenggang,Tao Xipeng,Xu Ling,Cui Chuanyong and Sun Xiaofeng | | | Published October 25, 2021 (6 pages) | | | 2021,50(10):3532-3537 [Abstract(532)] [View PDF 2.19 M (581)] | | | | | Microstructure Evolution and Deformation Behavior of Gold Cladding Silver Composite Bonding Wire | | | Kang Feifei,Pei Hongying,Zhou Wenyan,Luo Jianqiang,Wu Yongjin,Jianshu Yu and Wang Jia | | | Published October 25, 2021 (5 pages) | | | 2021,50(10):3538-3542 [Abstract(416)] [View PDF 5.44 M (618)] | | | | | Additive Manufactured Ti-6Al-4V Alloy with Graded Micro-structure by Selective Laser Melting | | | Liu Shichao,Lei Pengfei,Liu Min,Zhang Gengming,Chen Chao and Zhou Kechao | | | Published October 25, 2021 (7 pages) | | | 2021,50(10):3543-3549 [Abstract(580)] [View PDF 18.49 M (831)] | | | | | Evolution law of directional solidification structure of Nb42Ti21Co37 ternary quasiperitectic alloy | | | Wang Jinhua,闫二虎,Di Chongbo,Chen Yuncan,Liu Wei,Wang Hao,Ge Xiaoyu,Cheng Jian,Huang Renjun and Sun Lixian | | | 2021,50(10):3577-3584 [Abstract(629)] [View PDF 1.26 M (728)] | | | | | Effect of rolling process on texture evolution, microstructure and mechanical properties of TC4 alloy plate | | | Han Ying,Yu Wei,Dong Entao and Cheng Zhisong | | | 2021,50(10):3585-3590 [Abstract(827)] [View PDF 864.62 K (940)] | | | | | Deformation analysis of crystal plasticity and texture prediction of Zr-4 alloy during cold rolling process | | | Huan Liu,Siying Deng,Hongwu Song,Shihong Zhang and Wenbin Guo | | | 2021,50(10):3591-3599 [Abstract(651)] [View PDF 1.74 M (754)] | | | | | Simulation of texture formation in hot forged TC18 titanium bars | | | chenliquan,yangping,lizhishang,guxinfu,yanmengqi and shaaixue | | | 2021,50(10):3600-3608 [Abstract(643)] [View PDF 1.19 M (711)] | | | | | (28)A Double Multiple Nonlinear Regression Constitutive Equation for Prediction of High Temperature Flow Behavior of TC4 titanium alloy fabricated by electron beam cold hearth melting | | | WANG Wei,WANG Meng,CAI Jun,ZHANG Haoze,SHI Yaming,ZHANG Xiaofeng,HUANG Haiguang and WANG Kuaishe | | | 2021,50(10):3609-3620 [Abstract(554)] [View PDF 1.57 M (776)] | | | |
材料工艺 | | | Study on the self-sealing pore effect of graphene-oxide on GO/TiO2 coating | | | Yongnan Chen,Ziwei Guo,Zehui Yang,Qinyang Zhao,Long Zhang,Yiku Xu,Jianmin Hao,Haifei Zhan and Yongqing Zhao | | | 2021,50(10):3621-3626 [Abstract(583)] [View PDF 651.68 K (703)] | | | | | Synthesis of CC/PANI/TiO2 composite material and its photocatalytic performance | | | Chen Fenghua,Shi Xiangdong,Liang Weiwei,Yang Maosen,Chen Qingtao,Jiang Liying and Zhang yonghui | | | 2021,50(10):3627-3633 [Abstract(624)] [View PDF 760.11 K (711)] | | | | | Effect of liquid phase on the spark plasma sintering process of ZnO ceramic | | | Zhang Jiexin,Kang Shenglin,Zhao Xuetong,Sun Jianjie,Liang Jie,Chen Han,Yang Lijun and Liao Ruijin | | | 2021,50(10):3634-3639 [Abstract(613)] [View PDF 1.26 M (756)] | | | | | Effect of Si Addition on Hot Corrosion Behavior of AlCoCrFeNi High Entropy Alloys | | | Zhang Ping,Li Yuantian,Zhang Jinyong,Chen Zheng,Fan Yu and Shen Baolong | | | 2021,50(10):3640-3647 [Abstract(579)] [View