+Advanced Search
Preparation and Corrosion Resistance of Laser-Cladded Cu-Based Alloy Coatings on Q235 Steel
Author:
Affiliation:

Key Laboratory of Power Station Energy Transfer Conversion and System, Ministry of Education, North China Electric Power University, Beijing 102206, China

Clc Number:

Fund Project:

Equipment Pre-research Fund (61409220202)

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    Copper-based coatings were prepared on the surface of Q235 steel by fiber laser under different powers. Microstructure, phase composition, corrosion resistance of the coatings were revealed by scanning electron microscopy (SEM) equipped with energy dispersive spectrometry (EDS), X-ray diffraction (XRD) and electrochemical workstation, respectively. Results show that the coatings are well bonded to the substrate. The coating microstructure consists of cellular, coarse dendrites, fine dendrites and columnar grain structure from the bottom to the top. The coatings mainly contain two phases including Cu(Ni,Fe) and Ni(Cr,Mo,Fe) solid solution. The coating with two layers prepared under 2000 W exhibits optimal corrosion resistance due to its highest corrosion potential and lowest corrosion current density.

    Reference
    Related
    Cited by
Get Citation

[Kong Yao, Liu Zongde, Li Bin. Preparation and Corrosion Resistance of Laser-Cladded Cu-Based Alloy Coatings on Q235 Steel[J]. Rare Metal Materials and Engineering,2021,50(8):2694~2699.]
DOI:XX. XXXX/j. issn.1002-185X.2021.08.005

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:June 17,2020
  • Revised:July 13,2021
  • Adopted:August 04,2020
  • Online: September 07,2021
  • Published: August 31,2021