+Advanced Search
Home > Archive>Volume 49, Issue 7, 2020 >2480-2487. DOI:10.12442/j.issn.1002-185X.20190529
PDF HTML XML Export Cite reminder
Microstructure and mechanical properties of superalloy laser welded joints for GH3625 fabricated by laser additive
Author:
Affiliation:

1.National Defense Key Disciplines Laboratory of Light Alloy Processing Science and Technology,Nanchang Hangkong University,Nanchang Jiangxi;2.Institute of Plasma Physics,Chinese Academy of Sciences,Hefei Anhui

Clc Number:

TG115.6

  • Article
    • | |
  • Metrics
    • |
  • Reference
    • |
  • Related
    • |
  • Cited by
    • | |
  • Comments
    Abstract:

    The laser butt welding of GH3625 superalloy fabricated by laser additive was conducted. The microstructure evolution and mechanical properties of the welded joints were analyzed. The results show that a great amount of Laves phase was only precipitated at the grain boundary of upper layer in HAZ, resulting in significant coarsening of the grain boundary. Along the upper layer to the lower layer of the weld, the fusion zone and the intermediate zone are gradually transformed from cell crystal, the columnar crystal and the equiaxed fine crystal of the upper layer to columnar crystal of the lower layer. The number of equiaxed fine crystal growing close to the fusion line is gradually increased. And the central zone is dendritic. The particle of fine γ′ phase is precipitated in the weld. A number of Laves phase precipitates in the inter-dendrtic of the intermediate zone, and the morphology gradually changes from the strip of the upper layer to the particle of the lower layer. The tensile strength of the welded joint is 872 MPa, which is up to 98.2% of the base metal. The elongation is up to 90.7% of the base metal, the fracture surface of weld joint is approximately 45° inclined plane, and the fracture mode is the mixed fracture mode of brittle and ductile.

    Reference
    Related
    Cited by
Get Citation

[Geng Zhijie, Wang Shanlin, Chen Yuhua, Huang Yongde, Xin Jijun, Ke Liming, Wen Taotao, Sun Wenjun. Microstructure and mechanical properties of superalloy laser welded joints for GH3625 fabricated by laser additive[J]. Rare Metal Materials and Engineering,2020,49(7):2480~2487.]
DOI：10.12442/j. issn.1002-185X.20190529

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:June 23,2019
  • Revised:September 02,2019
  • Adopted:September 06,2019
  • Online: August 31,2020

Total visitors：

Address：96 weiyanglu, xi'an,Shaanxi, P.R.China Postcode：710016 ServiceTel：0086-26-86231117

E-mail：rmme@c-nin.com

Copyright:Rare Metal Materials and Engineering ® 2025 All Rights Reserved Support:Beijing E-Tiller Technology Development Co., Ltd. ICP: