| |
Volume 45,Issue 7,2016 Table of Contents
材料科学 | | | Influence of Nickel-based Alloys Mechanical Properties on Mechanochemical Effect at Crack Tip in High Temperature Water Envir | | | Yang FuQiang,Xue He,Zhao Lingyan and Fang Xiurong | | | 2016,45(7):1641-1646 [Abstract(1595)] [View PDF] | | | | | Crystal plasticity finite element study of incompatible deformation behavior in two phase microstructure in near β titanium a | | | Tang Bin | | | 2016,45(7):1647-1653 [Abstract(1728)] [View PDF] | | | | | Compression deformation mechanisms of nanocrystalline Ni prepared by plasma evaporation method | | | Zhu Rongtao | | | 2016,45(7):1654-1658 [Abstract(1606)] [View PDF] | | | | | In-situ Cr-doped Alumina Nanorods Powder Prepared by Hydrothermal Method | | | he xuan meng,zhu zhen feng,liu hui and fu lu | | | 2016,45(7):1659-1663 [Abstract(1640)] [View PDF] | | | | | Anti-arc erosion properties of Ag-La2Sn2O7/SnO2 contacts | | | ZHANG LINGJIE,Shen Tao,Shen Qianhong,Zhang Ji,Chen Lawson,Fan Xianping and Yang Hui | | | 2016,45(7):1664-1668 [Abstract(1680)] [View PDF] | | | | | Fabrication, Characterization and Properties of Super-paramagnetic Reduced Graphene Oxide/Fe3O4 Hollow Sphere Nanocomposites | | | donghao | | | 2016,45(7):1669-1673 [Abstract(1556)] [View PDF] | | | | | Microstructure evolution and corrosion performance of magnesium alloy sheets | | | yangqingshan,yangqingshan | | | 2016,45(7):1674-1677 [Abstract(1305)] [View PDF] | | | | | Study of Ti and Al interaction on microstructures and mechanical properties of the Nb-Ti-Si-Al alloys | | | Sun Zhiping,Guo Xiping and Tian Xiaodong | | | 2016,45(7):1678-1682 [Abstract(1430)] [View PDF 504.65 K (1629)] | | | | | Microstructures of as-fabricated and post heat treated Ti-47Al-2Nb-2Cr alloy produced by Selective Electron Beam Melting (SEBM) | | | Yang Guangyu,Jia Wenpeng,Zhao Pei,Jia Liang,Liu Nan,WangJian and Tang Huiping | | | 2016,45(7):1683-1686 [Abstract(1331)] [View PDF] | | | | | Microstructure Evolution of a Novel Al–Cu–Li–Ce Alloy During Homogenization | | | Yu Xinxiang,Yin Dengfeng,Yu Zhiming,Zhang Yiran and Li Shufei | | | 2016,45(7):1687-1694 [Abstract(1445)] [View PDF] | | | | | Isothermal oxidation behavior of TiAl–Nb–W–B-Y alloys with different lamellar colony sizes | | | Jie Liu and Xiangyi Xue | | | 2016,45(7):1695-1699 [Abstract(1326)] [View PDF] | | | | | Controlled synthesis of cobalt sulfide nanocrystalline by Ultrasonic Spray Pyrolysis process | | | a.College of Science,sunlili,hanxiangyu,xiachuanhui and wuhaiying | | | 2016,45(7):1700-1704 [Abstract(1351)] [View PDF] | | | | | Constitutive equation for WC-Co functionally graded cemented carbides and application | | | Huang Zi-qian and He Yue-hui | | | 2016,45(7):1705-1708 [Abstract(1484)] [View PDF 494.39 K (1989)] | | | | | Environmentally friendly Copper metallization of ABS by Cu-catalysed electroless process | | | Qiuxian Shen,Zhuang Miao and Xu Wang | | | 2016,45(7):1709-1713 [Abstract(1326)] [View PDF] | | | | | Toughening Effect of ZrB2 in Al2O3-ZrB2 Nanocomposite Ceramics | | | Wang Xiaomin | | | 2016,45(7):1714-1718 [Abstract(1862)] [View PDF 667.72 K (1995)] | | | | | Effect of Ru on Partitioning of Elements in γ/γ′ Phase and High Temperature Creep Properties of a Fourth Ni-based Single Crystal Superalloy | | | LUO Yu-shi,ZHAO Yun-song,YANG Shuai,Ge Bing-hui,ZHANG Jian and TANG Ding-zhong | | | 2016,45(7):1719-1725 [Abstract(1991)] [View PDF] | | | | | Phase transformation behavior and mechanical properties of Ti-10V-2Fe-3Al alloy subjected to low temperature aging | | | chenwei | | | 2016,45(7):1726-1731 [Abstract(1315)] [View PDF] | | | | | The Critical Conditions for Dynamic Recrystallizati0n of Ti-5553 alloy on hot deformation | | | zhouwei | | | 2016,45(7):1732-1735 [Abstract(1365)] [View PDF] | | | | | Micrstructure and Formation Mechanism of Alpha-case in Cast Titanium Alloy | | | Fang Canfeng | | | 2016,45(7):1736-1739 [Abstract(1706)] [View PDF] | | | | | Effect of Nb on high temperature strength and ambient ductility of high-Al containing cast TiAl base alloys | | | lihaizhao | | | 2016,45(7):1740-1744 [Abstract(1386)] [View PDF] | | | | | Effect of cooling rates on microstructures evolution and nanohardnessof rapidly solidified Ti-48Al-4Cr alloy | | | Zhu Dongdong,Dong duo,Zhou Zhaozhong,Ni Chengyuan,He Qing,Wang Hongwei and Wei Zunjie | | | 2016,45(7):1745-1748 [Abstract(1827)] [View PDF 1.49 M (1801)] | | | | | Microstructure and mechanical properties of SiC/Ti diffusion bonding joints under electric field | | | Wang Qing and Sun Dongli | | | 2016,45(7):1749-1754 [Abstract(1867)] [View PDF] | | | | | Affecting Mechanism of Doping Fe in Spinel LiNi0.5Mn1.5O4 | | | liuguoqiang | | | 2016,45(7):1755-1759 [Abstract(1581)] [View PDF] | | | | | Fiber laser welding of bimetallic plate and the analysis of the corrosion property | | | Gou Ningnian,Zhang Jianxun and Li Zhenggang | | | 2016,45(7):1760-1764 [Abstract(1475)] [View PDF] | | | | | Damage Evolution of Tungsten as Plasma Facing Material for Fusion Device | | | Chong Fali,Chen Junling and Zheng Xuebin | | | 2016,45(7):1765-1770 [Abstract(1902)] [View PDF 516.89 K (1820)] | | | | | The stress corrosion cracking behavior of reactor components welded 304L stainless steel in deoxygenized and chloride ions so | | | Peng DeQuan | | | 2016,45(7):1771-1776 [Abstract(1232)] [View PDF] | | | | | Microstructure and Magnetostriction of Fe83Ga17R0.6(R=Ce,Tb and Dy) Alloys | | | Yao Zhanquan,Tian Xiao,Hao Hongbo,Wu Shuangxia,Jiang Liping and Zhao Zengqi | | | 2016,45(7):1777-1781 [Abstract(1446)] [View PDF] | | | | | Analysis of High Temperature Mechanical Properties and Fracture Behaviors on Monel-400 Alloy | | | chenzhongyi,wangwenjun,mayonglin,xignshuqign and luhengchang | | | 2016,45(7):1782-1787 [Abstract(1257)] [View PDF] | | | | | Study on thermal reliability of Gold Filmon the surface of Tungsten Helix | | | Fan Ailing,Li Weitian,Xue Yingkun,Chang Suijie and Ma Jie | | | 2016,45(7):1788-1792 [Abstract(1268)] [View PDF] | | | |
材料工艺 | | | Characterization of TiNi alloy prepared by spark plasma sintering | | | maweigang,Qihuarong,FengZhongxue,Wang xiao qi,Sh iQing nan,Chen Liang wei and Yang Gang | | | 2016,45(7):1793-1797 [Abstract(1640)] [View PDF] | | | | | The effect of Ti, Zr composite microalloying on anti-fading performance of grain refinement | | | yuaiwu and yangchenggang | | | 2016,45(7):1798-1803 [Abstract(1798)] [View PDF] | | | | | Influence of a Rotating Magnetic Field on Laser Melting Titanium Alloy Melt Pool | | | Yang Guang,Xue Xiong,Qin Lanyun and Wang Wei | | | 2016,45(7):1804-1810 [Abstract(1642)] [View PDF 634.41 K (1678)] | | | | | In situ synthesis of Ti4AlN3 reinforced with Al2O3 particles by hot isostatic pressing | | | zhengzhuo,sunweimin and liuzheng | | | 2016,45(7):1811-1815 [Abstract(1557)] [View PDF] | | | | | Effect of heating rate on the preparation of NiTi alloy during Micro-FAST | | | Zhao Dan,Yang Yi,Yang Gang and Yin Deqiang | | | 2016,45(7):1816-1820 [Abstract(1577)] [View PDF] | | | | | Influence of Cathodic Arc Plasma Titanizing on Tribological Properties of 316L Stainless Steels | | | FU Zhiqiang,Shi Jiajia,Yue Wen,Wang Chengbiao,Peng Zhijian,Yu Xiang and Kang Jiajie | | | 2016,45(7):1821-1825 [Abstract(1735)] [View PDF] | | | | | Effects of rare earth (Y and Ce) modified coating on structure and resistanceto oxidation of open-cell Ni-Cr-Fe alloy foam | | | pangqiu,Huzhili,zhangrong,zuoxiaoqiong and Wugaohui | | | 2016,45(7):1826-1831 [Abstract(1386)] [View PDF 647.69 K (1627)] | | | | | The study of epitaxial growth behavior of CSD-La3TaO7 | | | wangyao,lichengshan,yuzeming,fengjianqing,jinlihua,wanghui and zhangpingxiang | | | 2016,45(7):1832-1835 [Abstract(1422)] [View PDF] | | | | | Fabrication of WO3/DWCNTs composite photocatalyst with enhanced photocatalytic activity | | | Li Yesheng,Zhao Man,Zhang Weibo,Yin Yanhong and Wu Ziping | | | 2016,45(7):1836-1841 [Abstract(1342)] [View PDF] | | | | | Microstructure and mechanical properties of B4C/6061Al neutron absorber material | | | chenhongsheng and wangwenxian | | | 2016,45(7):1842-1847 [Abstract(1593)] [View PDF] | | | | | Effect of Er on microstructure and electrochemical performance of Al-Zn-In anode | | | Li Hang,Weibin,Xu Zhengbing,Zeng Jianmin,Li Heng,Chen Rong and Lu Yanyan | | | 2016,45(7):1848-1854 [Abstract(1486)] [View PDF 613.18 K (1551)] | | | | | Superplasticity of Fine-grained AZ31 Magnesium Alloy Prepared by Friction Stir Processing | | | Gaoxue | | | 2016,45(7):1855-1860 [Abstract(1314)] [View PDF] | | | | | Study of solid-liquid bonding of arc-sprayed aluminum coatings/AZ91D substrates | | | Zhao Jianhua and Jin tong | | | 2016,45(7):1861-1865 [Abstract(1393)] [View PDF] | | | | | Low-strains high temperature annealing effect on the grain boundary character distributions and the grain boundary plane distributions of Hastelloy C-276 | | | ZHANG Xiaoyu,LI Defu,GUO Shengli and ZHAO Xianming | | | 2016,45(7):1866-1870 [Abstract(1292)] [View PDF] | | | | | Thermal electron emission properties of novel W-Re mixed matrix cathodes | | | Lai Chen,Wang Jinshu,Wang Xi,Zhou Fan,Liu Wei and Yang Fan | | | 2016,45(7):1871-1875 [Abstract(1738)] [View PDF] | | | | | Preparation of PbZrO3 Modified with Ti4 Anti-ferroelectric Nano-powder and its Structure Identification | | | Yao Hai-yun and Hu Yan-hua | | | 2016,45(7):1876-1880 [Abstract(1380)] [View PDF] | | | | | Thermodynamic Analysis of Co-Y2O3 Composite Powders Prepared by Coprecipitation Method | | | qindeqing and Tang Jiancheng | | | 2016,45(7):1881-1886 [Abstract(1295)] [View PDF] | | | | | Study on Preparation, Catalytic and Antibacterial Properties of Silver-deposited Fe3O4 Nanoparticles | | | Zuo Fang | | | 2016,45(7):1887-1892 [Abstract(1392)] [View PDF] | | | | | Research on recovery of gallium in the alumina production process from high-alumina coal fly ash | | | duyan and Sun Junmin | | | 2016,45(7):1893-1897 [Abstract(1478)] [View PDF] | | | | | Diffusion bonding of U-Al sheets with micrometers thick | | | liaoyichuan,lvxuechao,zhangpengcheng,rendapeng and langdingmu | | | 2016,45(7):1898-1902 [Abstract(1761)] [View PDF] | | | |
评述
|
