| |
Volume 50,Issue 4,2021 Table of ContentsDownload Contents
高温合金 | | | In-situ Observation of Shrinkage Formation and Mechanism during Ni-based Superalloy Solidification | | | Tongzhou Xu,Xiuhong Pan,Minghui Zhang,Meibo Tang,Huidong Li and Xuechao Liu | | | 2021,50(4):1113-1117 [Abstract(1175)] [View PDF 3.88 M (1350)] | | | | | High temperature corrosion behavior of GH3625 alloy under acidic atmosphere SO2 | | | dingyutian,wangjingjie,mayuanjun,gaoyubi,chenjianjun and zhangdong | | | 2021,50(4):1118-1124 [Abstract(1096)] [View PDF 1.61 M (1177)] | | | | | Molten Pool Flow Morphology during Vacuum Arc Remelting Process for GH4698 Alloy | | | ZanLei,LuoDehan,LiYing,ZhangJian and YuYaowei | | | 2021,50(4):1125-1131 [Abstract(814)] [View PDF 2.15 M (1242)] | | | | | Influence of small degree deviated from [001] orientation on creep behavior of Ni-based single crystal superalloys---A review | | | Du Yu-ling,Tan Zi-hao,Yang Yan-hong,Chen Chao,Wang Xin-guang,Zhou Yi-zhou and Sun Xiao-feng | | | 2021,50(4):1132-1138 [Abstract(914)] [View PDF 5.98 M (1232)] | | | | | The competitive growth of dendrite arrays in the directional growth of a thin sample | | | Yang Zenan,Zhang Zhen,Guo Chunwen,Pan Hao,Wang Zhen,Zhang Qiang,Huang Chaohui and Wang Zhijun | | | 2021,50(4):1247-1253 [Abstract(1014)] [View PDF 1.52 M (1088)] | | | | | Molecular Dynamics Simulation of Tensile Mechanical Properties of Ni/Ni3Al | | | Xu Zhu,Wu-Gui Jiang,Yuan-Cai Li and Hui Lv | | | 2021,50(4):1254-1262 [Abstract(939)] [View PDF 1.96 M (1227)] | | | | | Effect of Strain Waveform on Low-Cycle Fatigue Properties of Inconel 625 Alloy | | | Liu Xueying,Chen Lijia,Zhou Ge and Wang Baosen | | | 2021,50(4):1263-1269 [Abstract(820)] [View PDF 21.33 M (1414)] | | | | | Short-term high temperature oxidation behavior of Pt-modified Ni3Al-based alloys | | | Zhang Zhixi,Cao Yiran and Cao Guanghui | | | 2021,50(4):1270-1282 [Abstract(749)] [View PDF 9.57 M (1218)] | | | | | Microstructure and mechanical property of electron beam welding joint of GH4169 alloy with different crystal orientations fabricated by laser additive manufacturing | | | Liu Fencheng,Chen Yue,Xv Yang,Li Chunyu,Liu Fenggang and Li Qiuge | | | 2021,50(4):1283-1295 [Abstract(897)] [View PDF 4.15 M (1216)] | | | | | Effect of Heat Treatment on Grain Boundary and Tensile Behavior of Selective Laser Melting GH3536 Alloy | | | Yan Xiang,Cheng Xiaoyu,Liu Jufeng,Zhong Fei,Wang Shunhua,Zheng Genwen and Liu Hai | | | 2021,50(4):1296-1303 [Abstract(823)] [View PDF 4.10 M (1221)] | | | | | Selection of laser melting forming Hastelloy X alloy finite element simulation and anisotropy of microstructure and properties | | | zongxuewen,zhangjian and liuwenjie | | | 2021,50(4):1304-1310 [Abstract(765)] [View PDF 1.41 M (1106)] | | | | | Stability of Annealing Twin Boundaries and the Fracture Behavior of GH3625 alloy during in situ Tension | | | Chen Jianjun,Ding Yutian,Wang Kun,Ma Yuanjun,Wang Xingmao and Yan Kang | | | 2021,50(4):1311-1317 [Abstract(852)] [View PDF 17.28 M (1276)] | | | | | Study on the Dynamic Recrystallization Behavior of GH4742 Superalloy | | | Zhou Ge,Li Jianlin,Men Yue,Zhang Haoyu,Che Xin,Zhu Xiaofei and Chen Lijia | | | 2021,50(4):1318-1324 [Abstract(892)] [View PDF 6.99 M (1226)] | | | | | Development and Testing of novel Casted&Wrought GH4096 Alloy Labyrinth Disk | | | TIAN Wei,ZHONG Yan,FU Yu,BAI Yunrui,FU Rui and LI Fulin | | | 2021,50(4):1325-1333 [Abstract(737)] [View PDF 6.41 M (1231)] | | | | | Dynamic in-situ study on the phase transition of GH4169 superalloy during homogenization process | | | LIU Yan-mei,ZHAO Meilan,FENG Hui,SUN Wenru and WANG Tie-gang | | | 2021,50(4):1334-1341 [Abstract(845)] [View PDF 2.07 M (1099)] | | | | | Influence of Al Content on the Microstructure and Stress rupture Property of Cast Superalloy with High W Content | | | Wu Jiantao,Yuan Xiaofei,Song Shengyu,Chen Xingfu and Li Wei | | | 2021,50(4):1342-1349 [Abstract(863)] [View PDF 26.29 M (1381)] | | | | | Microstructure evolution and Competitive Growth during Grain Growth of Directionally Solidified Column Crystal DZ4125 Superalloy | | | XU Mang,LIU Guohuai,ZHANG Xianglong,LI Zeyu,WANG Bingxing,WANG Zhaodong and GUO Jingjie | | | 2021,50(4):1350-1358 [Abstract(744)] [View PDF 16.98 M (1212)] | | | | | Research Status of Additive Repairing Technologies for Nickel-Based Cast Superalloy Blades | | | GUO Yang,ZHANG Jianxun,XIONG Jiankun and ZHAO Pengfei | | | 2021,50(4):1462-1470 [Abstract(1009)] [View PDF 645.56 K (1141)] | | | |
材料科学 | | | Experimental and theoretical analysis of void evolution during irradiation in 0.29V-0.09Ta RAFM steel | | | Xia Lidong,Huo Xiaojie,Chen Hao,Yang Zhigang and Zhang Chi | | | 2021,50(4):1139-1145 [Abstract(875)] [View PDF 4.27 M (1154)] | | | | | Structural Design and Numerical Simulation Optimization of SiCWood Ceramic Composite Armor | | | Chen Zhiyong,Xu Yingqiang,Li Bin,Li Miaoling and Xiao Li | | | 2021,50(4):1146-1155 [Abstract(939)] [View PDF 3.68 M (1168)] | | | | | Deformation behavior and constitutive modeling of thin pure molybdenum sheet at room to medium temperatures | | | Peng Dai,Hanfei Gao,Ning Wang,Xiaoguang Fan and Mingming Sun | | | 2021,50(4):1156-1165 [Abstract(809)] [View PDF 7.87 M (1182)] | | | | | Investigation of the microstructure and mechanical properties of niobium and 316L stainless steel joints by TU1 Oxygen free copper solder | | | Wang Ruoxu,Huang Yulu,Jiang Tiancai,Guo Hao,Xiong Pingran,Tan Teng,Yue Weiming,Zhang Zhouli,He Yuan and Zhang Xingyi | | | 2021,50(4):1166-1172 [Abstract(942)] [View PDF 3.04 M (1119)] | | | | | Centrifugal investment casting of Ti-47Al-6Nb exhaust valves | | | Xu Rongfu,Li Changhou,Xu Yong,Zhang Dongming and Shi Yueya | | | 2021,50(4):1173-1178 [Abstract(742)] [View PDF 3.34 M (1178)] | | | | | Effect of sintering temperature on the microstructure and machining performance of (Ti, W, Mo, Nb)(C, N)-(Co, Ni) cermets | | | xiang zhong nan,Li Zhan jiang,Huang Shui gen,Chang Fa and Dai Pin qiang | | | 2021,50(4):1179-1186 [Abstract(871)] [View PDF 1.98 M (1091)] | | | | | Effect of extrusion parameters on microstructure and mechanical properties of a SiC particles reinforced Mg-3.6Zn-0.6Y-0.2Ca matrix composite | | | Nie Kaibo,Yang An,Deng Kunkun,Kang Xinkai and Li Yanan | | | 2021,50(4):1187-1195 [Abstract(765)] [View PDF 4.57 M (1155)] | | | | | Enhanced sensing properties of acetone with hollow porous NiO/SnO2 nanocomposites decorated by Carbon nanotubes | | | Honglei Zhou,Xiaohong Chen,Jun Fan and Ping Liu | | | 2021,50(4):1196-1203 [Abstract(743)] [View PDF 4.17 M (1191)] | | | | | Synthesis and luminescent properties of Y2O2SO4: Eu3+ sub-micron rods | | | Yuxiang Wang,Shengwen Zhong,Xiaoqiang Wen and Qian Zhang | | | 2021,50(4):1204-1209 [Abstract(742)] [View PDF 3.03 M (1059)] | | | | | Metallic amorphous Al/Ti spherical particles and its catalysis effects on the thermal decomposition of high explosives | | | Song Xiaolan,Wang Yi,Liu Shuang,Cheng Zhipeng and Li Fengsheng | | | 2021,50(4):1210-1217 [Abstract(729)] [View PDF 7.13 M (1119)] | | | | | The apparent thermal conductivity of Er3Ni particles at 4-40 K and measures to reduce the heat leakage of its regenerator | | | yangbiao,xixiaotong,wangjue,liuxuming,chenliubiao,zhouyuan and wangjunjie | | | 2021,50(4):1218-1222 [Abstract(745)] [View PDF 6.83 M (1185)] | | | | | Research into Microstructure and Mechanical Properties of 6061 Al / AZ31B Mg / 6061 Al Symmetrical Laminated Plate | | | 杨霞,He Dongsheng,Du Xiaozhong and Wang Rongjun | | | 2021,50(4):1223-1232 [Abstract(886)] [View PDF 3.82 M (1119)] | | | | | Study on the hot deformation behavior of Ti2041 alloy based on BP neural network and 3D processing map | | | Zhou Xuan,Wang Kelu,Lu Shiqiang and Li Xin | | | 2021,50(4):1233-1240 [Abstract(714)] [View PDF 31.39 M (1335)] | | | | | Purification and particulate controllable of tungsten particles by hydrometallurgy combined with spray drying-pyrolysis process | | | Anjin Li | | | 2021,50(4):1241-1246 [Abstract(752)] [View PDF 3.44 M (1077)] | | | |
材料工艺 | | | Microstructure and room temperature deformation behavior of Mg-9.5Li-2.56Al-2.58Zn alloy | | | Jinlong Zhang,Enhao Lu,Jun Zhu,Ying Zhang,Hang Jiang,Chen Yin and Qiming Zhang | | | 2021,50(4):1359-1364 [Abstract(667)] [View PDF 1.46 M (1122)] | | | | | Multi-scale Texture Analysis of Titanium Alloy Made by Laser Additive | | | Zuo Yuting,Wang Shuming,Li Cong,Zhang Limin and Zhu Yanyan | | | 2021,50(4):1365-1370 [Abstract(1067)] [View PDF 4.96 M (1181)] | | | | | Preparation of Titanium Dioxide Thin Films by Atomic Layer Deposition and Its Photocatalytic Activity | | | Hou Jing,Yang Peizhi,Zheng Qinhong,Li Sai and