| |
Volume 47,Issue 4,2018 Table of Contents
材料科学 | | | Effect of Atomization Gases on the Elastic Modulus of Thermal-sprayed NiCr Coatings | | | Nie Guanglin,Bao Yiwang,Wan Detian and Liu Xiaogen | | | 2018,47(4):1025-1030 [Abstract(1228)] [View PDF] | | | | | Effects of Ti Activity on Mechanical Performance and Microstructure of Al2O3/AgCuTi/Fe-Ni-Co Brazed Joints | | | Xin Chenglai,Li Ning,Yan Jiazhen,Cao Yongtong and Liu Wenbo | | | 2018,47(4):1031-1036 [Abstract(1214)] [View PDF] | | | | | Quantitative Analysis of Microstructural Evolution at Cu/Al Solid-Liquid Bonding Interface | | | Wang Chan,Liang Shuhua,Zou Juntao,Jiang Yihui and Yang Qing | | | 2018,47(4):1037-1042 [Abstract(1209)] [View PDF] | | | | | Ablation Resistance of APS Sprayed Mullite/ZrB2-MoSi2 Coating for Carbon/Carbon Composites | | | Han Wei,Liu Min,Deng Chunming,Liu Xuezhang,Zeng Dechang and Zhou Kesong | | | 2018,47(4):1043-1048 [Abstract(1079)] [View PDF] | | | | | Thermal Conductivity of Open Cell Aluminum foam and Its Application as Advanced Thermal Storage Unit at Low Temperature | | | Kong Chunhui,Chen Liubiao,Wu Xianlin,Zhou Yuan and Wang Junjie | | | 2018,47(4):1049-1053 [Abstract(1012)] [View PDF] | | | | | Study of Dislocation Structure in a Single Crystal Nickel Base Duiring High Cycle Fatigue | | | Sui LI | | | 2018,47(4):1054-1058 [Abstract(923)] [View PDF] | | | | | Fabrication and properties of micro-arc oxidation coatings on sintered NdFeB permanent magnets | | | Jilin Xu,Qifei Xiao,Dingding Mei,Zhenchen Zhong,Yunxiang Tong,Yufeng Zheng and Li Li | | | 2018,47(4):1059-1063 [Abstract(1145)] [View PDF] | | | | | The effect of texture on the performance of Mg-air battery based on rolled Mg-3Al-1Zn alloy sheet | | | Zhao Yanchun,Huang Guangsheng,Cheng Zhang,Chen lin,Han Tinzhuang and Pan Fusheng | | | 2018,47(4):1064-1068 [Abstract(1140)] [View PDF] | | | | | Effect of Ti3AlC2 content on mechanical properties of Ti3AlC2/ZA27 composites | | | Hai-Yan Li,Yang Zhou,Ao Cui,Shi-Bo Li,Zhen-Ying Huang and Hong-Xiang Zhai | | | 2018,47(4):1069-1074 [Abstract(1019)] [View PDF] | | | | | Enhanced high temperature corrosion resistance of Al2O3/Alcomposite coating on γ-TiAl alloy | | | Xu Yi,Liang Wenping,Miao Qiang,Wang Ling,Ren Beilei,Cui Shiyu,Xia Jinjiao and Yao Zhengjun | | | 2018,47(4):1075-1081 [Abstract(1070)] [View PDF] | | | | | Synthesis of stoichiometric titanium carbide by a combination of carbothermal reduction and the molten salt method and its characterization | | | SongYunfei,Zhu Hongxi,Deng Chengji,Yuan Wenjie and Ding Jun | | | 2018,47(4):1082-1088 [Abstract(1013)] [View PDF] | | | | | Rapid and Green synthesis of monodisperse silver nanoparticles using mulberry leaf extract | | | Chunfa Dong,Fei Cheng,Xianglin Zhang,Xiangjie Wang,Xiuzhi Yang and yuan bin | | | 2018,47(4):1089-1095 [Abstract(1004)] [View PDF] | | | | | Phase Transformation Kinetics of Cu-Be-Co-Zr Alloy during Aging Treatment | | | Zhou Yanjun,Song Kexing,Xing Jiandong,Liu Yong and Yang Shaodan | | | 2018,47(4):1096-1099 [Abstract(1083)] [View PDF] | | | | | Comparison of microstructure and tribological behaviors of CrAlN and CrN film- deposited by DC magnetron sputtering | | | Ren Xingrun,Huang Zhu,Liu Meixia,Jiangao Yang and Hao Chen | | | 2018,47(4):1100-1106 [Abstract(1105)] [View PDF] | | | | | Study of oxidation behavior of NiTi alloy under low oxygen partial pressure | | | Shao Mingzeng,Zhao Xu and Yang Hongbo | | | 2018,47(4):1107-1112 [Abstract(1057)] [View PDF] | | | | | Photocatalytic Activity of Au-TiO2 Nanofilms by Magnetron Sputtering | | | Shaoqi Kong,Xuanmin Song,Chunwang Zhang,Wei Wang and Guochao Yan | | | 2018,47(4):1113-1118 [Abstract(1067)] [View PDF] | | | | | Plasticity and microstructure of TC4 alloy subjected to the high magnetic field tensile test | | | Li Guirong,Wang Fangfang,Wang Hongming and Huang Chao | | | 2018,47(4):1119-1123 [Abstract(990)] [View PDF] | | | | | Effect of one pass ECAP on Microstructure and Properties of Commercial Purity Zirconium | | | Jing Feifei,Yang Xirong,Liu Xiaoyan,Luo Lei and Zhu Zheng | | | 2018,47(4):1124-1129 [Abstract(961)] [View PDF] | | | | | The Experimental Study Marine 5083 Aluminium Alloy Protective Plate forPulsed Laser Remanufacturing | | | Ren Weibin,Zhou Jinyu,Chen Jufang,Chen Guoyan and Fang Jinxiang | | | 2018,47(4):1130-1136 [Abstract(926)] [View PDF] | | | | | Simulation of shear force test for Zirconium-Titanium-steel Clad Plate by cohesive element method | | | zhoubinbin,qiuweiguang,zhangbojun,yecheng,hexiaohua and zhouchangyu | | | 2018,47(4):1137-1142 [Abstract(1083)] [View PDF] | | | | | Hot deformation behavior ofSCu-1.0%Zr-0.15%Y alloy with high Zr content | | | Tian Ka and Tian Baohong | | | 2018,47(4):1143-1148 [Abstract(917)] [View PDF] | | | | | Micromechanical Analysis of the Influence of Non-ellipsoidal TiB2 Particles on the Equivalent Elastic Property of the Composite Ceramics | | | Fu yunwei,Ni Xinhua,Liu Xiequan,Zhang Long and Chen Cheng | | | 2018,47(4):1149-1153 [Abstract(1082)] [View PDF] | | | | | Theoretical Study on Electronic Structure and Ductility of La and Zr Co-doped Gamma-TiAl Based Alloys | | | Song Qing-Gong,Zhao Junpu,Gu Weifeng,Jiang Qingjie,Yang Baobao,Guo Yanrui and Hu Xuelan | | | 2018,47(4):1154-1159 [Abstract(898)] [View PDF] | | | | | Giant Magneto-Impedance Properties of Quenched Amorphous FeNiCrSiB/Cu/FeNiCrSiB Sandwiched Ribbon | | | Shao Xianyi,Chen Weiping,Zhong Binquan and Xie Jiawen | | | 2018,47(4):1160-1165 [Abstract(1102)] [View PDF] | | | | | Microstructure Analysis of Copper Particle Deposited on Aluminum by Cold Spray | | | MAGUANGLU,KONG LINGYAN,LI TIEFAN,Nuria Cinca,Josep M. Guilemany and XIONG TIANYING | | | 2018,47(4):1166-1173 [Abstract(1047)] [View PDF] | | | |
材料工艺 | | | The research of aluminum alloy indirect squeeze casting process based on response surface method | | | Chen Liwen,Hou Hua,Jin Yuchun,Zhao Yuhong and Kang Yongsheng | | | 2018,47(4):1174-1179 [Abstract(1048)] [View PDF] | | | | | Role of TiN inclusion on fatigue crack growth behavior of alloy 690 | | | Chen Kai,Du Donghai,Zhang Lefu,Shi Xiuqiang and Xu Xuelian | | | 2018,47(4):1180-1184 [Abstract(972)] [View PDF] | | | | | Effect of Rare Erath Ce on Thermal Performance of Al-Mg-Ce Alloy fuels | | | Yi Huan,Cai Shuizhou and Zou Hui | | | 2018,47(4):1185-1191 [Abstract(1082)] [View PDF] | | | | | The microstructure and mechanical properties of a 2050 Al-Li alloy sheet | | | Ye Zhihao,Zhu Ruihua,Li Jinfeng,Chen Yonglai and Zhang xuhu | | | 2018,47(4):1192-1198 [Abstract(1077)] [View PDF] | | | | | Influence of deposition atmosphere on structure and properties of Mo2FeB2-based cermet coatings produced by electro-spark deposition | | | Wei Xiang,Chen Zhiguo,Zhong Jue,Huang Qisheng,Zhang Yi and Zhang Yulong | | | 2018,47(4):1199-1204 [Abstract(1144)] [View PDF] | | | | | Effect of flux-cored ingredients and welding parameters on porosity sensitivity of ENiCrMo3T0-4 flux-cored wire | | | Wang Heng and Li Zhuoxin | | | 2018,47(4):1205-1209 [Abstract(1094)] [View PDF] | | | | | The static and dynamic mechanical properties of 20Zr-70Ti-6Al-4V alloy | | | Nie Yangyang,Cheng Xingwang,Nie Yukun and Liu Riping | | | 2018,47(4):1210-1215 [Abstract(1016)] [View PDF] | | | | | Effect of Combined Addition of Grain Growth Inhibitors on the WC-12Co Coating | | | Wang Xuezheng,Wang Haibin,Liu Xuemei,Yang Tao,Zhan Wangbin and Song Xiaoyan | | | 2018,47(4):1216-1220 [Abstract(929)] [View PDF] | | | | | Effect of Heat Treatment in α+β zone on Fracture Toughness of Titanium Alloy | | | Guo Ping,Zhao