| |
Volume 49,Issue 11,2020 Table of ContentsDownload Contents
材料科学 | | | Hot Deformation Behavior and Underlying Mechanism of As-cast Ti-5553 Alloy with Coarse Grain | | | Qinyang Zhao,Yongnan Chen,Yiku Xu,Leandro Bolzoni and Fei Yang | | | 2020,49(11):3653-3661 [Abstract(1359)] [View PDF 4.36 M (1581)] | | | | | Influencing Factors of Micro Deformation Behavior of Constituent Phases in Ti-6Al-4V Titanium Alloy | | | Chen Guoxing and Liu Caiyi | | | 2020,49(11):3662-3668 [Abstract(1064)] [View PDF 1012.82 K (1414)] | | | | | Experimental Investigation of Phase Equilibria in the Mo-Ru-Ti Ternary System | | | wangcuiping,wudan,lilingling,zhangjinbin,yangshuiyuan,yangmujin,hanjiajia,luyong and liuxingjun | | | 2020,49(11):3669-3675 [Abstract(972)] [View PDF 1.41 M (1358)] | | | | | Effect of TiO2 on the Viscosity and Structure of Low-fluoride CaF2-CaO-Al2O3-MgO-Li2O Slag for Electroslag Remelting | | | Ju Jiantao,Yang Kangshuai,Ji Guangheng and Zhu Zhihong | | | 2020,49(11):3676-3682 [Abstract(835)] [View PDF 594.43 K (1216)] | | | | | Influence of thermal-mechanical processing parameters on grain boundary character distribution evolution in a cold-rolled Ni-based superalloy | | | Hongbin Zhang,Chengcai Zhang,Baokun Han,Kuidong Gao,Huiping Li,Shengxue Qin,Jie Liu,Yan Wang,Peng Zhang and Haiping Zhou | | | 2020,49(11):3683-3691 [Abstract(1022)] [View PDF 2.09 M (1718)] | | | | | Effect of Warm Rolling on Microstructure and Mechanical Properties of 6061 Aluminum Alloy Cast-Rolled Sheet | | | Zhen Xu,Wei Zhang,Hongbin Wang,Xinyu Zhang,Hua Song,Shengli Li,Can Wu,Yingyu Huo and Long Zhao | | | 2020,49(11):3692-3701 [Abstract(1122)] [View PDF 7.43 M (1431)] | | | | | Microstructures and mechanical properties of tungsten particle reinforced 6061Al composites fabricated by SPS and hot rolling | | | Yang Tao,Chen Hongsheng,Wang Wenxian,Zhang Yuyang and Liu Ruifeng | | | 2020,49(11):3702-3708 [Abstract(1019)] [View PDF 9.63 M (1449)] | | | | | Phase-field simulation on the influence of cooling rate on the solidification microstructure of Mg-Gd-Y ternary magnesium alloy | | | Zhao Xueting,Shang Shan,Zhang Tianxiang,Zhang Ruijie,Wang Xianfei,Li Zhongquan and Han Zhiqiang | | | 2020,49(11):3709-3717 [Abstract(993)] [View PDF 1.28 M (1358)] | | | | | Tailoring the microstructure and mechanical properties of AZ91 alloy by rheo-rolling and heat treatment | | | Renguo Guan,Xiang Wang,Di Tie,Haobo Ren,Yuxiang Wang,Haifeng Liu,Lufei Yan and Minfang Chen | | | 2020,49(11):3718-3723 [Abstract(889)] [View PDF 1.28 M (1257)] | | | | | The numerical simulation and experimental research of magnesium alloy sheet asymmetrical rolling | | | Wang Xi,Xue Zhengkun,Yuxiaoguang and Yang Youze | | | 2020,49(11):3724-3733 [Abstract(1018)] [View PDF 3.27 M (1521)] | | | | | Effect of Hydrogen on Hydrogen Permeation and Stress Corrosion Behavior of Low Alloy Steel in Acid Gas Field | | | Wang Xia,Zhou Wenjie,Hou Duo,Jiang Huan and Hou Li | | | 2020,49(11):3734-3740 [Abstract(872)] [View PDF 1.07 M (1260)] | | | | | Preparation and mechanical properties of ZL205A alloy-infiltrated SiC foam ceramic composites | | | Qi Yushi,Wang Yanbo,Du Lanjun,Fei Yanhan and Du Zhiming | | | 2020,49(11):3741-3747 [Abstract(1008)] [View PDF 14.77 M (1644)] | | | | | Electrochemical corrosion and tribocorrosion properties of sol-gel ZrO2 nanofilms coated on stainless steel in the diverse NaCl aqueous solutions | | | Zhenhua Zhang and Guojun Ji | | | 2020,49(11):3748-3760 [Abstract(850)] [View PDF 3.41 M (1466)] | | | | | Numerical simulation of asymmetrical fluid flow and solidification during the Electron Beam Cold Hearth Re-melting(EBCHR) process of titanium alloy TA10 | | | Xu Yaoping,Chen Qipeng,Liu yuan,Shi Yaming,Qin Tiechang and Shen Houfa | | | 2020,49(11):3761-3768 [Abstract(1018)] [View PDF 780.07 K (1303)] | | | | | Hydrogen embrittlement behavior and mechanisms of Ti-6Al-4V alloy based on small punch test | | | Zhu Rongtao,Wang Xian,Li Chaoyong,Wang Xiang and Huang Pengfei | | | 2020,49(11):3769-3775 [Abstract(926)] [View PDF 8.19 M (1362)] | | | | | Stress induced martensitic transformation of as-cast TB6 titanium alloy during hot process | | | ouyangdelai | | | 2020,49(11):3776-3781 [Abstract(872)] [View PDF 30.22 M (1597)] | | | | | Design and preparation of the epoxy resin based composite board with broad-band wave-absorbing properties | | | Yuan Zhifen,Zhao Hui and Zhou Jia | | | 2020,49(11):3782-3789 [Abstract(862)] [View PDF 16.34 M (1540)] | | | | | Research on the Optimal Design and Application of Wideband TIDT Structures | | | Wang Ziping | | | 2020,49(11):3790-3795 [Abstract(939)] [View PDF 1.08 M (1336)] | | | | | The synthesize research of phases and morphology of Sm2Fe17 melt-spun ribbon | | | Kun Liu,ShuhuanWang,Yunli Feng and Yikun Zhang | | | 2020,49(11):3796-3802 [Abstract(785)] [View PDF 2.63 M (1257)] | | | | | Thermodynamic and Kinetic Study on the Nitrogen-Removing Process of High Cr Content Nickel Based Alloy | | | Wang Min,Zhang Long,Yang Yaqian,Ding Leilei,Ma Yingche and Liu Kui | | | 2020,49(11):3803-3808 [Abstract(806)] [View PDF 660.56 K (1358)] | | | | | In-Situ observations of melting and solidification processes of Ni-based superalloy U720Li | | | Zhao Guangdi,Zang Ximin and Zhao Zhuo | | | 2020,49(11):3809-3815 [Abstract(847)] [View PDF 7.31 M (1376)] | | | | | Valence electron structures analysis of S phase and the S/a interface in Al-Cu-Mg alloy | | | Qu Hua,Xu Qiaozhi,Liu Weidong and Qi Jianxue | | | 2020,49(11):3816-3821 [Abstract(712)] [View PDF 843.69 K (1177)] | | | | | Microstructure evolution of solder joints with different Pb content at ultra-low temperature | | | Wu Ming,Wang Shanlin,Sun Wenjun,Ma Bin,Chen Yuhua,Huang Yongde and ke Liming | | | 2020,49(11):3822-3827 [Abstract(755)] [View PDF 2.76 M (1163)] | | | | | Dynamic Compressive Behaviors of Aluminum-Based Abradable Seal Coatings | | | Jin Chenri,Guo Dan,Yang Suyuan and He Shuyang | | | 2020,49(11):3828-3834 [Abstract(820)] [View PDF 1.86 M (1279)] | | | | | Machine Learning Assisted Design of Isothermal Decompositon Parameters of U-Mo Alloy | | | Zhang Xuewei,Kang Shidong,Wang Zhaosong,Dong Qing,Liu Wei,Dong Qiushi,Qiao Shuai,Yang Zhiyuan,Liu Zhihua and Chen Lianzhong | | | 2020,49(11):3835-3840 [Abstract(818)] [View PDF 1.78 M (1208)] | | | | | Preparation of PtCoNi alloy nanoparticles loaded on carbon black by spray drying for catalytic oxidation of methanol | | | xuhao,lianjin,yaochen,zhaopanchao,lijigang,pangfangzhao and yiwei | | | 2020,49(11):3890-3895 [Abstract(883)] [View PDF 24.22 M (1478)] | | | |
材料工艺 | | | Microstructure and Mechanical Properties of Ultrafine-grained CoCrFeMnNiGd0.15 High-entropy Alloy Fabricated by Powder Metallurgy | | | Long Yan,Zhang Weihua,Peng Liang,Li Guiqi and Peng Haiyan | | | 2020,49(11):3841-3846 [Abstract(857)] [View PDF 9.32 M (1320)] | | | | | Preparation and sintering properties of nano WC powder by Pt catalyzed hydrogen-free carbonization | | | Chen Weicong,Tang Jiancheng and Ye Nan | | | 2020,49(11):3847-3853 [Abstract(722)] [View PDF 52.30 M (1815)] | | | | | Structures and Thermoelectric Properties Research of SnxBi0.5-xSb1.5Te3 Thermoelectric Materials | | | Yang Mingjie,Ma Zhengqing,Wang Shiye and Lan Dian | | | 2020,49(11):3854-3860 [Abstract(968)] [View PDF 1.81 M (1363)] | | | | | Lower frequency sound absorption of ultra-thin metal fiber complex film materials | | | ao qing bo,wang jian zhong,ma jun,li ye,wu chen and tang hui ping | | | 2020,49(11):3861-3864 [Abstract(723)] [View PDF 565.29 K (1168)] | | | | | Research on W-Ni-Fe-Co alloys fabricated by Selective electron beam melting from pre-alloyed powder | | | Yang Guangyu,Chen Jinghai,Liu Nan,Yang Kun,Jia Liang,Jian Wenpeng,Wang Jian and Tang Huiping | | | 2020,49(11):3865-3869 [Abstract(1026)] [View PDF 2.28 M (1238)] | | | | | Investigation on mechanical extension property of high-temperature superconducting cable at room temperature and 77 K | | | Huang Yijia,Zheng Jian and Chen Zhiyue | | | 2020,49(11):3870-3874 [Abstract(705)] [View PDF 613.44 K (1214)] | | | | | Microstructure and Mechanical Properties Study of Low Density AlTiCrNiCu High-Entropy Alloy Prepared by Spark Plasma Sintering | | | Zhu Dezhi,Wu Jipeng and Liu Shiwen | | | 2020,49(11):3875-3881 [Abstract(880)] [View PDF 2.76 M (1206)] | | | | | Formation and Mechanical Properties of Al-Mg-Sc-Zr Alloy Prepared by Selective Laser Melting | | | Chen Jinhan,Geng Yaoxiang,Hou Yu,Tang Hao,Luo Jinjie,Yu Lihua,Xu Junhua and Ju Hongbo | | | 2020,49(11):3882-3889 [Abstract(982)] [View PDF 32.69 M (1916)] | | | | | Preparation and Electromagnetic Shielding Properties of Ti3C2Tx/ glass fiber Composites | | | qinwenfeng,fujiawei,liuguochun,wangxinyuan,liyayun and fanyuhang | | | 2020,49(11):3896-3901 [Abstract(750)] [View PDF 4.06 M (1332)] | | | | | Structural features and mechanical properties of as-cast Ti-22Al-25Nb alloy | | | Yang Longchuan,Su Yan,Du Yulei and Liao Wenhe | | | 2020,49(11):3902-3908 [Abstract(896)] [View PDF 2.47 M (1215)] | | | | | Fabrication of Gradient Electronlytic Capacitors Anode Pellet Based on Multi-material Printing | | | ZHANG Lei,TIAN Dongbin,WU Quan,ZENG Yuru,ZHENG Yue and Tang Geng | | | 2020,49(11):3909-3913 [Abstract(657)] [View PDF 2.31 M (1250)] | | | | | Study on Magnetic Coupling and Bifunctional Properties of One-dimensional