+Advanced Search
Joining of Lanthanum Chromate Ceramics by Spark Plasma technology
DOI:
Author:
Affiliation:

1.School of Chemical Engineering,Inner Mongolia University of Technology,Inner Mongolia Hohhot School of Materials Science and Engineering,Inner Mongolia University of Technology,Inner Mongolia Hohhot;2.Inner Mongolia Key Laboratory of Thin Film and Coatings Technology,Inner Mongolia Hohhot;3.School of Materials Science and Engineering, Inner Mongolia University of Technology

Clc Number:

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    Lanthanum chromate ceramics with poor tensile properties, high brittleness, difficult deformation and high hardness is difficult to process. Large ceramic components with complex shapes can be fabricated at low cost by ceramic joining technology. In this paper, the lanthanum chromate precursor slurry was used as the interlayer material, and the lanthanum chromate ceramic was joined by spark plasma technology. And then the bonding strength of the joining was measured. The influence of joining temperature and holding time on the strength of the joint was analyzed by means of SEM, EDS and so on.

    Reference
    Related
    Cited by
Get Citation

[Dong Hongying, Chen Xiaodong, Jia Pengwei, Li Jianguo.,Zhu Liwei, Ma Wen. Joining of Lanthanum Chromate Ceramics by Spark Plasma technology[J]. Rare Metal Materials and Engineering,2020,49(2):634~638.]
DOI:[doi]

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:April 01,2019
  • Revised:May 06,2019
  • Adopted:October 23,2019
  • Online: March 12,2020
  • Published: