| |
Volume 50,Issue 1,2021 Table of ContentsDownload Contents
材料科学 | | | Dual Effects of Ruthenium on the TCP Precipitation of a Single Crystal Superalloy at 980℃ and 1160℃ | | | Yue Xiaodai,Li Jiarong,Liu Shizhong,Shi Zhenxue,Yang Wanpeng and Wang Xiaoguang | | | 2021,50(1):1-6 [Abstract(1616)] [View PDF 1.79 M (1757)] | | | | | Intermetallic Compounds in The Copper-Aluminum Brazed Joints | | | W. M. Long,Y. Zhao,S. J. Zhong,G. X. Zhang and S. Huang | | | 2021,50(1):7-13 [Abstract(1360)] [View PDF 840.10 K (1653)] | | | | | Static Recrystallization Behavior of Deformation Induced Inconel 625 Superalloy Pipe | | | Chen Jianjun,Ding Yutian,Gao Yubi,Ma Yuanjun,Wang Xingmao and Yan Kang | | | 2021,50(1):14-22 [Abstract(1243)] [View PDF 33.89 M (2370)] | | | | | DICTRA? simulation of Mg and Mn Micro Segregations in a Al-Mg5.0-Mn0.5 Aluminum Alloy During Homogenized Annealing | | | Zhiliu Hu,Pingzhen Li,Zepeng Lu,Benli Ma,Jun Ding,Yanjun Zhao,Peng Tang and Qianbin Huang | | | 2021,50(1):23-28 [Abstract(991)] [View PDF 3.62 M (1387)] | | | | | Study on hot deformation and dynamic recrystallization behavior of pure titanium in EB furnace process | | | Du Yang,Li Ba,Fu Hang,Tong Shuai,Hu Jianwen and Sun Xinjun | | | 2021,50(1):29-34 [Abstract(1087)] [View PDF 1.58 M (1420)] | | | | | First-principles calculations study of low Young’s modulus Ti-Mo-Sn alloys for biomedical applications | | | Zhao Xi,Yu Sen,Zheng Jiming,Liu Hanyuan,Cheng Jun and Ma Xiqun | | | 2021,50(1):35-42 [Abstract(861)] [View PDF 2.31 M (1700)] | | | | | Effects on microstructure and mechanical properties of Ti53Nb alloy prepared by room temperature compositing process and heat treatment technology | | | 刘汉源 | | | 2021,50(1):43-48 [Abstract(856)] [View PDF 8.70 M (1485)] | | | | | Microstructure and corrosion behavior of extruded Mg-Zn-Y-Nd alloy respect to Mn addition | | | 刘宝胜,wangyaning,zhangyuezhong,houlifeng and weiyinghui | | | 2021,50(1):49-55 [Abstract(907)] [View PDF 1.93 M (1515)] | | | | | Effects of Indium sulfide on structure and corrosion resistance of the micro-arc oxidation coating on ZL108 alloy | | | wang ping,Hu jie,Li Ruiyang,Gong Zeyu,Liu Jiwei,Xiong Dan,Xiang Dong,Wei Xiaowei and Zu Xiaotao | | | 2021,50(1):56-62 [Abstract(762)] [View PDF 5.56 M (1824)] | | | | | Influence of SnO2 content on AgCuOSnO2 electrical contact preformance | | | Minjie Yanga,Manmen Liu,Fang Yao,Xiaolong Li and Xiaolong Zhou | | | 2021,50(1):63-70 [Abstract(841)] [View PDF 1.53 M (1400)] | | | | | Electrodeposition and mechanism of Ni/nano-WC composite coatings | | | Shi Xingwang,Cheng Jianyi,Ye Nan,Tang Jiancheng and Chen Weicong | | | 2021,50(1):71-77 [Abstract(727)] [View PDF 1.79 M (1378)] | | | | | Microstructure Evaluation and Mechanical Properties of Ti6Al4V/Inconel 718 Composites Prepared by Direct Laser Deposition | | | Dalian University of Technology,Yuan shijun,Yu Chao,He aidi,Ma Guangyi,Niu Fangyong and Lu Fan | | | 2021,50(1):78-84 [Abstract(1016)] [View PDF 8.18 M (1983)] | | | | | Property research of Cu-Graphene composite coatings gluing on quartz fiber surface | | | Song Qi Liang,Hu Zhen Feng,Tu Long,Kong Ling Chao,Liang Xiu Bing and Liu Er Bao | | | 2021,50(1):85-94 [Abstract(863)] [View PDF 4.07 M (1423)] | | | | | Microstructural and Mechanical Properties of an Al-Cu-Sn Alloy Wall Deposited by Wire + Arc Additive Manufacturing | | | Shuai Wang,Huimin Gu,Wei Wang,Chengde Li,Lingling Ren,Zhenbiao Wang,Yuchun Zhai and Peihua Ma | | | 2021,50(1):95-101 [Abstract(814)] [View PDF 27.01 M (1818)] | | | | | The Evolution of Microstructure and Propertiesof W-80Cu Sheets During Heat Treatment | | | Xi-ran Wang,Shi-zhong Wei,Liu-jie Xu,Ji-wen Li,Nan-nan Wang and Feng Mao | | | 2021,50(1):102-110 [Abstract(797)] [View PDF 19.67 M (1614)] | | | | | Preparation and Analysis of Nanoporous Soft Magnetic Film Core | | | Lv Hui | | | 2021,50(1):111-115 [Abstract(709)] [View PDF 814.36 K (1337)] | | | | | Expansion Mechanism of Vacancy in alpha-Ti under Tensile Loading | | | Li Junye,Song Juncheng,Zang Xiang,Zhao Weihong and Zhang Xinming | | | 2021,50(1):116-122 [Abstract(735)] [View PDF 2.00 M (1539)] | | | | | Study on Raman Size Effect of Silicon Nanocrystals Embedded in Amorphous Matrix | | | Chang Gengrong,Liu Mngxia,Ma Fei,Meng Yu and Xu Kewei | | | 2021,50(1):123-128 [Abstract(799)] [View PDF 561.13 K (1412)] | | | | | Effect of Mn on Microstructure and Properties of 6061 Aluminum Alloy Casting and Rolling Plate | | | Wang Hongbin,Zhang Xinyu,Li Shengli,Xu Zhen,Song Hua,Lian Fabo and Chen Xingyu | | | 2021,50(1):129-137 [Abstract(866)] [View PDF 12.83 M (1565)] | | | | | Preparation of Structurally Ordered Intermetallic Pt3Co Nanowires and Electrocatalytic Performance for Oxygen Reduction Reaction | | | Wu Qifan,Chen Zihao,Zhang Haiqing and Su Yikun | | | 2021,50(1):138-144 [Abstract(830)] [View PDF 1.57 M (1425)] | | | | | Effect of Microalloying Addition on Mechanical Properties of Ni-W Coating | | | Cheng Lu,Wang Yaqiang,Zhang Jinyu,Liu Gang and Sun Jun | | | 2021,50(1):145-152 [Abstract(781)] [View PDF 2.36 M (1441)] | | | | | Luminescent spetra regulation mechnism of (Sr1-xMex)2SiO4:Eu | | | Wang Yu,Luo Lan,Guo Rui,Zhang Peng Peng and Gao Ming Yuan | | | 2021,50(1):153-159 [Abstract(940)] [View PDF 1.38 M (1343)] | | | | | Numerical Simulation of PIM Filling Process of Ultra-fine WC-Co Round Bar with Large Aspect Ratio | | | Xie Xingcheng,Cao Ruijun,Li Zengde,Zhou Zenglin,Li Qing,Li Yue and Jia Bin | | | 2021,50(1):160-166 [Abstract(849)] [View PDF 3.03 M (1329)] | | | | | Effect of alloying elements on single-phase cementite prepared by mechanical alloying | | | Yue Chaohua,Zhang Qun,Huang Linghui,Chen Xi,Jiang Jianqing and Tu Yiyou | | | 2021,50(1):167-171 [Abstract(830)] [View PDF 1.18 M (1360)] | | | | | Study on the Improvement of Hydrogen Absorb/desorb Properties and Anti-disproportionation performance of Zr1-XCoNbx (x = 0-0.2) alloys | | | LUO Linling,YE Xiaoqiu,ZHANG Guanghui and SANG Ge | | | 2021,50(1):172-178 [Abstract(1015)] [View PDF 868.24 K (1230)] | | | | | The Simulation Study of the Stress State of Zirconium Alloy Grains with Different Orientations at 500 °C Superheated Steam | | | Zhou Zhihao,Hu LIjuan,Li Xiaojian,Yao Meiyi,Xie Yaoping and Zhou Bangxin | | | 2021,50(1):179-186 [Abstract(692)] [View PDF 1.06 M (1419)] | | | | | Effect of Si and Mn on Microstructure and Tensile Properties of Austenitic Stainless Steel | | | LU Chengxu,YI Haoyu,LIANG Tian,WANG Min,XUE Hailong,MA Yingche and LIU Kui | | | 2021,50(1):187-194 [Abstract(1091)] [View PDF 33.08 M (2000)] | | | | | Oxidation behavior of Ta-Ti-Al-W alloy at 1000℃ | | | 李佳欣,Chenyuhong,Baizhangjun,Lining and Chengyuewei | | | 2021,50(1):195-200 [Abstract(806)] [View PDF 1.63 M (1450)] | | | | | Effects of Cu and/or Zn addition on the grain size and microstructure of Mg | | | Yuan Guangyu,You Guoqiang,Zai Le,Tong Xin,Li Weirong and Long Siyuan | | | 2021,50(1):201-211 [Abstract(1005)] [View PDF 4.41 M (1358)] | | | | | Hot deformation behavior of as-cast GH4169 alloy and comparison of three constitutive models | | | Zhang Bing,Yue lei,Chen Hanfeng,Zhang Zhijuan,Liu Pengru and Zhao Fenfen | | | 2021,50(1):212-222 [Abstract(1032)] [View PDF 2.24 M (1434)] | | | | | Studies on the permeation and retention behavior of deuterium in tungsten-copper compound material | | | YanJun,Ye Xiaoqiu,Jiang Chunli,Li Qiang,Rao Yongchu,Wu Jiliang,Wang Xuefeng,Chen Changan and Chen Xiaohong | | | 2021,50(1):223-228 [Abstract(717)] [View PDF 2.16 M (1419)] | | | | | Integrated Computational Materials Engineering(ICME) for developing the graded cemented carbides | | | Tian Zhihao,Peng Yingbiao,Yan Lianwu,Long Jianzhan,Zhou Shuzhu and Tang Jun | | | 2021,50(1):229-234 [Abstract(882)] [View PDF 1.76 M (1360)] | | | | | Composition Optimization Design for Novel Co-based Deformed Superalloy Aided by Phase Diagram Calculation Approach | | | Wu Gang,Wang Tao,Shen Jianyun,Wei Jie,Wu Bo,Huang Yongzhang and Yuan Xuetao | | | 2021,50(1):235-241 [Abstract(820)] [View PDF 1.62 M (1426)] | | | |
材料工艺 | | | Research on Dynamic Shock Response Behavior of Al-Zn-Mg-Cu Aluminum Alloy | | | Dan Huang,Zhuo Li,Xudong Zhou,Fangtong Yuan and Wu Zhao | | | 2021,50(1):242-248 [Abstract(968)] [View PDF 2.58 M (1385)] | | | | | Fabrication and characterization of radially graded porous titanium/tantalum via selective laser melting | | | Gao Ruining,Xiong Yinze,Zhang Hang,Dong Lanlan,Li Jiantao and Li Xiang | | | 2021,50(1):249-254 [Abstract(958)] [View PDF 3.17 M (1429)] | | | | | Effect of Heat Treatment on microstructure and mechanical Properties of Inconel 718 alloy fabricated by selective laser melting | | | Zhang Rong,Liu Zhongqiang,Huang Jiahao,Zhu Quanli and Xiao Zhiyu | | | 2021,50(1):255-262 [Abstract(925)] [View PDF 3.24 M (1386)] | | | | | Effect of heat treatment and melting method changing on AlCoCrFeNiTi0.2 high entropy alloy | | | Zhang Lu and Zhang Yong | | | 2021,50(1):263-270 [Abstract(910)] [View PDF 2.20 M (1471)] | | | | | Effects of Isothermal Heat Treatment on Mechanical Properties of U-2Nb Alloy | | | Rui Keqiang,Yin Jiaqing,Mo Wenlin and Fa Tao | | | 2021,50(1):271-278 [Abstract(871)] [View PDF 11.98 M (1573)] | | | | | Study on electrochemical dissolution and precipitation separation of W-Re alloy | | | Chen Kunkun,Cao Qigao,Meng Hanqi,Zhang Bosheng,Zhao Panchao and Dang Rui | | | 2021,50(1):279-285 [Abstract(1025)] [View PDF 4.41 M (1385)] | | | | | Study on SPS Sintering of Cu @ Ag Coated Powder and Its Dense Mechanism | | | Luo Guoqiang,LvShijun,Li Yuan,Hu Jianian,Zhang Jian,Sun Yi and Shen Qiang | | | 2021,50(1):286-290 [Abstract(913)] [View PDF 1.52 M (1361)] | | | | | Plasma-sprayed YSZ/NiCrAlY protective coating and its resistance to molten Al-Si corrosion | | | wangxin,xuezhaolu,nizhenhang,liuxia and zhangshihong | | | 2021,50(1):291-298 [Abstract(978)] [View PDF 7.30 M (1374)] | | | | | Effect of Heat Treatments on Microstructure and Property of Electron Beam Weldment of Ti650 Alloy | | | 张菁丽,Xin Shewei,Zhou Wei,Zhang Yongqiang,Guo Dizi,Li Qian and Mao Xiaonan | | | 2021,50(1):299-303 [Abstract(739)] [View PDF 1.93 M (1417)] | | | | | Effect of escape-target method of deposited particles on microstructure of pure aluminum coating | | | YANG Chao,WANG Rong,HAO Juan,WANG Di and JIANG Bailing | | | 2021,50(1):304-310 [Abstract(772)] [View PDF 2.71 M (1294)] | | | | | Component Mass Ratio, Microstructure and Performance of Micro-arc Oxidation coating | | | zhang weiyi,du yunhui,wang yujie,zhu yu,lu qin and zhang peng | | | 2021,50(1):311-319 [Abstract(807)] [View PDF 5.72 M (1393)] | | | | | A study on microstructure evolution and mechanical properties of 51.1Zr-40.2Ti-4.5Al-4.2V during tensile deformation | | | Yang Qiuyue,Tan Yuanbiao,Yin Cunhong,Liu Wenchang,Xiang Song and Zhao Fei | | | 2021,50(1):320-332 [Abstract(817)] [View PDF 4.48 M (1435)] | | | | | Effect of thermal cycling on interface and properties of Sn58Bi(nano Ti)/Cu solder joints | | | Jiang Nan,Zhang Liang,Sun Lei,Wang Fengjiang,Long Weimin and Zhong Sujuan | | | 2021,50(1):327-332 [Abstract(756)] [View PDF 2.81 M (1359)] | | | |
评述 | | | Perspective on industrial applications and research progress of high-entropy alloys | | | LU Yidi,ZHANG Xiaoyong,HOU Shuo,HE Weifeng,WANG Hui and LU Zhaoping | | | 2021,50(1):333-341 [Abstract(1920)] [View PDF 1.25 M (1569)] | | | | | Recent Progress of Nb-based Oxide Anode Materials towardLithium-ion Capacitors | | | Qin Li,Zhu Shuhao,Liu Yang,Hou Linrui and Yuan Changzhou | | | 2021,50(1):342-348 [Abstract(866)] [View PDF 2.15 M (1402)] | | | | | THE FEASIBILITY ANALYSIS OF SIC FIBER REINFORCED SUPERALLOY-BASED COMPOSITE | | | JIANG He,WANG Fa,LI Xin and DONG Jianxin | | | 2021,50(1):349-360 [Abstract(747)] [View PDF 7.06 M (1499)] | | | | | Research Progress in Effect of Alloying on Electrochemical Corrosion Rates of Mg Alloys | | | Liu Yuxiang | | | 2021,50(1):361-372 [Abstract(963)] [View PDF 2.88 M (1618)] | | | |
|
