| |
Volume 48,Issue 8,2019 Table of ContentsDownload Contents
难熔金属 | | | Evolution of crystallographic texture of zirconium alloy during hot deformation | | | Zeng Qinghui,Luan Baifeng,Chapuis Adrien and Liu Qing | | | 2019,48(8):2393-2399 [Abstract(1082)] [View PDF] | | | | | Schmid factor maps to predict slip and twinning behaviours in Zirconium | | | Chao Xin,Qiaoyan Sun,Lin Xiao and Jun Sun | | | 2019,48(8):2400-2405 [Abstract(1108)] [View PDF] | | | | | Effect of mechanical milling time on the helium irradiation behavior of W-Nb alloys | | | Lai–Ma Luo,Meng–Yao Xu,Xiang Zan,Qiu Xu,Xiao–Yong Zhu,Jia-Qin Liu,Ji–Gui Cheng and Yu–Cheng Wu | | | 2019,48(8):2406-2412 [Abstract(1073)] [View PDF] | | | | | Research and Analysis of Heat Absorption Ratio of TZM | | | Pengfei Zi,Lei Li,Lei Cao and Damao Yao | | | 2019,48(8):2413-2417 [Abstract(1064)] [View PDF] | | | | | Inter-granular infiltration of TZM alloy joints brazed using Ni-Ti brazing alloy with high temperature | | | Lu Quanbin,Zhong Sujuan,Li Shengnan,Cheng Zhan and Long Weimin | | | 2019,48(8):2418-2423 [Abstract(1053)] [View PDF] | | | | | The Effect of Rolling on Deformation-induced Martensite Transformation in a Metastable β-ZrTiAlV Alloy | | | Luan baifeng,Xie hui,Liao zhongni,Li feitao and Mao min | | | 2019,48(8):2495-2501 [Abstract(1031)] [View PDF] | | | | | Analysis of Crystallographic Orientation and Mechanical Performance of Cold-rolled Molybdenum Sheets for Vacuum Electron Devices | | | Zhou Zenglin,Li Yan,Xie Yuanfeng,Hui Zhilin,He Xueliang,Wang Fu and Fu Xiaoying | | | 2019,48(8):2502-2506 [Abstract(965)] [View PDF] | | | | | Effect of second phase particels on the hydrogen absorption properties of Zr-Sn-Nb zirconium alloys | | | Zhang Yin,Zhang Cheng,Yuan Gaihuan,Gao Bo and Song Xiping | | | 2019,48(8):2507-2514 [Abstract(1114)] [View PDF] | | | | | Low Cycle Fatigue Properties and Predication of Fatigue Life for commercially purity zirconium | | | wangxinhan and Yang Xirong | | | 2019,48(8):2515-2522 [Abstract(931)] [View PDF] | | | | | The effect of pre-compressed deformation on precipitation behavior of Zr-Sn-Nb-Fe-Cr-Cu alloy during aging | | | Luan Baifeng,Hao Shaoyan,Wu Weiran and Li Shuo | | | 2019,48(8):2523-2530 [Abstract(941)] [View PDF] | | | | | Effect of Surface Nanocrystalline on Four-point Bending Fatigue Properties of Commercial Pure Zirconium | | | Wang Yaomian,Cheng Jiapeng and Zhang Conghui | | | 2019,48(8):2574-2579 [Abstract(904)] [View PDF] | | | | | Research on Microstructure and Crystal Orientation of pure tungsten Fabricated by Selective Electron Beam Melting | | | Yang Guangyu,Yang Pengwei,Liu Nan,Yang Kun,Jia Liang,Xu Zhongguo,Wang Jian and Tang Huiping | | | 2019,48(8):2580-2584 [Abstract(886)] [View PDF] | | | | | Study on hot multi-spinning processing of shearing and rheological deformation of molybdenum | | | Feng Pengfa,Dang Xiaoming,Zhang Changle,Zhao Hu,Wang Na and Li Fuguo | | | 2019,48(8):2585-2593 [Abstract(874)] [View PDF] | | | | | Preparation and application of spherical tungsten powder | | | Zhou Wuping,Zhang Yingying,Wang Xuebing,Yang Huaichao,Xiong Ning,Liu Guohui and Wang Tiejun | | | 2019,48(8):2594-2601 [Abstract(864)] [View PDF] | | | | | Study of electrolytic hydrogen charging process and microstructure evolution of zirconium alloy | | | Zhang Yin,Zhang Cheng,Yuan Gaihuan,Gao Bo and Song Xiping | | | 2019,48(8):2602-2608 [Abstract(957)] [View PDF] | | | | | Fatigue properties of the Ultrafine-grained Commercially Pure Zr | | | Yang Xirong and Liu Feng | | | 2019,48(8):2609-2615 [Abstract(877)] [View PDF] | | | | | Preparation of 90W-7Ni-3Fe Heavy Alloy Sheet by Tape-casting | | | Li Bangyi,Wu Fang,Zhang Jing,Feng Jian,Shao Jiajun and Zhu Yubin | | | 2019,48(8):2616-2622 [Abstract(969)] [View PDF] | | | | | Effect of Milling Time on Preparation of NbMoTaW High Entropy Alloy Powder by Mechanical Alloying | | | qipeibu,liangxiubing,tongyonggang,chenyongxiong and zhangzhibin | | | 2019,48(8):2623-2629 [Abstract(944)] [View PDF] | | | |
