+Advanced Search
Microstructure and Mechanical Properties of aluminum alloy (ZL205A) wall produced by wire arc additive manufacturing method
DOI:
Author:
Affiliation:

1.College of Metallurgy,Northeastern University;2.Fushun Dong gong Metallurgical Materials and Technology Limited Company,Fushun ,China

Clc Number:

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    The wall of ZL205A aluminum alloy were carried out by the wire+arc additive manufacturing technology (WAAM). The microstructure,mechanical properties and so on of ZL205A aluminium alloy wall were investigated by metallographic, SEM, EDS and tensile tests, and compared with that of metal casting alloy. The results show that the thickness of the wall is uniform and the surface is smooth. Meanwhile, the burning rates of B and Cd inStheSdepositSbody are 60% and 50%, respectively. Compared with cast alloys at casting condition, the as-deposited WAAM ZL205A have more uniform grain size, smaller grain size and uniform distribution of precipitated phases in grain and grain boundaries. After heat treatment (T6), θ-phase is completely dissolved into Al matrix, and the re-melted T-phase distributes on the grain boundary. The tensile strength, yield strength and elongation of the wall are 500 Mpa, 450 Mpa and 10%, respectively, which are higher than that of the metal casting alloy, and the mechanical properties of the alloy in transverse and longitudinal directions are the same.

    Reference
    Related
    Cited by
Get Citation

[Wang Shuai, Gu Huimin, Wang Wei, Li Chengde, Ren Lingling, Wang Zhenbiao, Zhai Yuchun, Ma Peihua. Microstructure and Mechanical Properties of aluminum alloy (ZL205A) wall produced by wire arc additive manufacturing method[J]. Rare Metal Materials and Engineering,2019,48(9):2910~2916.]
DOI:[doi]

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:December 06,2018
  • Revised:February 27,2019
  • Adopted:February 27,2019
  • Online: October 09,2019
  • Published: