| |
Volume 50,Issue 2,2021 Table of Contents
钛合金 | | | Study on rigid restraint thermal self-compressing bonding of Ti6Al4V alloy by local induction heating | | | Pan Rui,Deng Yunhua and Zhang Hua | | | 2021,50(2):373-379 [Abstract(1111)] [View PDF 1.53 M (963)] | | | | | Microstructure and Flame-resistant Properties of Ti-xV-15Cr (x = 20,25,30,35) Alloys by Laser Solid Forming | | | Zhang Fengying,Wang Gang,Liu Tong,Wang Kun,Kang Chennuo,Peng Yijie,Li Yao,Tan Hua and Chen Yongnan | | | 2021,50(2):380-388 [Abstract(885)] [View PDF 2.47 M (835)] | | | | | In-situ investigation on deuterium induced cracking of titanium | | | Xiaoqiu Ye,Yao Xiao,Jiliang Wu,Ruizhu Yang,Xuefeng Wang and Deli Luo | | | 2021,50(2):389-395 [Abstract(908)] [View PDF 1.25 M (722)] | | | | | Study on material removal mechanism of single crystal γ- TiAl Alloy by double abrasive micro cutting | | | Li Junye,Xie Hongcai,Zhang Xinming,Zhao Weihong,Shi Guangfeng and Xu Chengyu | | | 2021,50(2):396-407 [Abstract(852)] [View PDF 6.73 M (812)] | | | | | Effect of Process Parameters Settings and Thickness on Microstructures of EBM Produced Ti-6Al-4V | | | huaizhi he,Adnan. Safdar and Liu-Ying Wei | | | 2021,50(2):408-415 [Abstract(662)] [View PDF 4.61 M (779)] | | | | | Correction of the flow curve of Ti60 alloy considering effectsof friction and heating | | | Wang Tianxiang,Lu Shiqiang,Wang Kelu,Ouyang Delai and Yao Quan | | | 2021,50(2):537-543 [Abstract(650)] [View PDF 1.41 M (834)] | | | | | High Temperature Oxidation Behavior and Failure Mechanisms of Silicide Diffusion Coating Deposited on TC4 Alloy | | | Hunag Bo,Li Xuan,Xie Xiaoqing,Lai Sheng,Tian Jin,Tian Wei and Liu Zhongbin | | | 2021,50(2):544-551 [Abstract(748)] [View PDF 5.77 M (741)] | | | | | Effect of Heat Treatment on Microstructures and Properties of Ti90 Alloy | | | 王可,Zhao Yongqing,Jia Weiju,Hou Zhimin,Li Silan and Mao Chengliang | | | 2021,50(2):552-561 [Abstract(919)] [View PDF 8.49 M (1129)] | | | | | Research on Reloading Mechanical Behavior of Ti6321 Titanium Alloy | | | Zhou Zhe,Wang Lin,Cheng Xingwang,Cheng Huanwu,Xu XUefeng,Tayyeb Ali,Liu Anjin,Ning Zixuan,Xu Linyu,Zhang Binbin and Cai Hongnian | | | 2021,50(2):562-567 [Abstract(819)] [View PDF 2.05 M (697)] | | | | | Effect of hydrogenated treatment on high-temperature deformation behavior of as-cast TiZrAlV alloy | | | Tang Min,Chen Lijun,Wang Xuan,Luan Baifeng and Liu Qing | | | 2021,50(2):568-574 [Abstract(712)] [View PDF 2.85 M (747)] | | | | | Influence of Casting Process on the Structure and Mechanical Properties of as-cast Ti5Al2.5Sn ELI Titanium Alloy | | | Liu Shibing,Lou Yanchun,Zhao Jun,Li Chongyang,Liu Hongyu and Zhang Aibo | | | 2021,50(2):575-580 [Abstract(814)] [View PDF 6.62 M (781)] | | | | | Morphology and crystal phase control of piezoelectric BaTiO3 coating on titanium surface | | | zhengyafei,zhangxinyuan,wangjing,zhangwei,liulipeng,anweikang,jiaohua and machufan | | | 2021,50(2):581-587 [Abstract(691)] [View PDF 68.80 M (1266)] | | | | | Study on Low Cycle Fatigue Behavior of Ti-3Al-5Mo-4Cr-2Zr-1Fe Alloy with High Strength and Toughness | | | Zhang Hang,Sun Yangyang,Igor. V. Alexandrov,Fang Zhigang,Yi Chengjie,Dong Yuecheng,Chang Hui and Zhou Lian | | | 2021,50(2):588-594 [Abstract(899)] [View PDF 1.97 M (748)] | | | | | Research Progress of Grain Boundary Migration and its in-situ Study on TiAl alloys | | | yangjieren,zhangliteng,gaozitong and hurui | | | 2021,50(2):699-708 [Abstract(647)] [View PDF 8.37 M (758)] | | | | | Progress and Challenge of 3D Printing Titanium and Titanium Alloys | | | Wang Haojie,Yang Fang,Guo Zhimeng and Shao Yanru | | | 2021,50(2):709-716 [Abstract(808)] [View PDF 1.11 M (852)] | | | | | Composition design, deformation mechanism and mechanical properties of metastable β titanium alloy | | | Zhang Chongle,Bao Xiangyun,Zhang Jinyu,Liu Gang and Sun Jun | | | 2021,50(2):717-724 [Abstract(720)] [View PDF 1.91 M (774)] | | | |
材料科学 | | | The influences of shear angles on the bimodal grain sizesand compression properties of AZ31 Mg alloy | | | huhongjun | | | 2021,50(2):416-424 [Abstract(734)] [View PDF 5.88 M (821)] | | | | | Large FeSe single crystal growth and its superconducting property | | | Yujia Huang,Yan Xing,Wei Pan and Chunlei Wan | | | 2021,50(2):425-429 [Abstract(873)] [View PDF 1.90 M (840)] | | | | | Electrochemical Mechanism and Plating Characteristics for Surfactants -assisted Preparation of Cu-Ti3SiC2 Coated Powders | | | Yaru Cui,Guohua Wang,Xiaoming Li,Juan Wang,Qiangqiang Yang and Huan Liu | | | 2021,50(2):430-436 [Abstract(783)] [View PDF 1.28 M (749)] | | | | | Electromagnetic and microwave absorption properties of flake Nd1Ni5-xCx | | | Jing-jing Yu,Shun-kang Pan,Li-chun Cheng,Yong-he Liu and Lei Huang | | | 2021,50(2):437-442 [Abstract(619)] [View PDF 1.01 M (693)] | | | | | Effect of Excess Fe2O3 in Reactions on Microstructure and Tensile Properties of Micro-nano Structure 316L Austenitic Stainless Steels Prepared by Aluminothermic Method | | | Jiao Wang,Yuehong Zheng,Ying Wei,Peiqing La,Miwen Yuan and Yu Shi | | | 2021,50(2):443-450 [Abstract(797)] [View PDF 8.06 M (832)] | | | | | Preparation and Property of La, Nd, Bi Co-doped TiO2 Electrochromic Film | | | XU ZiFang,JIANG Yujie,GUI Chan and MA Jun | | | 2021,50(2):451-457 [Abstract(701)] [View PDF 5.30 M (768)] | | | | | The effect of hydrogen on the very high cycle fatigue properties of quenched and tempered martensitic steels containing (Ti,Mo)C precipitates | | | jinxiaokun,xule,yuwenchao,yaokefu,shijie and wangmaoqiu | | | 2021,50(2):458-468 [Abstract(706)] [View PDF 2.76 M (714)] | | | | | Research on non-contact impact damage location based on HHT | | | Wang Ziping,Fei Yue,QIan Lei and Sun Si | | | 2021,50(2):469-474 [Abstract(660)] [View PDF 610.78 K (759)] | | | | | Effect of Neodymium Addition on the Plate-type V2O5-MoO3/TiO2 Catalyst for Selective Catalytic Reduction of NO | | | Huang Li,Zong