Quick Search:       Advanced Search
黄威,马文,杨挺,杨曦,刘颖,白玉.溶液等离子喷涂铈酸镧热障涂层的制备及表征[J].稀有金属材料与工程(英文),2020,49(2):561~566.[Huang Wei,Ma Wen,Yang Ting,Yang Xi,Liu Ying and Bai Yu.Preparation and characterization of solution precursor plasma sprayed La2Ce2O7 thermal barrier coating[J].Rare Metal Materials and Engineering,2020,49(2):561~566.]
Preparation and characterization of solution precursor plasma sprayed La2Ce2O7 thermal barrier coating
Download Pdf  View/Add Comment  Download reader
Received:March 15, 2019  Revised:May 06, 2019
Key words: La2Ce2O7  solution precursor plasma spray  thermal barrier coatings  Taguchi experiments
Foundation item:国家自然科学基金资助(项目号51462026,51672136),内蒙古科技重大专项(2018-810)
Author NameAffiliation
Huang Wei,Ma Wen,Yang Ting,Yang Xi,Liu Ying and Bai Yu  
Hits: 14
Download times: 2
      La2Ce2O7 is a fluorite-structured ceramic material with lower thermal conductivity and better high-temperature phase stability than 8YSZ, thus, it is considered as a new thermal barrier coating ceramic material. The solution precursor plasma spraying (SPPS) method is a novel coating preparation method for preparing nanostructured ceramic thermal barrier coatings in recent years. The prepared SPPS coatings have an inter pass boundary (IPB) structure, with low thermal conductivity and long lifetime. In this paper, the decomposition processes of the La2Ce2O7 coating precursor were studied, and the La2Ce2O7 coating was prepared by SPPS method. The nitrate solution with a molar concentration of 3.08 mol/L was used as the precursor solution, and its viscosity and surface tension were 7.17 mPa.s and 76.9 mN/m, respectively. The decomposition process of the La2Ce2O7 dried precursor was characterized by STA-FTIR-QMS. The decomposition temperature and decomposition process of the precursor were evaluated, and the preheating temperature of substrate was determined to be 450 °C. The optimized spary parameters were the atomization pressure of 1.2 bar, the current of 700 A, and the liquid feed rate of 17 ml/min, determined by the Taguchi experiments. The La2Ce2O7 coating prepared by using the optimzed spray parameter had a thickness of 121.59 μm after 20 times spraying, relative density of 92.4%, and hardness of 2.1 GPa. The prepared coatings were characterized by SEM, XRD, EDS and laser flash method. The results showed that the La2Ce2O7 thermal barrier coating with low thermal conductivity, uniform element distribution and fluorite structure is obtained.