Co-CdSe Heterojunction Nanowires | | | Shen Haozhe,Su Yikun and Tang Jiaoning | | | 2020,49(11):3914-3918 [Abstract(722)] [View PDF 1.80 M (1174)] | | | | | Microstructure and properties of γ-TiAl fabricated by in-situ alloying assisted double-wire arc additive manufacturing | | | Liu Qi,Zhang Meng,Fu Leqi,Yang Zhenwen,Wang Ying and Wang Dongpo | | | 2020,49(11):3919-3924 [Abstract(882)] [View PDF 14.83 M (1530)] | | | | | Microstructure Evolution and Corrosion Behavior of Ti-25Ta-3Ag Alloy via Spark Plasma Sintering | | | Chen Xinghu,Zhang Junmin,Yu Yongquan,Chuan Dingze,Liu Jinkun,Yan Tingting and Chen Qinghua | | | 2020,49(11):3925-3931 [Abstract(831)] [View PDF 11.28 M (1371)] | | | | | Study on Deuterium Removal Technology in Tungsten Powder | | | YU Wenzhen,HUANG He,WANG Zhanlei,YAN Jun,YE Xiaoqiu,WANG Xuefeng,Luo Linling,FENG Chunrong,LI Bingqing,RAO Yongchu and XIAO Yao | | | 2020,49(11):3932-3937 [Abstract(828)] [View PDF 661.96 K (1215)] | | | | | Effect of Thermal Stabilization Time on Microstructure of Mushy Zone of TNM Alloy | | | Li Zhiping,Luo Liangshun,Sun Xiongkai,Yang Huimin,Liu Tong,Wang Liang,Zhang Donghui,Su Yanqing,Guo Jingjie and Fu Hengzhi | | | 2020,49(11):3938-3942 [Abstract(746)] [View PDF 2.23 M (1214)] | | | | | AlSiMg3 Alloy Formed by Selective Laser Melting | | | 侯 裕 | | | 2020,49(11):3943-3949 [Abstract(741)] [View PDF 22.94 M (1542)] | | | | | Investigation on Microstructure and Properties of WC-Ni-Fe-MoCemented Carbides | | | Zhang Fan,Zhang Jinxiang,Wen Xiaoqiang,Xiao Yingyi and Pu Jian | | | 2020,49(11):3950-3956 [Abstract(733)] [View PDF 4.49 M (1173)] | | | | | Study on Preparation Technology of Large-size Tungsten Heavy Alloy | | | Zhou Wuping,Wang Ling,Qin Yingnan,Xiong Ning,Liu Guirong and Liu Guohui | | | 2020,49(11):3957-3961 [Abstract(814)] [View PDF 1.38 M (1134)] | | | | | Study on the preparation of ammonium paramolybdate microspheres by spray drying and their calcination reduction process | | | Rong Wan,Cao Qigao,Dang Rui,Zhao Panchao,Chen Kunkun,Zhang Bosheng and Meng Hanqi | | | 2020,49(11):3962-3968 [Abstract(715)] [View PDF 16.01 M (1323)] | | | | | Study on the inhomogeneous microstructures and mechanical properties of additively manufactured 2219 aluminum alloy | | | LI Quan,LUO Zhiwei,FENG Chen,ZHANG Ruize,Song Quan,YU Bo and WANG Fude | | | 2020,49(11):3969-3976 [Abstract(1009)] [View PDF 24.87 M (1630)] | | | |
评述 | | | Progress on carbon aerogels as the supports of fuel cell catalysts | | | Zhang Zhen,Zhao Shuang,Chen Guobing,Li Kunfeng,Fei Zhifang,Luo Zhongyi and Yang Zichun | | | 2020,49(11):3977-3986 [Abstract(1070)] [View PDF 4.77 M (1429)] | | | | | Progress in direct preparation of graphene on the surface of dielectric substrate by CVD | | | Li Wei,Liu Lintao,Li zhengxian,Wang Yanfeng,Liu Jiahaun and Li Longbo | | | 2020,49(11):3987-3997 [Abstract(802)] [View PDF 2.17 M (1212)] | | | | | Progress of LiEuTiO4 for Anode Materials in Lithium-ion Batteries with Fast Charging | | | Zhao Hong,Wang Li and He Xiang-ming | | | 2020,49(11):3998-4004 [Abstract(864)] [View PDF 1022.23 K (1305)] | | | |
|