Yongqing,Zeng Weidong,Hong Quan,Mao Xiaonan,Jia Weiju and Zhang Yongqiang | | | 2018,47(4):1221-1225 [Abstract(1069)] [View PDF] | | | | | The research of the effects of prerecovery to aluminum alloy Al-10.78Zn-2.78Mg-2.59Cu-0.22Zr-0.047Sron microstructure and properties | | | Ding Qing and Xu Xiaojing | | | 2018,47(4):1226-1231 [Abstract(993)] [View PDF] | | | | | Room-Temperature Compressive Properties and Microstructure Evolution of High-Strength Ti-26 Titanium Alloy | | | Yang Haiying and Liu Quanming | | | 2018,47(4):1232-1237 [Abstract(873)] [View PDF] | | | | | The influence of laser treatment on the microstructure and properties of YSZ thermal barrier coatings | | | Liu Lintao,Li Zhengxian,Zong Yangyang,Hu Zhen and Li Jiangtao | | | 2018,47(4):1238-1242 [Abstract(864)] [View PDF] | | | | | Study on transformation of phase structure and Microstructure for Ti-1300 alloy during isothermal aging | | | Wan Mingpan,Ma Rui and Zhao Yongqing | | | 2018,47(4):1243-1247 [Abstract(1077)] [View PDF] | | | | | Effects of Ru Additions on the Microstructures of the Ni-based Single Crystal Superalloys | | | Du Yunling,Niu Jianping,Wang Xinguang,Liu Jinlai,Liu Jide,Zhou Yizhou,Jin Tao and Sun Xiaofeng | | | 2018,47(4):1248-1253 [Abstract(1055)] [View PDF] | | | | | Effect of Thermal Oxidation Duration on Microstructure and Properties of Ti6Al4V | | | Zou Jiaojuan,Lin Naiming,Qin Jianfeng,Wang Zhenxia,Ma Yong,Tian Wei,Yao Xiaofei,Wang Zhihua and Tang Bin | | | 2018,47(4):1254-1260 [Abstract(972)] [View PDF] | | | | | Microstructure Evolution of Low-alloy Bainite Wear-resistant Cast Steel with Rare Earth in Tempering Process | | | Ji Yunping,Ren Huiping,Hou Jingchao,Song Yanqing and Liu Xinhua | | | 2018,47(4):1261-1265 [Abstract(913)] [View PDF] | | | | | Micro defects analysis of 3D-Cf/Al composites by vacuum pressure infiltration | | | Nie Mingming,Xu Zhifeng,Yu Huan,Wang Zhenjun and Cai Changchun | | | 2018,47(4):1266-1274 [Abstract(986)] [View PDF] | | | | | Influence of target current density at glow-arc discharge transitional section on microstructure and properties of TiN films | | | Hao Juan and JIANG Bailing | | | 2018,47(4):1275-1280 [Abstract(1030)] [View PDF] | | | | | Research on Fabrication and Properties of Aluminosilicate Fiber-reinforced SiO2 Composites | | | Chen Jian,Wang Yi,Huang He,Meng Haidong and Wang Xiaoliang | | | 2018,47(4):1281-1286 [Abstract(1216)] [View PDF] | | | | | Synthesis and characterization of MnO/C micro-nano composites | | | ZHOU zhanghua,ZHAO wurui,ZHAO huihui and ZHANG lijuan | | | 2018,47(4):1287-1292 [Abstract(1217)] [View PDF] | | | | | A Study on Microstructure and Hot Deformation Behaviorof As-extruded AZ63M Magnesium Alloy | | | DANG Jing-tao,JIANG Zhu-zhong,REN Ling-bao,YIN Dong-di and QUAN Gao-feng | | | 2018,47(4):1293-1301 [Abstract(963)] [View PDF] | | | | | Preparation and optical properties of Co doped ZnAl2O4 nanoparticles | | | Wu Xiao-juan,WEI Zhi-qiang,Chen Xiu-juan,Feng Wang-jun,Yang Hua,Jiang Jin-long and Yuan Li-hua | | | 2018,47(4):1302-1307 [Abstract(942)] [View PDF] | | | | | The effects of ingot casting pre-precipitation treatment on the Al-4.3Zn-1.7Mg-0.17Zr (wt.%) alloy structure and properties | | | nieying | | | 2018,47(4):1308-1313 [Abstract(829)] [View PDF] | | | | | Tribological Behaviors of Ceramic Coatings Fabricated by Micro-arc Oxidation with Additions of SiC Micro-particles for Ti-6Al-4V Alloys | | | Liu Fengbin,Sun Dachao,Cui Yan,Cao Leigang and Yang Yue | | | 2018,47(4):1314-1318 [Abstract(1050)] [View PDF] | | | | | Investigation on solidification microstructure and properties of aluminum alloy impeller produced by centrifugal counter-gravity casting | | | Li Xinlei,Xia Jin and Hao Qitang | | | 2018,47(4):1319-1324 [Abstract(1061)] [View PDF] | | | |
|