Yuhao,Wang Hu,Chang Zhengfeng,Zhang Shule and Zhong Qin | | | 2021,50(2):475-482 [Abstract(731)] [View PDF 583.05 K (717)] | | | | | Band structures, half-metallicity and magnetic propertiesin Cr2VZ (Z = P, As) full-Heusler alloys | | | Wu Xiaojuan,Fan Xiaolan,Wang Sa,Hong Xin,Xie Jinfeng,Gaoya,Xu Qiaohao and Feng Wenjiang | | | 2021,50(2):483-487 [Abstract(655)] [View PDF 462.35 K (676)] | | | | | Microstructure and mechanical properties of as-aged Mg-Gd-Zn-Zr-Ag alloy with different contents of Al and Li | | | Tu Teng,Chen Xianhua,Zhang Lijuan,Zhao Chaoyue,Luo Zhu,Dai Yan and Pan Fusheng | | | 2021,50(2):488-496 [Abstract(676)] [View PDF 4.45 M (737)] | | | | | Fabrication and pore structure of directionally solidified porous Mg-Zn alloy | | | xiao xinxiong,liu yuan,jin qinglin,zhou canxu,zhang huawei,li yanxiang and li zaijiu | | | 2021,50(2):497-503 [Abstract(704)] [View PDF 16.75 M (877)] | | | | | Dynamic Recrystallization Model Of Ultrafine grained Pure Zirconium Refined by Compounding | | | Han Peisheng,Ma Weijie,Li Yanwei,Zhu Xiaoyu,Yang Xirong and Wang Xiaogang | | | 2021,50(2):504-510 [Abstract(666)] [View PDF 3.25 M (721)] | | | | | Electromechanical properties study on lapped joints of Y0.5Gd0.5Ba2Cu3O7-z coated conductors joining with lead-free solders | | | Gansong Yang,Wentao Wang,Lian Liu,Mingjiang Wang,Zhengjian Tian,Qiutong Zheng and Yong Zhao | | | 2021,50(2):511-518 [Abstract(760)] [View PDF 5.18 M (776)] | | | | | Flow and Heat Transfer Characteristics and Collaborative Optimization of Cooling roller for Preparing Amorphous Ribbons | | | liyongkang | | | 2021,50(2):519-524 [Abstract(705)] [View PDF 1.02 M (709)] | | | | | Hot deformation behavior and strain compensation physical constitutive model of Zr-4 alloy | | | FENG Rui,WANG Kelu,LU Shiqiang,LI Xin,ZHOU Xuan and ZHONG Mingjun | | | 2021,50(2):525-530 [Abstract(686)] [View PDF 1.02 M (859)] | | | | | Creep Data Prediction for Type 316H Stainless Steel Served in Nuclear Power Plant | | | Li Ang,Wu Fu,Gao Wei and Zhang Yi | | | 2021,50(2):531-536 [Abstract(741)] [View PDF 653.33 K (808)] | | | |
材料工艺 | | | Effect of cooling rates on the magnetic and corrosion resistance properties of FeCuNbSiB alloys | | | MA HAIJIAN,AN BANG,WEI WENQING,SHEN XIANGBO,BAO WENKE and WANG WEIMIN | | | 2021,50(2):595-599 [Abstract(634)] [View PDF 1.35 M (699)] | | | | | Study on formation mechanism, microstructure and corrosion resistance of Fe-Cr-Mn-based ultra-fine grain austenitic stainless steel | | | Chongfeng Sun,Xiaofeng Dang,Shengqi Xi,Jianping Li,Yuan Gao,Yongchun Guo,Zhong Yang and Yaping Bai | | | 2021,50(2):600-606 [Abstract(663)] [View PDF 3.04 M (706)] | | | | | Effect of Recrystallization Annealing on Microstructure, Texture and Properties of Mg-1.5Y Alloy Sheet | | | Wang Yinyang,Wang Rong,Fang Canfeng and Xu ZunYan | | | 2021,50(2):607-613 [Abstract(552)] [View PDF 20.09 M (861)] | | | | | Study on Photoelectrochemical Performance of Modified TiO2 Nanotube Array Electrode | | | jinyuxin,shiyingzhe and wangxuan | | | 2021,50(2):614-620 [Abstract(614)] [View PDF 9.06 M (754)] | | | | | Effects of Cu and Sb Addition on Properties of Sn-Bi Eutectic Alloys | | | Yang Tianqi,Zhao Xiuchen,Cheng Jingwei,Tan Chengwen,Yu Xiaodong and Liu Yingxia | | | 2021,50(2):621-626 [Abstract(616)] [View PDF 2.15 M (666)] | | | | | Exothermic Properties and Damage Effects of MultilayeredAl/Ni Energetic Structural Materials | | | Wang Mingzhi,Wang Chuanting,He Yong and Tao Jie | | | 2021,50(2):627-632 [Abstract(647)] [View PDF 1.40 M (661)] | | | | | Effect of Al Content on Microstructure and Mechanical Properties of as-cast V-xAl Alloy for Hydrogen Separation Membrane | | | Sun Bolin,Jiang Peng,Peng Guosheng,Shi Xiaobin and Song Guangsheng | | | 2021,50(2):633-638 [Abstract(641)] [View PDF 1.51 M (686)] | | | | | Microstructure evolution of AZ80 magnesium alloy under different states | | | Li Zhenliang and Tian Dongkuo | | | 2021,50(2):639-647 [Abstract(750)] [View PDF 10.52 M (1145)] | | | | | Effect of building direction on the behavior of laser powder bed fused tungsten under high heat load | | | Li Kailun,Chen Jinhan,Zhao Congcong,Xing Leilei,Wang Jianbao,Chen Zhe,Lian Youyun,Feng Fan,Liu Xiang,Liu Wei and Shen Zhijian | | | 2021,50(2):648-653 [Abstract(781)] [View PDF 2.95 M (701)] | | | | | Synthesis, characterization and transport properties of superconducting FeSe0.36S0.64 single crystal | | | qinlingyao | | | 2021,50(2):654-657 [Abstract(538)] [View PDF 1.30 M (725)] | | | | | Growth and crystal structure evolution of copper precipitate | | | Yin Hongxiang,Wu Yi,Zhang Guanzhen,Li Xiang,Zhang Pengpai and Zhao Aimin | | | 2021,50(2):658-663 [Abstract(647)] [View PDF 5.44 M (671)] | | | | | High temperature & high pressure preparation and phase characterization of WTi10 alloy | | | Yang Yihang,Wang Qidong,Li Baoqiang,Li Jianbo and Zhang Houan | | | 2021,50(2):664-669 [Abstract(630)] [View PDF 8.13 M (678)] | | | | | Effect of Pre-charging Hydrogen on Corrosion Resistance of Zircaloy-4 in LiOH Aqueous Solution at 360 ℃ | | | XU Shitong,YAO Meiyi,MAO Yajing,LIANG Xue,PENG Jianchao and Zhou Bangxin | | | 2021,50(2):670-678 [Abstract(718)] [View PDF 1.11 M (762)] | | | | | Effects of In-Situ Produce Tungsten Boride on Microstructures and Properties of CuW alloy | | | Yang Xiaohong,Zhao Yipeng,Zou Juntao,Xiao Peng and Liang Shuhua | | | 2021,50(2):679-686 [Abstract(650)] [View PDF 4.22 M (768)] | | | | | Characteristics of tritium absorption behaviors of LaNi3.70Al0.75Mn0.55 | | | Wang Wei,Ding Wei-dong and Yang Hong-guang | | | 2021,50(2):687-692 [Abstract(602)] [View PDF 1.37 M (680)] | | | | | Effect of heat treatment on the microstructure and mechanical propertiesof P/M Inconel 718 superalloy | | | Han Zhiyu,Zhang Pingxiang,Song Jiaming,Wang Qingxiang,Liang Shujin,Tang Bin and Lai Yunjin | | | 2021,50(2):693-698 [Abstract(680)] [View PDF 4.27 M (712)] | | | |
评述
|