Yang Dewei | | | 2021,50(4):1371-1377 [Abstract(742)] [View PDF 1.74 M (1123)] | | | | | Effect of atomic diffusion on magnetization reversal and coercivity in sintered (Nd,Tb)-Fe-B magnets | | | QIN yuan,MA Bin-jie and LI Zhu-bai | | | 2021,50(4):1378-1383 [Abstract(789)] [View PDF 1.98 M (1118)] | | | | | Study on the properties of WC@W-Cu composite prepared by electroplating | | | Zhao Yuchao,Tang Jiancheng,Ye Nan,Zhuo Haiou,Wei Chaolong and Zhou Weiwei | | | 2021,50(4):1384-1390 [Abstract(822)] [View PDF 81.69 M (1599)] | | | | | The influence of the arrangement of double voids on the c-axis compressed magnesium single crystal | | | Wang Huanzhu,Xue Chun,Yang Qianhua,Gui Hailian,Li Yugui and Chu Zhibing | | | 2021,50(4):1391-1397 [Abstract(778)] [View PDF 1.23 M (1063)] | | | | | Influence of Heat Treatment on the Anisotropic Mechanical Behavior of 2198 Al-Li Alloy Sheet | | | PENG Haoyun,XIE Hongzhi,BAI Xueshan,ZHANG Shuai,YIN Yanguang and ZHAO Tianzhang | | | 2021,50(4):1398-1404 [Abstract(838)] [View PDF 5.77 M (1149)] | | | | | The effect of Mn concentration on the magnetic and magnetocaloric properties for Mn-based Heusler alloys | | | Miao Xiaoji, and Jing Hu | | | 2021,50(4):1405-1408 [Abstract(694)] [View PDF 1012.76 K (1110)] | | | | | Application of copper plating technology in the fundamental power input coupler | | | Zhang Shuai,Luo Jirun,Wang Xiaoxia,Zhang Rui and Wu Zhijie | | | 2021,50(4):1409-1416 [Abstract(694)] [View PDF 1.07 M (1125)] | | | | | Effect of tribo-oxide layers on wear properties and coefficient of friction of TC4 alloy in fretting | | | He Yanni,Yu Shurong,Li Shuxin and Chen Qiang | | | 2021,50(4):1417-1424 [Abstract(935)] [View PDF 16.32 M (1269)] | | | | | Microstructures and mechanical properties of low-alloyed Mg-Zn-Y magnesium alloy | | | Li ya nan,NIE KAIBO,Deng kunkun and Yang an | | | 2021,50(4):1425-1432 [Abstract(740)] [View PDF 1.38 M (1098)] | | | | | Diffraction Peak Profile Analysis and Texture Measurement of a Two-phase Titanium Alloy TC16 | | | Yang Mengyao,Yuan Lihong,Wang Wenrui,Zhang Hui and Zhang Wangfeng | | | 2021,50(4):1433-1440 [Abstract(875)] [View PDF 2.64 M (1140)] | | | | | Effect of Oxide Additives on the Creep Resistance of Ag-SnO2 Contact Materials | | | Yang TianYang,Ma YuanYuan,Zhang XiaoLong,Feng WenJie and Li GuiJing | | | 2021,50(4):1441-1447 [Abstract(722)] [View PDF 4.46 M (1144)] | | | | | Shan Jiefeng 1, Yu Nengjun1, Zhang Suyin1, Jin Xiangyang2, Wu Qiong1, Zhang Pengyue1, Ge Hongliang1 | | | shanjiefeng,yunengjun,zhangsuyin,jinxiangyang,wuqiong,zhangpengyue and gehongliang | | | 2021,50(4):1448-1454 [Abstract(644)] [View PDF 1.97 M (1079)] | | | | | Effects of Annealing Temperature on Textures and Corrosion Resistance | | | CAIWENBO,WUYU,YAOXIUNAN,ZHAOHONGLEI,CHENHAO,ZHANGKAIYUE and BAIXINFANG | | | 2021,50(4):1455-1461 [Abstract(699)] [View PDF 1.29 M (1071)] | | | |
评述
|