PDF 1.04 M (668)] | | | | | The characteristics of Ni-based superalloy powders used for the gradient integral turbine blisk by the hyper-transient solidified additive manufacturing I: disk alloy powders | | | Zheng Liang,Liu Zhaoyang,Zhu Qiang,Song Lijun,Li Zhou and Zhang Guoqing | | | 2021,50(10):3648-3656 [Abstract(663)] [View PDF 879.45 K (743)] | | | | | Microstructure and properties of SiCp/6061-T6Al MMCs low-power laser-TIG hybrid welding based on Ti intermediate layer | | | Ba Xianli,Gao Zeng,Wang Zhenjiang,Qiu Dechao,Niu Jitai and Qiu Yujie | | | 2021,50(10):3657-3663 [Abstract(634)] [View PDF 905.64 K (638)] | | | | | Microstructure characteristics of adiabatic shear band in a typical near α-type Ti alloy | | | Hao Fang,Du Yuxuan,Mao Youchua,Chen Jun,Xin Shewei,Chen Haisheng,Wang Kaixuan,Liu Xianghong and Feng Yong | | | 2021,50(10):3664-3669 [Abstract(624)] [View PDF 1.02 M (755)] | | | | | Dealloying preparation of nano-sheet arrays and nano-spherical particles of porous tin | | | zhao xu,liang dan ying,song guo dong,wang yan mou and zhang cong hui | | | 2021,50(10):3670-3676 [Abstract(617)] [View PDF 1.38 M (780)] | | | | | Oxidation Behaviors of a Zr-Sn-Nb Alloy in 1000~1250℃ Steam | | | ZHANG Feng,ZHANG Chengyu,ZHAO Wanqian,ZHANG Yao,CHEN Le,LI Mei and SONG Pengcheng | | | 2021,50(10):3677-3683 [Abstract(598)] [View PDF 1.56 M (727)] | | | | | Micro-porosity and Tensile Property of High Density Inconel 718 Superalloy Fabricated by Selective Laser Melting | | | Fencheng Liu,Wenwei Hu,Jiongyu Jia,Fenggang Liu,Yang Xu and Zhitai Wang | | | 2021,50(10):3684-3692 [Abstract(731)] [View PDF 1.35 M (689)] | | | | | Effect of sintering temperature on properties of porous Inconel 625 alloy | | | Wang Hao,Jing Peng and Li Guangzhong | | | 2021,50(10):3693-3697 [Abstract(474)] [View PDF 721.70 K (670)] | | | | | Corrosion resistance and fracture repair ability of magnesium-calcium alloy with hydroxyapatite/graphene oxide/magnesium hydroxide composite coating | | | Chen Hewei,Yuan Bo,Wang Linnan,Yang Xi,Zhu Xiang Dong,Song Yueming and Zhang Xingdong | | | 2021,50(10):3698-3706 [Abstract(532)] [View PDF 1.43 M (891)] | | | | | Microstructure and Mechanical Properties of CrFeMnVCu High Entropy Alloys | | | song ruokang and Zhang Lin | | | 2021,50(10):3707-3713 [Abstract(572)] [View PDF 1.29 M (729)] | | | | | Study on Surface Strengthening of Tungsten Plasma Facing Material by Shot Peening | | | Ji Suyan,Chong Fali,Liao Kai and Chen Jiawei | | | 2021,50(10):3714-3719 [Abstract(514)] [View PDF 948.22 K (649)] | | | | | Brazing of CuAgZr alloy Using Ag-Cu-Zn-Mn Braze Filler: Studies on Microstructure and Properties Aspects | | | Lei Rui Chao,Cao Qi Gao,Zheng Jing,Wang Rui Hong and Wang Guo Yao | | | 2021,50(10):3720-3728 [Abstract(570)] [View PDF 1.33 M (702)] | | | | | Effects of sintering process and hot extrusion on Microstructure and properties of Nano-Al2O3 / 7075 Aluminum Matrix Composites | | | Yan Qinghua,Xu Zhikai and Lu Dehong | | | 2021,50(10):3729-3738 [Abstract(566)] [View PDF 2.28 M (685)] | | | | | Controllable and Large-scale Preparation of High-purity Nanosilicon and Electrochemical Performance | | | ZHANG Dian-ping,LI Jin,SU Shao-peng and LI Yang | | | 2021,50(10):3739-3744 [Abstract(529)] [View PDF 898.14 K (688)] | | | | | Preparation and mechanical properties of continuous Cf / Al composite plate by twin-roll casting | | | Lin Jinbao,Gong Yi,Mu Weipeng,Xu Peng and Liu Erqiang | | | 2021,50(10):3745-3750 [Abstract(553)] [View PDF 1.17 M (657)] | | | | | Effect of Ni–xCr binders on microstructure and mechanical properties of Ti(C,N)-based cermets | | | Yang Qingqing and Xiong Weihao | | | 2021,50(10):3751-3756 [Abstract(542)] [View PDF 692.80 K (660)] | | | | | Influence of Lithium Sources on the Lithium ion Storage Performance of NCM811 Cathode Materials Prepared by High-Temperature Solid-State Reaction Method | | | Lu Zhigang,Li Yanwei,Jiang Jiqiong,Li Wei and Yao Jinhuan | | | 2021,50(10):3757-3764 [Abstract(633)] [View PDF 3.31 M (714)] | | | | | Influence of (Al+Cu) content on grain boundary diffusion in Nd-Fe-B sintered magnet | | | Tao Liu,Jian Li,Jie Chen,Xin Zhang,Xinghua Cheng,Lei Zhou and Xiaojun Yu | | | 2021,50(10):3765-3770 [Abstract(670)] [View PDF 650.64 K (765)] | | | | | Analysis of Typical Welding Defects of Titanium Alloy Linear Friction Welding Joint | | | Chang Chuanchuan,Li Ju and Li Xiaohong | | | 2021,50(10):3771-3776 [Abstract(573)] [View PDF 1.36 M (670)] | | | |
评述 | | | Control of Al and Ti Contents During Electroslag Remelting of High-Temperature Ni-based Alloys | | | Ju Jiantao,Zhu Zhihong,Yang Kangshuai,Ji Guangheng,An Jialiang and Shi Cheng- bin | | | Published October 25, 2021 (12 pages) | | | 2021,50(10):3550-3561 [Abstract(616)] [View PDF 9.88 M (701)] | | | | | Gradient Nanostructured Materials Induced by Ultrasonic Surface Rolling Process | | | Chen Daoming,Liu Jingyuan,Chen Dehua,Su Bin and Liu Kezhao | | | Published October 25, 2021 (15 pages) | | | 2021,50(10):3562-3576 [Abstract(462)] [View PDF 3.64 M (701)] | | | | | Research status of intelligent temperature sensitive coatings based on fluorescence characteristics of rare earth ions | | | TIAN Haoliang,WANG Hao,JIN Guo,ZHANG Baosen,WANG Changliang,GUO Mengqiu,DU Xiuxin,Wang Tianying,ZHANG Ang and XIAO Chenbing | | | 2021,50(10):3777-3785 [Abstract(617)] [View PDF 853.93 K (806)] | | | | | Progress research of mechanical metamaterials | | | zhuqing,zhanghaijun,hanlei,zhangjialian,donglonghao and lisaisai | | | 2021,50(10):3786-3796 [Abstract(647)] [View PDF 1.51 M (890)] | | | | | Research Progress of Powder Hot Isostatic Pressing for Intermetallic Titanium Aluminide | | | wangxiangning,zhulangping,yuwen,dingxianfei and nanhai | | | 2021,50(10):3797-3808 [Abstract(733)] [View PDF 1.13 M (864)] | | | |
研究快报 | | | Preparation of metal tellurium nanowires by thermal evaporation | | | Xie Tian,Zhang Huimin,Li Jianhui,Wang Liting and Yang Chunjun | | | 2021,50(10):3809-3813 [Abstract(677)] [View PDF 626.96 K (633)] | | | | | Trial Manufacturing of Ni-base rotor forging for 700 ℃ advanced USC powder plant | | | nieyihong,baiyaguan,koujinfeng,guowei,zhangxin,caozhiyuan and wangbaozhong | | | 2021,50(10):3814-3818 [Abstract(803)] [View PDF 924.52 K (729)] | | | |
|