材料科学 | | | Quantitative prediction of Small Crack Stress Corrosion Crack Propagation Rate of Alloy 600 for Nuclear Pressure Vessels | | | Xiurong Fang,Jinhui Yang,Yanru Shao and Xue Ou | | | 2019,48(8):2424-2431 [Abstract(1042)] [View PDF] | | | | | Study on Deformation Behavior of TC4 Titanium Alloy Laser Welded Butt Joint under Static Tensile Loading | | | Ai-Qin Duan,Zhen-Su Wang,Huan Peng and Xu-Yi Ma | | | 2019,48(8):2432-2440 [Abstract(876)] [View PDF] | | | | | Hydrogen bubble templated co-deposition of dendritic porous PdAg films and electrocatalytic activity | | | Guo kuaile,Lian Lixian,Liu Ying and Chen Jing | | | 2019,48(8):2441-2446 [Abstract(960)] [View PDF] | | | | | The phase transformation and magnetic properties of La-Ca-Co-Zn doped M-type hexaferrites | | | An Jianzhang,Jingwen Ye,Zhenghua Tang,Yike Chen and Yao Qin | | | 2019,48(8):2447-2453 [Abstract(931)] [View PDF] | | | | | Grain Boundary Character Distributions of Coincidence Site Lattice Boundaries in WC-Co Composites under Plastic Deformation | | | Xiaokun Yuan,Xuehong Zhang and Sixu Deng | | | 2019,48(8):2454-2459 [Abstract(915)] [View PDF] | | | | | Process optimization to surface morphology and internal quality on metal droplets horizontal lapped deposition | | | SuLi LI and laixia yang,bingheng lu | | | 2019,48(8):2460-2467 [Abstract(1039)] [View PDF] | | | | | The study on micro arc oxidation coating based on Ti-5Al-1V-1Sn-1Zr-0.8Mo alloy with applied voltage in stages | | | Lü Kai,Guo baoquan,Zhang yaping and Chen weidong | | | 2019,48(8):2474-2479 [Abstract(1039)] [View PDF] | | | | | Effects of CeO2 contents and particle sizes on the interdiffusion between an aluminide coating and underlying substrate at high temperature | | | Tan Xiaoxiao and Dan Sun | | | 2019,48(8):2480-2487 [Abstract(915)] [View PDF] | | | | | The effect of Parameter describing pore structure on properties of carbon and graphite materials | | | fanlei,yaowenjuan,liuguangyan,tangduting and gaopengfei | | | 2019,48(8):2488-2494 [Abstract(1006)] [View PDF] | | | | | Piercing temperature prediction via processing map for a new marine titanium alloy | | | Zhou Dadi,Zeng Weidong and Xu Jianwei | | | 2019,48(8):2531-2536 [Abstract(922)] [View PDF] | | | | | Effect of bulging process on residual stress of TC4 alloy ring forgings | | | Wei Zhijian,Li Jinshan,Lv Nan and Yang Yanhui | | | 2019,48(8):2537-2543 [Abstract(771)] [View PDF] | | | | | Study on the Cutting Mechanism of Monocrystalline Germanium Based on Nano Scratch Experiment | | | Geng Ruiwen,Yang Xiaojing,Xie Qiming,Li Rui and Luo Liang | | | 2019,48(8):2544-2549 [Abstract(793)] [View PDF] | | | | | Deformation behavior analysis of Al-Zn-Mg-Cu Alloy Processed by Equal Channel Angular Dual-directional Extrusion | | | LIPING,WEILI,DUANZIHAO,WANGXUE and XUEKEMIN | | | 2019,48(8):2550-2555 [Abstract(851)] [View PDF] | | | | | Microstructure of Ti2AlNb-based Alloy processed by Multi-directional Forging in (B2+O) Phase Region | | | Xue Kemin,Hu Yong,Shi Yingbin,Ji Xiaohu,Gan Guoqiang and Li Ping | | | 2019,48(8):2556-2561 [Abstract(990)] [View PDF] | | | | | Study on the catalytic mechanism of La-F two-step co-doping TiO2 by electrochemical method | | | Wang Ruifen,Song Jinling,Li Yu,An Shengli and Wang Fuming | | | 2019,48(8):2562-2567 [Abstract(879)] [View PDF] | | | | | Preparation and characterization of Cu-doped TiO2 Nanotube Array Films | | | sun yanhao,liu yiming,zhang wanggang,wen jing,niu xiaofeng and WANG Hongxia | | | 2019,48(8):2568-2573 [Abstract(892)] [View PDF] | | | |
材料工艺 | | | Effect of Graphene doping on Microstructures and Properties of Cu-Nb Composite Wires | | | Wang Pengfei,Liang Ming,Xu Xiaoyan,Jin Lihua,Li Chengshan,Li Jinshan and Zhang Pingxiang | | | 2019,48(8):2630-2634 [Abstract(798)] [View PDF] | | | | | Study on High Temperature Behavior of Tungsten-Based Powder Alloy Joints Brazed with CuAgNi Solder | | | LuYuzhen,ShangQinghui,QiuXiaoming,LuoCui and XingFei | | | 2019,48(8):2635-2639 [Abstract(868)] [View PDF] | | | | | Effect of Cr Element on the Microstructure and Mechanical Properties of near-α titanium Alloy for Pressure Vessel of Nuclear Reactor | | | zhaobin,zhaoyongqing,luoyuanyuan,houzhimin,zhangjingli,wujinping and zhangpingxiang | | | 2019,48(8):2640-2646 [Abstract(889)] [View PDF] | | | | | Controllable Gelation of Non-aqueous Gel system for Porous FeAl intermetallic | | | Duan Bohua,Shen Ting and Wang Dezhi | | | 2019,48(8):2647-2654 [Abstract(877)] [View PDF] | | | | | Effect of Pulse Current Frequency on Mechanical Properties of TC4 Titanium Alloy with Prefabricated Defects | | | Li Xifeng,Jia Guopeng,Jiang Jun and Chen Jun | | | 2019,48(8):2655-2660 [Abstract(773)] [View PDF] | | | | | Effect of Final Thermo-mechanical Treatment on the microstructure and property of Al-5.2Mg-3.1Zn(wt.%) aluminum alloy | | | Qingwei Ding,Di Zhang,Shengli Hou,Yanlin Pan and Jishan Zhang | | | 2019,48(8):2661-2666 [Abstract(1041)] [View PDF] | | | | | Preparation and synergistic antibacterial mechanism of terbium/zincantibacterial silica gel | | | mao huaming,zhangbin,tang xiaoning,hu Yanling,JIANG Miaomiao and CHEN Yifan | | | 2019,48(8):2667-2676 [Abstract(893)] [View PDF] | | | | | Effect of Ta on Microstructure and Hardness in βTitanium Aluminides Sheet | | | LuoYuanyuan,Zhao Bin,GuoDizi,ZhangJingli,YangFan,WuJinping and MaoXiaonan | | | 2019,48(8):2677-2682 [Abstract(908)] [View PDF] | | | | | Effect of Ni Addition on the Catalytic Performance of Pt - based Catalysts for Direct Ethanol Fuel Cells | | | Guo Ruihua,Qian Fei,An Shengli,Zhang Jieyu,Zhou Guozhi and Mo Yijie | | | 2019,48(8):2683-2688 [Abstract(919)] [View PDF] | | | | | Preparation and corrosion protection of Al2O3-TiO2-Ta coating on aluminum surface by plasma spraying | | | Feng Huang,Ming Nie,Wenhao Zhou,Zhengao Wang,Ruming Fu and Chengyun Ning | | | 2019,48(8):2689-2693 [Abstract(825)] [View PDF] | | | | | Effect of Purified Smelting Method on Microstructure and Mechanical Properties of DZ125L Superalloy | | | tanzheng,tongjian,ninglikui,liuenze and zhengzhi | | | 2019,48(8):2694-2700 [Abstract(784)] [View PDF] | | | | | Effect of heating temperature on microstructure and mechanical properties of titanium clad steel by hot roll bonding | | | Chai Xiyang,Shi Zhongran,Chai Feng,Su Hang,Yang Zhigang and Yang Caifu | | | 2019,48(8):2701-2710 [Abstract(896)] [View PDF] | | | | | The Fabrication and Superconducting Property of MgB2/Mo Multilayer Films | | | Zhou Zhang yu,Xiao Han,Wang Song,Zhang Qing Zhu,Wang Dai Qiang,Chen Yu Qing and Fu Xing hua | | | 2019,48(8):2711-2715 [Abstract(816)] [View PDF] | | | | | Structure and Tribological Properties of MoS2 Films Deposited by Unipolar Pulse Magnetron Sputtering | | | DAN Min,LUO Rong-rong,ZHOU Yi,LI Jian and JIN Fan-ya | | | 2019,48(8):2716-2722 [Abstract(992)] [View PDF] | | | | | Effect of Heat Treatments on Microstructure and Mechanical Property of Electron Beam Weldment of Ti1300 Alloy | | | Ma Quan,Xin Shewei,Song Kai,Zhou Wei,Li Qian,Mao Xiaonan and Qin Shaojun | | | 2019,48(8):2723-2728 [Abstract(813)] [View PDF] | | | |
|
