+Advanced Search
Influence of Ar Ion Sputter-Etching on XPS Analysis of Ti-Si-C Nanocomposite Film
DOI:
Author:
Affiliation:

Clc Number:

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    The Ti-Si-C nanocomposite film was deposited in gas mixtures of Ar and CH4 by middle frequency unbalanced magnetron sputtering Ti80Si20 composite targets. The microstructure of the film was investigated by X-ray diffraction, Raman spectrum and X-ray photoelectron spectroscopy. The results show that the film exhibits nc-TiC/a-C:Si:H nanocomposite structure with about 10 nm nanocrystallites TiC embedded in hydrocarbon (a-C:Si:H) matrix. The results of XPS analysis strongly depend on Ar+ sputter-etching. The C and O content on the film surface distinctly decreases, while the Ti and Si content gradually increase with the increasing of Ar+ sputter-etching time. It is found that Ar+ sputter-etching results in the graphitization of the amorphous carbon phase in the nanocomposite film. In other words, the sp3C-C(H)/sp2C-C ratio decreases with the increasing of Ar+ sputter-etching time. In addition, the C-Ti*/C-Ti and C-(Ti+Ti*)/C-C ratios obviously increase.

    Reference
    Related
    Cited by
Get Citation

[Jiang Jinlong, Chen Di, Wang Qiong, Yang Hua, Wei Zhiqiang. Influence of Ar Ion Sputter-Etching on XPS Analysis of Ti-Si-C Nanocomposite Film[J]. Rare Metal Materials and Engineering,2014,43(4):977~981.]
DOI:[doi]

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:April 11,2013
  • Revised:
  • Adopted:
  • Online: July 30,2014
  • Published: